How to Repair Plastic Bumper Scratches
- Apply Masking Tape. Mask off areas around the damaged area that you do not want to be hit by spray paint.
- Sand Bumper. Using firm pressure, sand the damaged area of the bumper until you have smoothed the scratches out.
- Clean Panel. Wipe down the panel with a cleaning towel, then clean the entire area with wax and grease remover.
- Fill Scratches. If you find any scratches that will not sand out, fill them with a thin layer of scratch-filling putty.
- Scuff Repair Area. Using a grey scuff pad, scuff about 10 inches around the repair area. This will help the paint stick and be more durable over time.
- Prime Bumper. Apply a thin layer of primer, wait two minutes, then apply a heavier layer of primer until you have covered any areas exposed by sanding.
- Paint Bumper. Sand the primer using fine-grit sandpaper with light pressure until it feels smooth. Apply multiple coats of paint from a distance of about 10-12 inches.
- Clearcoat Layer. Give the paint five minutes to dry, then apply a light layer of clearcoat. ...
- Did you make this project? Share it with us! We have a be nice policy. Please be positive and constructive.
How do you fix a scratched bumper?
- Clean the area around the scratch with dish soap to remove any dirt or surface wax.
- Examine the scratch.
- Fix a superficial scratch by simply buffing it out with a buffing compound.
- Fix a deep scratch by applying a thin layer of paint from a touch-up pen to the scratch.
How much does a scratched bumper cost to repair?
If your bumper encounters a few scratches but there’s no paint removed, it’s a clear-cost scratch that typically takes 30 to 60 minutes per panel to complete. The price typically costs $50-$200 each. This is the best-case scenario since it’s the cheapest and quickest option.
How do you remove scratches from plastic bumper?
Sanding
- Sand the portion of the car bumper with scratches. ...
- After sanding wipe the plastic car bumper panel with a clean microfiber cloth.
- Apply wax and grease remover on the entire panel.
- On areas that have not been sanded out, apply a small amount of scratch-filling putty. ...
- Allow the scratch-filling putty to harden for about 5 minutes.
How to repair your scratched plastic bumper?
- 80 and 40-grit sandpaper for stripping.
- 500 and 600-grit sandpaper for finishing.
- Rubbing alcohol, and abrasive cleaner or stripper.
- Utility blades.
- Black Body filler (for deep scratches.)
- High-quality black bumper polish.
- Polishing rags (microfiber works best.)
How do you get scratches out of black plastic bumper?
0:3414:15How to repair a scratch in a plastic bumper.#diy auto body #garage noiseYouTubeStart of suggested clipEnd of suggested clipThis I've got some 180 grit sandpaper on a little block here. And we're gonna sand this and get itMoreThis I've got some 180 grit sandpaper on a little block here. And we're gonna sand this and get it prepped out to put a little bit of a glaze putty in here to fill these crevices that are in here.
How do you repair scratches on plastic bumpers?
Answer provided byStep 1: Lightly rub the scratched area with 3,000 grit sandpaper. ... Step 2: Wipe down the surface with a microfiber cloth to get rid of any particles or debris.Step 3: Apply a polishing compound to the buffed area via another microfiber cloth.More items...
Can you repair deep scratch on plastic bumper?
0:212:35DIY: How to repair deep scratches on a car bumper? - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a sander or sanding block with a 180 grit dry sanding paper to level the surface and wipe.MoreUse a sander or sanding block with a 180 grit dry sanding paper to level the surface and wipe.
How do you remove scratches from a vinyl bumper?
Buff out the scratch with sandpaper. Wet your 3,000-grit sandpaper and gently sand the scratch out. ... Wipe the surface with a microfiber cloth. ... Apply the polishing compound. ... Polish. ... Apply the rubbing compound. ... Remove residue. ... Repeat the first two steps. ... Apply polish.More items...•
How do you get scratches out of black plastic outside?
Combine equal parts water and baking soda to create a thick paste and apply with a cotton round or cloth, working in into the scratch with gentle, circular motions. Rinse periodically to check your progress, repeating until you've completely removed the scratch.
Can you buff scratches out of plastic?
Apply a mild abrasive, such as toothpaste, furniture polish, baking soda or plastic polish to the scratch. Try our VuPlex Plastic Cleaning Kit which will also give your surface a gloss finish. Wipe a clean cloth over the paste you have added in a circular motion.
How much does it cost to repair scratched bumper?
Cash Cars Buyer reports the average costs to be between $325 and $425. Light scratches are typically quick fixes while deep scratches may result in severe paint chips that reveal the metal or plastic of the bumper. Cash Cars Buyer lists the range of scratch repairs as $50 to $600.
How do you get scratches out of glossy black plastic car exterior?
1:508:05How To Restore Gloss Black Plastics! - YouTubeYouTubeStart of suggested clipEnd of suggested clipHead you attach it on there and of course you're gonna need a polish the one i like the most is aMoreHead you attach it on there and of course you're gonna need a polish the one i like the most is a finishing polish. This is the sonax perfect finish.
Does toothpaste remove scratches from plastic?
Polishing plastic with toothpaste Using toothpaste is really effective to remove small surface scratches from soft plastics on small household items like frames or storage boxes. You'll want to use a non-gel paste and if you can find one with baking soda in it, that's an added bonus.
HOW DO YOU RESTORE A BLACK BUMPER?
How you restore a black bumper depends very much on the extent of the damage. Deep scratches and scuffs should be sanded down and carefully filled...
DOES WD 40 REMOVE SCRATCHES?
You’ll be pleased to hear that WD40 can be used to treat bumper scratches, especially the lighter ones that aren’t too deep. When you spray WD40 ov...
CAN TOOTHPASTE REMOVE SCRATCHES FROM PLASTIC?
You’ll be pleased to hear that you can use toothpaste to remove minor and shallow scratches from most hard plastics. But it’s important to note tha...
CAN YOU POLISH PLASTIC BUMPERS?
You can polish plastic bumpers. And the good news is that it’s easier than you might think. It just requires buying the right product for the job....
HOW DO YOU RESTORE A GREY PLASTIC BUMPER?
To restore a faded grey bumper back to its original color, you will first need to remove any dirt and grease, make sure it’s dry, and then recolor...
How to remove scratches from bumper paint?
Step 1. Apply Masking Tape. Apply masking tape to adjacent panels and plastic trim that could be accidentally sprayed by bumper paint. Step 2. Sand Bumper. Wrap a sheet of coarse sandpaper around your scuff pad, and sand the bumper with firm pressure until you have smoothed the scratches out. Step 3. Clean Panel.
How long to sand a jar of paint?
Shake the jar of paint for about thirty seconds, then apply multiple coats of paint, about 10-12 inches away. If you encounter any bumps, cloudiness, or "cat" scratches, just wait five minutes, sand again until smooth, and try again.
How long does it take for a scratch to harden?
If you find any scratches that will not sand out, fill them with a thin layer of scratch-filling putty.#N#Give the putty five minutes for it to harden, then sand it using some coarse sandpaper.#N#You might need to repeat this step again in order to smooth everything out.
How to sand primer?
Sand the primer using fine-grit sandpaper with light pressure until it feels smooth. Apply multiple coats of paint from a distance of about 10-12 inches. If you encounter any bumps, cloudiness, or what looks like "cat" scratches wait five minutes, sand again, and re-apply paint.
How long does it take for paint to dry?
Give the paint five minutes to dry, then apply a light layer of clearcoat. Wait two minutes and slowly apply a heavier layer, overlapping each pass by around 50%. Give the clearcoat 10 minutes to dry before removing the tape and paper. Ask Question.
How to get scratches out of plastic bumper?
Sand the portion of the car bumper with scratches. Apply firm pressure until you are sure the scratches become smooth. After sanding wipe the plastic car bumper panel with a clean microfiber cloth. Apply wax and grease remover on the entire panel.
How long does it take for a black plastic bumper to dry?
Let it stand for about two minutes and spay a thicker layer. Make sure to overlap by around 50% for each pass. Allow the clear coat to dry for about ten minutes. Remove the masking tape, newspaper or butcher paper. Wash your car black plastic bumper. Apply some wax.
How to stop plastic bumpers from fading?
Avoid using abrasive cleaning products and scrubbing materials on the plastic bumper. Always use soft microfiber cloths to prevent scratches. Avoid using acidic cleaning agents too as these may leave scratches on the plastic bumper.
Why do my car bumpers look bigger?
They tend to look larger than how they actually are. More serious is the fact that they are prone to scratching and chipping. When another car touches the bumper while you are parking or when you accidentally hit the wall, scratches may appear on your plastic bumper.
Why is my black plastic bumper faded?
The UV rays of the sun can cause your car black plastic bumper to fade. While hitting other cars when parking or hitting walls can sometimes not be avoided, all you can do is to take some care when parking your car. Scratches from car black plastic bumper is an easy do-it yourself project.
How to get paint to stick to plastic bumper?
Allow the scratch-filling putty to harden for about 5 minutes. Sand the area with coarse sandpaper. Repeat the process until the scratch is smooth enough. Scuff the area within ten inches from the repaired scratch with a scuff pad. This will enable the paint to stick well to your car plastic bumper.
How long does it take for paint to dry on a drywall wall?
Spray multiple coats of the paint. If there appears to be any bumps or cloudiness, let the paint stand for about 5 minutes. Sand the area again and spray again some paint. Allow the paint to dry for about 5 minutes.
