- Open up your toilet seat and look for metal hinges that sit on vertical pegs. ...
- Lift the toilet seat straight up off the hinges from the upright position. Leave the soft-close seat in the fully open position.
- Set the toilet seat upside-down on a flat work surface. Flip your seat over so that the metal hinges are exposed.
- Pull out the cylindrical dampers on both sides of the back of the seat. Grab the dampers between your fingers.
- Rotate the dampers towards the back of the seat to make it close more slowly. ...
- Slide the hinge dampers back into the hinge assembly. Push the cylindrical damper back into the hole in the hinge assembly on one side.
- Put the toilet seat back on the toilet bowl. Align the holes in the seat’s hinges with the begs on the toilet bowl.
What is the best soft close toilet seat?
The 10 Best Soft Close Toilet Seats are:
- Bath Royale BR237-00
- Kohler K-4636-0 Cachet
- Bath Royale BR606-00
- Mayfair 1847SLOW 000 Kendall
- Brondell LumaWarm
- Delta Faucet Morgan 811903-WH
- Toto SS114#03 Transitional
- Kohler K-4734-0 Rutledge
- Mayfair 1830CHSL 000
- Hibbent Premium Toilet Seat. The Bath Royale MasterSuite is a high end toilet seat that we strongly recommend. ...
How often should I Clean my Toilet Seat?
Inside The Bowl – How Often Should You Clean Your Toilet
- Daily Maintenance: This is mostly done for messes that won’t flush. ...
- Weekly Maintenance: Weekly maintenance is a smart move to keep those rust and yellow colors from appearing in the bowl. ...
- Monthly Maintenance: Monthly maintenance requires one extra step – cleaning solution. Chances are, you’ll opt for bleach or another chemical.
How do I fix a broken toilet seat?
- WOLTU Heavy Duty Toilet Seat.
- Big John 6-W Oversized Toilet Seat with Cover.
- American Standard Heavy-Duty Elongated Commercial Toilet Seat.
- Bath Royale Premium Round Toilet Seat with Cover.
How to install a slow close toilet seat?
Installation Steps for Toilet Seat Slow Close. First of all, prepare the materials needed to replace the toilet seat. There is mainly one set of toilet cover with fittings, including one set of toilet seat, two screws, two square tenors and two sets of nuts.
Can a self closing toilet seat be fixed?
You can make adjustments to the bolts that hold the seat in place to fix a loose toilet seat. The only reason you would need to adjust soft-close hinges is if your soft-close seat is not closing at the right speed. Lift the toilet seat straight up off the hinges from the upright position.
Why has my soft-close toilet seat stopped working?
Soft-close toilet seats have hinge dampers that help control the speed at which your seat closes. If your slow-closing toilet seat is slamming shut, chances are these dampers need tightening.
How do you fix a concealed toilet seat?
2:013:10How to fix a toilet seat with hidden fixings - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can see there there's a little screw on the top. And we need to tighten up that screw. So we canMoreYou can see there there's a little screw on the top. And we need to tighten up that screw. So we can take a phillips head screwdriver. Tighten that one up nicely. Once we're done we can put our cap.
How do you fix a soft-close American Standard toilet seat?
STEP 1: Begin by lifting up the seat, and simultaneously press the buttons and pull up to remove it. STEP 2: Remove the hinge covers. STEP 3: Using a screwdriver, tighten the screws – be careful not to overtighten. STEP 4: Replace the hinge covers, and place the seat back onto the toilet hinges.
How do you adjust a soft close damper?
1:503:41Soft Close Damper Adjustable for Cabinet Doors LocksOnline Product ...YouTubeStart of suggested clipEnd of suggested clipSo as these spring in your in your hinge. Takes over and starts to get bring the door into slammingMoreSo as these spring in your in your hinge. Takes over and starts to get bring the door into slamming into position you would then adjust that so there's a little bit of momentum.
How do you fix a Kohler soft close toilet seat?
0:091:37Hinge and Damper Replacement - Quiet-Close Toilet Seats - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pull up on the bottom cover to remove. Next take your needle nose pliers. And pull each damperMoreAnd pull up on the bottom cover to remove. Next take your needle nose pliers. And pull each damper inward to release the hinge assembly from the toilet seat.
How do you tighten a screwless toilet seat?
0:471:35How to tighten a loose toilet seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo this seat is removed simply by pulling. Up. The caps and using a Phillips head screwdriver theMoreSo this seat is removed simply by pulling. Up. The caps and using a Phillips head screwdriver the longer. The longer the screwdriver the better it makes it easier to type you simply tighten.
How do soft close hinges work?
How Do Soft Close Hinges Work? Soft close hinges have a mechanical device built into the hinge that prevents a cabinet door from slamming. It slows down the door and shuts it 'soft'. These devices are also sometimes called self closing hinges.
How do I stop my toilet seat from sliding sideways?
How to Fix a Loose Toilet: Locate and install seat stabilizers. Then install a set of toilet seat stabilizers, such as Safe-T-Bumpers. Loop the rubber band around the toilet seat and center the stabilizers so they touch the inside rim of the bowl. Drill a starter hole and secure the stabilizers with screws from the kit ...
Why does my toilet seat keep moving?
If not appropriately threaded, the wing nut may strip or not hold tight, causing your toilet seat to move out of position. To thread properly, the tips of the wing nut must be centered and pressed up into the underside of the mounting hole. It's best to turn the screw, not the wing nut.
How to fix a toilet seat that is not working?
Step 1: Check your toilet seat. First you need to check your toilet seat thoroughly. Get a clear idea of the design of your toilet. Now point out the problems. If there is a problem with the hinges then you need to work on it. You need to take out the seat and the lid of the toilet to work with the hinges.
How to take out a toilet seat?
For this step you need to close the seat first. Then flip up the plastic covers of hinges. Slide the seat forward and remove it. Place the seat upside down on a flat surface. The hinges should be facing you.
Why does my toilet seat close in slow motion?
So you need to change the hinges to make your toilet seat close in slow motion. If your slow close toilet is too dirty or smelly just wash out the whole thing with soapy water in a gentle way. Stains on the seat and bowl can be removed by washing it properly.
What to do if your toilet seat breaks?
There is no way to fix a broken toilet seat. All you need to do is to buy a new slow close toilet according to the design of your toilet bowl and install it. Installing a new toilet seat is not so hard.
Why is it important to slow close the toilet seat?
A slow close toilet seat has several advantages. And the biggest one is the seat does not slam. It does not create noise when the seat hits the stool. If you are using your toilet in the middle of the night you have no need to worry about loud noise. It helps to close the toilet lid every time you use the toilet.
Is it safe to use a slow close toilet?
It helps to close the toilet lid every time you use the toilet. Because of the slow close feature, the seat hits the stool very softly. So there is no question of cracking the toilet seat. So you can use it for a long time. This slow close toilet is also very safe for your children.
What Is a Slow-Close Toilet Seat?
Slow-close toilet seats—as their name implies—close very slowly, but the cool thing is that they close on their own. Of course you will have to give the seat a little nudge, but once you do the tensioned hinges will take care of the rest.
Why Slow-Close Toilet Seats Are Purchased
It was briefly mentioned above, but more attention to this attractive quality should be given. With a slow-close toilet seat, you don’t have to worry about the lid slamming down after you get up from the toilet.
Related Questions
Installing a slow-close toilet seat is something you can do on your own. All you need is a screwdriver.
What is slow close toilet seat?
A slow close toilet seat is basically one that closes on its own as soon as you start to push it down. Gravity controls it but special, tensioned hinges control the gravity. This is where the slow part comes in so there’s no slamming down. To get the seat on its way to closing, even just a light tap will do the trick.
Why are toilet seats slow closing?
Keep Things Cleaner. Slow close toilet seats are more sanitary too. That’s because there is a little less touching and handling of the seat to get it closed. That means fewer just “dirtied” hands grabbing the lid; but what’s better is that many models come with removable toilet seat hinges.
Why is my slow close seat not working?
Slow Close Seat Not Working. In most cases, a slow close seat that is coming down too fast just needs to be cleaned. This means from the inside out. Over time, particles from usage can become lodged in and around the moving parts of the hinge.
Can toilet cleaners stain paint?
This includes toilet bowl cleaners, disinfectant wipes, or brushes. These will all damage the paint over time, and the rest is history. Some medications have been known to cause staining after they’ve run through a person’s system and come into contact with the seat or lid with urine.
Can you slam down a toilet seat?
No More Slamming! The benefits of a slow close toilet seat are numerous. The biggest of course is that you’ll never have a seat slam down again with a soft close toilet seat. Kids or adults not paying attention can let go of the seat without the consequences of a loud noise when the seat hits the stool.
Can a self closing seat lid break?
As with anything mechanical that gets regular use, parts can wear out, become dirty or even break. There may be times when your fancy, self-closing seat and lid stops working or needs a “tune up”.
Can toilet seat hinges be loose?
Get a quality model, and you can use it for many many years. The toilet seat hinges themselves are built not to become loose, even after tightening down–a sure sign of a low-grade toilet seat; hinges that make the seat shift around.
How to get a toilet seat off?
Leave the soft-close seat in the fully open position. Hold the seat at the top and bottom or at both sides and carefully pull it straight up off the metal pegs. If your toilet seat doesn’t lift straight off, try tilting it forward just a few degrees and see if you can lift it off from that position.
How to remove a toilet seat from a toilet?
Slide the seat forward from the down position to remove it. Leave the seat all the way down so that it is resting in the closed position on the toilet bowl. Flip up the plastic hinge covers at the back of the seat, then grasp the seat from the back and pull it straight forward off the toilet.
Why adjust soft close hinges on toilet seat?
The only reason you would need to adjust soft-close hinges is if your soft-close seat is not closing at the right speed. ...
What type of hinges are used on a soft close toilet?
Metal peg-style hinges are 1 of the 2 main types of hinge assemblies that soft-close toilet seats may use. Look for metal pegs coming up from round plates attached to the back of the toilet bowl, which the hinges on the toilet seat slide onto.
How does a soft close toilet seat work?
Some soft-close toilet seat hinges can be adjusted to make the seat close more slowly.
Is a soft close toilet seat adjustable?
Not all soft-close toilet seat hinges are adjustable. If there are notches on the dampers that make it so you can only take them in and out in 1 position, they are not adjustable. If your hinges are adjustable, they may be hexagonal or have multiple notches that allow you to put them in at different positions.
Do all toilet seats have hinges?
However, not all soft-close toilet seats have adjustable hinges, but you’ll have to remove the seat and inspect the hinges to find out if yours are adjustable. If your soft-close seat isn’t working like it used to and you can’t adjust the hinges, you might have to fix it by replacing the hinge dampers with a new set.
How to remove a Kohler quiet close toilet seat?
On a Kohler Quiet-Close seat, start by removing the gray cover. Push upward on the two recessed areas on the side of the cover to lift it out. Next, use needle-nose pliers to grasp the "X" on the end of each cylinder and pull inward. This will allow the entire damper assembly to separate from the toilet seat.
Why do toilet seats have a soft close?
Soft-close toilet seats slowly lower when tilted forward. This prevents them from slamming down, which could damage the toilet seat and hinges or wake sleeping members of the family . Dampers control the soft-close action, and these may need to be adjusted or replaced if the lid suddenly starts slamming closed.
How to remove soft close damper on Kohler?
On some models, you might see a small hole on the dampers. Insert a screwdriver into this hole and rotate the damper toward you, then slide it outward to remove it. On a Kohler Quiet-Close seat, start by removing the gray cover.
What does damping grease do to a toilet?
Damping grease will absorb shock and increase resistance when the toilet lid shuts, slowing it down. Advertisement. The damping grease needs to be applied to the inner structure of the soft-close toilet seat dampers. Look for a retaining nut on one end of the damper and remove it with a socket wrench ...
