Teddy Bear Restoration
- De-stuff and Vacuum. First thing I did was get an Xacto knife and cut the rear seam in his back, then proceeded to de-stuff him.
- Wash and Dry. Next, I filled up my sink with cold water and soaked him in there. ...
- Sew and Repair. Now that he's all clean I started on his repairs. ...
- Re-stuff Head. Now it's time to re-stuff. I bought this "economical eco-friendly recycled polyester fiberfill" and ended up removing it all after I had re-stuffed fully.
- Re-stuff Arms and Legs. Next, I stuffed his arms and legs. ...
- Sew and Re-stuff Body. As you can see in the first picture, his back is now fully opened up, so, I needed to sew him up again to ...
- Stuff and Seal. Last step, sew up his back. ...
- Enjoy! Look at that difference! So clean, and it only took a few days to do, but it'll be enjoyed for many more years to come.
How to refurbish a teddy bear?
There are a number of crafters who professionally repair stuffed animals, from vintage teddy bears to precious plushies that met a grisly fate at the hand (or teeth) of the family dog. These seamstresses take orders from around the country — and around ...
How to fix your teddy bear?
- If your bear does not have a hole that needs to be repaired through which you can remove the stuffing, be sure to make a hole just big enough to ...
- Use a heavy duty thread. Our example bear was stitched with a thread suitable for sewing denim.
- When sewing with a needle and thread, use an overcasting stitch.
How to clean a teddy bear?
- If something gets spilled on your stuffed animal, do not use a cloth to wipe off the spill. ...
- Use a vacuum cleaner with a brush attachment to provide a gentle cleaning and to remove loose dust and dirt.
- Instead of using a vacuum cleaner, you could put your stuffed animal on the clothes line on a windy day to remove loose dust and dirt. ...
Do teddy bear hamsters shed at all?
Teddy bear hamsters are among the most popular Syrian hamsters that possess beautiful furs. They are also known as fancy hamsters, Angora hamsters and long-haired hamsters. Most female hamsters of this type have plush furs while the men are characterized by their long skirt of furs located at the back.
How do you fix a floppy teddy bear?
1:233:53How to make an old stuffed animal look new again - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing some carpet cleaner on a rag. I didn't want to get him really wet. So I just like went overMoreUsing some carpet cleaner on a rag. I didn't want to get him really wet. So I just like went over him you kind of use a baby wipe as well or if it's not dirty.
How do you fix a teddy bear without sewing?
3:535:20How to Fix a Torn Stuffed Animal - Easy No Sew DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you're gonna take a glue gun or it across that inside seam squeeze it together without burningMoreSo you're gonna take a glue gun or it across that inside seam squeeze it together without burning your fingers you might want to wear it cotton gloves for this hold it to the course.
How do you put a patch on a teddy bear?
0:402:49Patching an Old Teddy - YouTubeYouTubeStart of suggested clipEnd of suggested clipI've got big old darning needle here that would work just as well and just like any kind of felt inMoreI've got big old darning needle here that would work just as well and just like any kind of felt in project you're just gonna stab it. In just stab it into the home. And it will start to.
How do you fix a teddy bear head?
Cut a long piece of thread. The thread should match the stuffed animal's fur color.Thread the needle. Tie a knot in the end of the thread.Put the stuffed animal head on the body; make sure it is facing the correct direction. ... Sew around the entire neck, running the needle through the neck and head.
How do you fix a ripped plush?
0:392:57How to stitch a plush toy for your kid | hand sew a stuffed animal repair DIYYouTubeStart of suggested clipEnd of suggested clipTwisting it off take the needle and start at one. And the opening pull the thread all the wayMoreTwisting it off take the needle and start at one. And the opening pull the thread all the way through and make sure that the knot is not going through go directly across to the other side.
Can I hot glue a stuffed animal?
I used hot glue but you can use whatever. Attach fabric and stuffed animal of your choice. I used hot glue but you can use whatever.
How do you darn a teddy bear?
30:2758:28HOW TO FIX AND REPAIR ANTIQUE AND VINTAGE TEDDY BEARS 101YouTubeStart of suggested clipEnd of suggested clipThis is called a blind stitch or a ladder stitch. And i pull it tight. Then i go in this side. And iMoreThis is called a blind stitch or a ladder stitch. And i pull it tight. Then i go in this side. And i make this stitch there like a ladder.
How do you fix a stuffed animal seam?
2:496:37How to Repair a Damaged Seam - Shirt - Plush Toy - Pants - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you don't have access to the inside of the seam because it has a lining or is like a stuffedMoreIf you don't have access to the inside of the seam because it has a lining or is like a stuffed animal you can do a slip stitch on the right.
How do you sew a bear back together?
0:445:29Ladder Stitch How to | Memory Bear Sewing | Whitney Sews - YouTubeYouTubeStart of suggested clipEnd of suggested clipKnot. Bring the needle up from the inside of your project a few stitches away from where yourMoreKnot. Bring the needle up from the inside of your project a few stitches away from where your opening. Begins. Then take a small stitch in one side parallel with the opening.
How do you fix a soft toy?
0:025:30Fixing Stuffed Toys - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf the holes are big enough we're going to be able to restock them and give them some more life ifMoreIf the holes are big enough we're going to be able to restock them and give them some more life if we want or just repair them in this case the seam has come undone. So we need to put his leg.
How do you sew a stuffed animals head back on?
0:318:18Sewing Tutorial: Attaching Your Plushie's Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipI start by going through the front of the neck right in the center. And I just go up from the insideMoreI start by going through the front of the neck right in the center. And I just go up from the inside to the outside through the front of the neck.
How do you make a plush toy without sewing?
0:002:47HOMEMADE BUBBLE TEA PLUSH NO SEW! - YouTubeYouTubeStart of suggested clipEnd of suggested clipDirection to make a cup like shape. Once your glue has dried you'll then be able to turn your shapeMoreDirection to make a cup like shape. Once your glue has dried you'll then be able to turn your shape inside out once turned inside out you may notice that the top and the bottom might not be straight.
How do you fix a soft toy?
3:415:01How to repair your favorite stuffed animal - YouTubeYouTubeStart of suggested clipEnd of suggested clipThrough one side of the fabric. To the other side make a stitch. Pull it through make a stitch pullMoreThrough one side of the fabric. To the other side make a stitch. Pull it through make a stitch pull it through make a stitch. And then that'll close up the hole in a way that's invisible.
How do you make a no sew bear?
0:224:27No Sew Sock Bear - Project of the Month - February - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake a large cotton ball and split it in two. Then take your first sock and position the first halfMoreTake a large cotton ball and split it in two. Then take your first sock and position the first half of the ball on one side right where the Simas grab.
How do you put a leg back on a stuffed animal?
1:205:30Fixing Stuffed Toys - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd down most likely there'll be a where line that we're going to be able to stitch. With. So theMoreAnd down most likely there'll be a where line that we're going to be able to stitch. With. So the needle is gonna come up. And then down go back up. And back down you can also weave.
How to thread a stuffed animal?
Thread a needle with thread matching the fabric of the stuffed animal by pushing the thread through the small hole (eye) of the needle. Choose the length of your thread based on the length of the incision . Approx. 2-3 feet of thread will work well for a 3 inch incision. You may need a magnifying glass as the eye of the needle is really small ...
How to make a stuffed animal incision?
Using a pair of scissors, make an incision approximately 3 inches in length along the middle major seam on the back of the stuffed animal (a seam ripper may also be used to open an existing seam).
Can you use scissors on stuffed animals?
However, these skills can be used on any stuffed object. Be aware when using scissors and a sharp needle; take any precautions to avoid misuse or injury. Prior sewing and knot tying knowledge is necessary. Adequate lighting is recommended.
Step 1: De-stuff and Vacuum
First thing I did was get an Xacto knife and cut the rear seam in his back, then proceeded to de-stuff him.
Step 2: Wash and Dry
Next, I filled up my sink with cold water and soaked him in there. I used gentle fabric soap and soaked him for about an hour. I then slowly laundered him with my hands to make sure he'd get a good scrubbing. Check out the color of the water. Gross! That's about 35 years worth of grime coming out.
Step 3: Sew and Repair
Now that he's all clean I started on his repairs. I turned his arms inside-out and then took a needle and thread that kind of matched the original. Make sure to use a needle that's large enough to push through the fabric, then sew. I don't know anything about sewing so I just looped the thread around. Seemed to work perfectly.
Step 4: Re-stuff Head
Now it's time to re-stuff. I bought this "economical eco-friendly recycled polyester fiberfill" and ended up removing it all after I had re-stuffed fully. DO NOT USE THAT. He ended up feeling like a cheap carnival animal and wasn't super soft and squishy like he originally was.
Step 5: Re-stuff Arms and Legs
Next, I stuffed his arms and legs. I made sure not to stuff his body yet, as I still needed to sew up his back a little more.
Step 6: Sew and Re-stuff Body
As you can see in the first picture, his back is now fully opened up, so, I needed to sew him up again to where my hand would fit in just enough to stuff more stuffing into him. That way, you'll have enough room for stuffing and the final seam won't be so big or noticeable. Now, start stuffing!
Step 7: Stuff and Seal
Last step, sew up his back. I didn't care so much if you could see the thread or seam too much, but because of his fur, the stitching seemed to get lost anyway. Perfect! Now he sits up nicely and looks nice and fat.
Step 1: Making the Plan
First step is to take a good look as to what state the teddy bear is in. Mine was missing nearly all the fur on all the gold areas, but the brown fur was generally only missing at the seams. The bear also had a large hole in the crotch where styrofoam pellets were slowly falling out.
Step 2: Pick Out Materials
I chose to go with the original color scheme for the repair, so I collected a number of gold interior design fabrics. (There is no reason that you can choose completely different colors.) I started with a neutral sewing thread, but later brought in heavier cream and brown nylon string for the embroidery.
Step 3: Layout and Attach the Patches
I attached the patches with small stitches similar to boro stitching where there is a running set of small stitches. Most of these I made in parallel lines, but alternative patterns can be used to add interest. For example, I chose to create circles for the circle patches on the ends of the legs and arms.
Step 4: Restuffing the Teddy Bear
I fortunately had a bag of recycled polypropylene pellets to use as stuffing.
Step 5: Embroider the Edges of the Fabric
Most of the interior design fabrics will be woven fabrics and the edges will fray if not protected. I chose to add interest by covering the edges with embroidery. Since the teddy bear has a number of curves and shapes, it is helpful to have a curved needle.
Step 6: Other Ways to Use Embroidery Stitches
Embroidery stitches can also be used to create structure and shape in the fabrics. I shortened the length of the stitches on the inside of the ear to cup the ear and make it stand up on it's own.
Step 8: Embroider the Brown Seams
Most of the seams on the brown fur areas were still strong and just needed to be decorated. Here I just wrapped a stitch around the seam.
Introduction
Does your favorite stuffed animal have a tear in it? Use this guide to return your furry friend to mint condition.
Step 2
Push the thread through the hole of the needle. Make sure to pull the thread all the way through.
Step 6
Begin stitching up the tear. Bring the needle from the starting side over to the other side of the tear.
