How to fix a Wobbly Ceiling Fan?
- Turn the fan off
- Step on to the ladder placed near the fan while some other on a separate step ladder to hold the fan
- Try to remove the screws from the canopy carefully.
- Tighten all the screws at the electrical box. These screws help to keep the fan attached to the box and tightening them will stop the wobbling
- Back on the screws to the canopy
- Then turn the power on and check for the wobbling.
How to fix a ceiling fan that wobbles very bad?
How to balance a wobbly ceiling fan?
- Cleaning the ceiling fan. After a long period of time dust may settle on a ceiling fan that can block the fan’s motor and in turn, it keeps much ...
- Check the structure of ceiling fan. The very initial thing to test out the whole support of a ceiling fan. ...
- Examine Ceiling Fan Blades. ...
- Fan Balancing Kit. ...
- Replace the ceiling fan. ...
How to fix an out of balance ceiling fan?
- Turn off your ceiling fan.
- Position a ladder under the ceiling fan positioned off-center and climb to reach the first blade.
- Use a duster for brushing dust from both sides of the fan blades.
- Dampen a microfiber cloth using warm water to clean the motor housing and wipe the blades.
- Clean the blades and blade holder housing and then dry all the surfaces.
How to balance a wobbly or noisy ceiling fan?
- The ceiling fan balancing clip will balance the fan blades, eliminating the wobble.
- Slide the balancing clip on the trailing edge of any blade, halfway between the holder and tip.
- Run the fan to check the wobble.
How to stop a ceiling fan from wobbling?
To fix a wobbly ceiling fan, make sure it’s mounted on a fan-rated electrical box. Check the box. A properly mounted fan will be attached to a fan-rated box, mounted either on a 2×4 with lag screws or to an adjustable fan brace. Install a fan brace.
Why does my ceiling fan wobble?
Wobbling can stem from a variety of causes, including blades warping, loose screws, and faulty installation . While Hunter fans are built to be wobble-free, incorrect installation can cause an issue with imbalance or wobbling. Whether you have a Hunter fan or one from another brand, you can use our troubleshooting tips to help fix a wobbling ceiling fan.
How to get a fan to not wobble?
Move clip to the edge of blade that caused the least wobble. Run your fan and observe the wobble. Adjust the clip in small increments along the edge of the blade until least wobble is achieved.
How to check if fan blades are warped?
Check for warping by standing on a secure ladder and looking down the edge of the blade toward the motor. If there’s any curvature, the blade is considered warped. Repeat this step for each blade. If they do not appear uneven, double check the screws that attach the blades to make sure they're tightened and secure. Warped blades cannot be balanced. Depending on your fan, replacement blades may be available.
How to contact Hunter fan support?
If you have a Hunter fan and the above steps have not worked, please contact our support team at 1-888-830-1326 (the US or Canada) and explain the troubleshooting steps you have completed. Be sure to have your fan model number, which can be found in your Hunter manual, and your receipt handy when you call.
How to tighten a fan canopy cover?
Remove the canopy cover to examine the mounting bracket and make sure the fan is mounted properly. If the bracket is loose, use a screwdriver to tighten it.
How to even out blade weight distribution?
Use a balance kit to even out the blade weight distribution. All Hunter fans ship with a balance kit and directions on how to use it. If you don’t have a Hunter fan, you may need to purchase a separate balance kit, which can be found at any home improvement store.
Ball socket not correctly fitted
A ceiling fan will almost always wobble if the ball socket groove isn’t seated correctly and firmly into the notch of the hanging bracket. In most cases, you’ll find that the fan is wobbling at whatever speed the fan is running.
Support bracket issues
Many ceiling fans have incorrectly been installed on electrical boxes which are designed for light fixtures. Thus, the fan is not attached to a box designed to carry the additional load. A ceiling fan has to be installed with an electrical box designed for carrying extra weight.
Unbalanced and broken blades
If the blades are off-balance the fan will wobble. A blade can cause an imbalance if it is broken. A broken blade can cause the center weight of the fan to shift. Interesting, a broken blade isn’t always easy to recognize. You’ll have to inspect the blades when the fan is switched off.
Step 1: Cut the electricity to the fan
Cut the electricity to the fan. Don’t just put it off at the wall switch, but put the applicable circuit breaker off. If you don’t know which circuit breaker is the correct breaker, put on the fan and put the circuit breakers off one by one.
Step 2: Get a ladder
Get a ladder enabling you to reach the ceiling easily and put your toolbox nearby. Remember a ceiling fan can be heavy and you have to stand on a steady surface or ladder to work on it or take it down.
Step 4: Check the electrical box
Check the electrical box to see if it has a label with the words “fan-rated box.” If you see the words, you know the correct box has been used. If the box is not marked as fan-rated, it is an electrical box for a light fixture which is normally not suitable to take the extra weight of the fan.
Step 5: Tighten the support bracket
If you’ve determined that the right electrical box is in place, you have to test whether you can wiggle it. Gently, shake the support bracket. If it wiggles, tightens it with a screwdriver. Tighten it until there is no wiggle possible.
How to fix wobbly fan?
Tighten the downrod support screws. Verify your blades are all the same distance from the ceiling to the blade. If you suspect any are lower, tighten those screws mounting the blades to the motor . We hope this video helped you fix your wobbly fan.
What to do if your ceiling fan is wobbling?
If wobbling persists, you may need a blade balancing kit to stabilize the ceiling fan. Learn how to balance a ceiling fan using a ceiling fan balancing kit.
Why Buy from Del Mar Fans and Lighting?
There are many reasons to buy from Del Mar Fans and Lighting, however, here are just a few reasons we would like to bring attention to!
How to stop fan from wobbling?
Measure the distance from the tip of each blade to the ce iling. All blades should have the same vertical distance from the ceiling. Adjust any bent blade holders until all blades are at an equal distance from the ceiling. Step 6. Turn on the ceiling fan and confirm wobbling has stopped.
What is a blade balancing kit?
Now you're ready to get started with your balancing kit to restore the fan's stability. A blade balancing kit consists of a plastic clip and three balancing weights. Most new fans include a balancing kit; however, a ceiling fan balancing kit may be purchased for a low price.
How to put sticky weight on fan?
Now find the exact location of where to place the sticky weight by moving the clip up or down the blade based on how balanced it is when you turn it back on high speed. Press a balancing weight on the blade center line directly in line with the clip. Press the weight firmly to ensure it attaches . Then remove the plastic clip. Turn your fan back on to the highest speed and confirm that it's balanced.
Why does my fan shake?
Dirt and dust on your fan can cause it to shake, or even worse, damage it. So we'll wait. Okay now that that's been taken care of, grab a Philips head screwdriver, check and tighten all the screws on your fan. Loosen your canopy and slide it down so you can tighten your mounting screws.
