To repair your inflatable:
- Clean and dry the damaged area
- Apply one to two drops of repair adhesive to the hole
- Allow the adhesive to dry for 24 hours For large holes, be sure to use a vinyl patch. To complete this type of repair, you’ll need to:
- Cut one of the vinyl patches to a size that covers the hole and beyond it by about 1/2 of an inch
- Form the patch into a round or oval shape without corners
- Smear a thin layer of repair adhesive across the surface of the patch as well as along the area that requires repair
- Before positioning the patch on the inflatable, permit the adhesive to dry for two to four minutes until it’s tacky to the touch
- Place the patch over the damaged section of the inflatable
- Beginning at the center of the patch, press down and slide your fingers out to the edges to create a seal
- Set a heavy object like a diving weight or a landscaping stone over the patched section to ensure that it dries flat
- Allow the adhesive to dry for an additional 24 hours (minimum)
How to fix an inflatable blower that won’t blow?
Check the fuse on your plug. Replacement fuses are very cheap, so if your inflatable has a blown fuse, it’s an easy fix to swap a new one in. If those steps fail, sad to say you need to look into replacing your inflatable blower. Here are the best ways to go about it.
How do I repair my inflatable inflatable?
This method of repair will be the least visible to onlookers, but if you bunch the fabric too much it could create a strange divot in your inflatable. For holes and tears in highly visible areas, we recommend Fabric Repair Tape. This stuff is a bit thinner and less noticeable than the clear duct tape, but still extremely strong and durable.
How do you fix an inflatable balloon that keeps popping?
Get a spray bottle and some soapy water, and start spritzing it all over your inflatable. An area with air leaking out of it will start blowing large bubbles and make itself known! Be sure to go over the entire inflatable when you do this method, carefully marking each leak either mentally or with a piece of masking tape.
What kind of material should I Fix my Yard inflatables with?
Now it’s time to determine what kind of material you will be fixing. Most yard inflatables are made of a fabric/nylon material that can be repaired in a variety of ways. I’ll go over a few here – For major tears, we recommend Transparent Duct Tape. It’s not the sexiest solution, but it’s extremely effective for repairs.
How do you fix a ripped inflatable?
To begin your quick inflatable repair, deflate your item completely. Then, clean the small hole or tear with isopropyl alcohol. Step 2: Patch the leak. Patching a small leak or tear on your inflatable is simple with a quick-curing UV repair adhesive that bonds directly to the material.
How do you fix an inflatable air blower?
0:163:48Easy Fix For a Broken Airblown Inflatable - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis pull it out from Olaf. And do the same with the other inflatable. Pull it out tight littleMoreThis pull it out from Olaf. And do the same with the other inflatable. Pull it out tight little tight now we're one and make sure the flat one goes with the flat.
Why do inflatables stop working?
Inflatable Blower Stopped Working Check all opening to the fan for any debris that could be causing this issue. Check the fuse on your plug. Replacement fuses are very cheap, so if your inflatable has a blown fuse, it's an easy fix to swap a new one in.
How do you fix an inflatable plug?
2:495:05Fix a bad AC Plug on Christmas / Halloween Inflatable by ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo they don't touch it all one side goes to here. Once I goes to here you're gonna want to useMoreSo they don't touch it all one side goes to here. Once I goes to here you're gonna want to use crimps.
Can you repair inflatables?
Things You'll Need Stitching or special repair patches fix damaged inflatables. The downside to inflatables is that they are prone to leaks, punctures or tears that render them unusable. Rather than discarding your favorite holiday inflatables, many of them can be patched with tape or a vinyl repair kit.
Can you replace the fan in an inflatable?
0:000:51Yard Inflatables Inc - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere's a fan replacement of the yard inflatables air character fan you clip off the zip tie. YouMoreHere's a fan replacement of the yard inflatables air character fan you clip off the zip tie. You pull the zip tie out it'll come out through the little tube that's sewn on to the inflatable.
Are there fuses in inflatables?
2:218:41How To Change A Fuse In Your Airblown Inflatable DecorationYouTubeStart of suggested clipEnd of suggested clipNow each brand new inflatable comes with an extra fuse this one happens to have an extra fuse.MoreNow each brand new inflatable comes with an extra fuse this one happens to have an extra fuse.
How long do outdoor inflatables last?
Most manufacturers recommend that you do not keep your inflatable plugged in for more than 8 hours at one stretch.
How do you repair inflatable decorations?
0:103:00How to Repair Inflatable Santa Claus Christmas Holiday DecorationYouTubeStart of suggested clipEnd of suggested clipSo I found these vinyl patch repair kits at Home Depot ended up buying three of them. The piece ofMoreSo I found these vinyl patch repair kits at Home Depot ended up buying three of them. The piece of plastic measures. Two feet long by six inches tall. And you get that you get the adhesive.
How do you tether an inflatable Airblown?
5:1811:34How To Video: Securing Your Airblown Inflatable DecorationsYouTubeStart of suggested clipEnd of suggested clipSo you know you basically have to tie you know the string into the hole in the back which you canMoreSo you know you basically have to tie you know the string into the hole in the back which you can kind of see what I did here with this one at least is. That's what I do so.
Why is my yard inflatable not inflating?
Consider Placement. An inflatable that fails to inflate could be sitting in the wrong spot. Make sure the inflatable is completely unfolded and lying flat on a level surface. Check that the fan used for inflation is sitting on a level, stable surface.
How do you fix a hole in a Christmas inflatable?
Some inflatables come with patch kits so you can mend small tears. If yours doesn't have one, try repairing it with duct tape or clear, heavy duty packaging tape. If you can apply the tape from inside the inflatable, it will be less noticeable.
How to repair inflatables with adhesive?
If you’re repairing inflatables with the kit’s patches, add a little more adhesive to the edges of the patch after the drying process is complete to increase the strength of the seal. Also, confirm that the adhesive is completely dry and that the repair was successful before launching the inflatable back into the water.
How to find a leak in an inflatable?
How to Find the Leak. Before diving into the task of locating a leak on the surface of your inflatable, check the valve. These leaks are often caused by grit or sand that jams the device and prevents the one-way speed safety valve flap from closing properly. Use an air pump to blow out any foreign fragments from the valve.
How to find a leak in a water balloon?
If you don’t have soap with you, then you can locate the leak by removing the tube from the protective section of the inflatable. Deflate the tube until it’s about 3/4 full of air. Take the partially inflated tube and slowly submerge it under the water. Submerge the tube section by section. With patience, you’ll spot a line of bubbles signaling the leak. Once you’ve determined the source of a leak, circle it with a permanent marker. Check the entire surface of the tube for additional leaks since the inflatable may have more than one.
How long is the warranty on Kwik Tek water tubes?
All Kwik Tek towable tubes carry a 1 year warranty, but if your product falls outside the warranty period, this handy guide will help you get some extra life out of your investment by providing ...
How to remove a towable tube?
Remove the tube section of the towable from its protective cover, and add air to it until the tube is taut. The next step is to dip a sponge or cloth into the dish soap mixture. Then, apply it to the tube section. If there is a hole in the tube, bubbles will begin to form around the spot.
Why are inflatable water tubes made of durable materials?
Built to Last. Inflatable water and snow tubes are made from durable materials, but because the covering is malleable, it is susceptible to punctures and abrasions. Proper care is the best way to prevent repairs.
How to get rid of bubbles on a boat?
You’ll need it to locate leaks in towable inflatables. In the bucket, combine a squirt or two of soap with water until you have a mixture that your kids could use to blow bubbles.
How to connect an airblown 4ft inflatable?
ADAPTORS: For 4FT inflatables, unplug your Airblown to check the adapter connection. There is a small groove on the adapter plug that matches a raised notch on the inside of the adapter port. Make sure the adapter is connected so that the notch slides securely into the groove. Plug the Airblown back into the wall outlet or heavy-duty outdoor extension cord.
When does an airblown inflatable start inflating?
A: Under normal conditions, an Airblown Inflatable should begin inflating automatically as soon as it’s plugged in. If it has animation or motion, these actions should also begin upon plug in. If not, please check the following:
What temperature do airblown inflatables operate at?
FREEZING TEMPERATURES: Airblown Inflatables will operate at temperatures below freezing. However, we do not recommend operating the item if temperatures drop below 14° Fahrenheit (-10° Celsius).
How long is Airblown warranty?
A: If your Airblown is still under the 90-day warranty and parts are available at our corporate office, we typically send parts at no additional charge. Please open a customer service account for assistance.
How to dry airblown?
HEAVY RAINFALL/MELTING SNOW: If your Airblown has become soaked with water from a heavy rainfall or melted snow and you are having trouble inflating it, move the unit to a dry location and plug it in. The fan will dry the unit. If there is a large amount of water, open the zipper closest to the soaked area and drain the water.
Where can I buy airblown bulbs?
You may also be able to purchase light bulbs through online retailers, like buylighting.com.
Do airblown globes have zippers?
Check for hidden zippers in the seams. If you have a globe, there can also be zippers on interior characters inside of the globe. Please double-check to make sure all are completely zipped.
Can you use Gorilla Glue on inflatables?
Gorilla tape is strong and water-resistant, making it perfect for virtually invisible repairs.
How do I keep my inflatables from falling over?
You can keep your inflatables in place with bags filled with sand or gravel. Please make sure you use two or three, and when filling them up, don’t overdo it as these will need to fit through the hole where they go on top! Once everything is well-secured, tie off tight so that nothing spills out while placing into the base.
Will PVC glue work on inflatables?
Both PVC and Hypalon materials are slippery, making them difficult to glue.
How to get air out of inflatable?
You may be able to audibly hear the hissing as well. If you’re really in a jam, you can use a classic mechanic’s trick. Get a spray bottle and some soapy water, and start spritzing it all over your inflatable. An area with air leaking out of it will start blowing large bubbles and make itself known!
What to use for small tears in inflatables?
For small tears, a simple sewing kit will do the job if you know how to use it. This method of repair will be the least visible to onlookers, but if you bunch the fabric too much it could create a strange divot in your inflatable. For holes and tears in highly visible areas, we recommend Fabric Repair Tape.
What to do if your blower is not working?
If you still don’t get any action from your blower, try a different outlet if possible or at least plug another device into the same outlet to make sure the outlet is live. If your blower is working, but the inflatable isn’t inflating all the way, you likely have a tear in your fabric.
Can an inflatable blower have LED lights?
Your existing inflatable blower may have an LED plug attachment in it if it has internal LED lighting. If that’s the case, you may be able to find a blower that’s compatible with your existing lights.
Can you use duct tape on inflatables?
For major tears, we recommend Transparent Duct Tape. It’s not the sexiest solution, but it’s extremely effective for repairs. This duct tape is weather-resistant and should last the life of your inflatable. Try to place it on the inside of the inflatable to protect it from the elements as much as possible. The only downside this method has is the duct tape may be visible if there’s a light shining behind it.
Can you replace an inflatable blower fuse?
Replacement fuses are very cheap, so if your inflatable has a blown fuse, it’s an easy fix to swap a new one in. If those steps fail, sad to say you need to look into replacing your inflatable blower. Here are the best ways to go about it.
Can you put inflatables outside?
When it comes to your best yard inflatables, placing them outside inevitably puts them in harms way for potential damage. It could be anything from wild animals to a bad snow storm that could cause your inflatable to break, leaving you with an expensive pile of fabric on your lawn and not much else.
Inflation & Assembly
- A: Under normal conditions, an Airblown Inflatable should begin inflating automatically as soon as it’s plugged in. If it has animation or motion, these actions should also begin upon plug in. If not, please check the following: 1. LEVEL SURFACE: Ensure the Airblown is on a level surface. 2. FAN(S) SETUP: Make sure all fans are level and plugged directly into a wall outlet or a heavy-dut…
Operation
- A: Please make sure the rotating cuff does not have fabric twisted around it, as this may cause tension and restrict the movement. If fabric is twisted around the cuff, please carefully untwist it. Make sure the Airblown is on a level surface and all other assembly instructions have been followed properly. A: Operation of your Airblown during normal and light weather conditions, suc…
Replacement Parts
- A: If your Airblown is still under the 90-day warranty and parts are available at our corporate office, we typically send parts at no additional charge. Please open a customer service account for assistance. For items no longer under the 90-day warranty, you may be able to purchase parts online through independent vendors like Yard Inflatablesthat maintain a parts inventory. A: If you…
Care & Maintenance
- A: Rips or holes in your Airblown can be sewn by hand (no special thread is required) or taped with clear packing tape. You can also use tent repair tape to patch your Airblown, which can be found at most sporting goods stores. A: Wipe your Airblown® with a damp cloth and allow it to dry before storing away. Use mild detergent if necessary.