How Do You Fix A Broken Invisible Fence Wire?
- Dig up the break location
- Strip the wire covering from both ends of the wire
- Clean and remove any dirt
- Twist the strayed ends into a wire shape
- Connect them using an underground fence splicing kit that will protect them from the elements and future breaks.
- Watch the video below to see this in action.
How to troubleshoot an invisible fence?
What to Do If an Invisible Fence Is Not Working
- Look For Simple Fixes First. If your dog goes past the boundary wire of your invisible fence, check the collar first. ...
- Replace the Batteries. Some invisible pet fences include a battery tester with the fence system. ...
- Troubleshoot the Transmitter. ...
- Inspect the Boundary Wire. ...
What to do if an invisible fence is not working?
How do you reset an invisible fence transmitter?
- Check that the replaceable fuse on the back of the device is not blown, and if it is replace it.
- Make sure your transmitter is the issue by performing the short loop test.
- Unplug your transmitter from the AC adapter and disconnect the fence and ground wires.
- Look for damaged electrical components.
How do you repair a break in invisible fencing?
How to Find a Break in an Invisible Fence Using a Wire Break Locator
- Turn off your underground wire transmitter.
- Connect the two clips on the Kolsol transmitter to the underground wire – Use one clip for each different in and out wires to the underground transmitter.
- Turn on the Kolsol transmitter.
- Turn on the Kolsol detector and adjust the volume. ...
- Walk the underground wire path.
Does invisible fencing really work?
While traditional fences work well on flat or gently sloping yards, invisible fencing works on almost any terrain. Invisible fences can span hilly spots, wooded areas and water. Also, electronic fences can cover acres of ground in any pattern to create large exercise areas for dogs.
Why isnt my Invisible Fence working?
If you hear the warning, but no light flashes, replace the battery. If you don't have a tester, replace the battery and carry the collar past the boundary. If the problem was a dead battery, the collar should work properly when you approach the hidden boundary wire.
How do you fix a broken electric fence wire?
0:219:19How Do I Repair and Fix a Break in Dog Fence Wire? - YouTubeYouTubeStart of suggested clipEnd of suggested clipBasically butterfly twist the wires together and twist. Them just a butterfly twist there. Now theMoreBasically butterfly twist the wires together and twist. Them just a butterfly twist there. Now the real secret. We run some of our wire across here. And we're just gonna hit it with that shovel.
How long does an Invisible Fence last?
How long does the Invisible Fence wire last? Invisible Fence boundary wire is a direct burial grade wire and has a life expectancy of 27 years left undisturbed in the ground.
How do you reset the transmitter on an Invisible Fence?
Plug in the transmitter. The system and transmitter should reset automatically upon being plugged back in. Wait for a few seconds and look for any abnormality in the lights.
How do you find a broken wire in an invisible fence?
4:437:52How to find a wire break in a underground dog or pet fence using ...YouTubeStart of suggested clipEnd of suggested clipYou will orient this so that when you go back and forth about above your wire you'll hear the staticMoreYou will orient this so that when you go back and forth about above your wire you'll hear the static. Kind of increase as you get close to the wire.
What would cause an electric fence to stop working?
A lot of poor-performing fence systems can be blamed on inadequate ground systems. Every system should have at least three ground rods to perform properly. More ground rods should be installed if your electric fence is installed in sandy, dry or rocky soil. Frozen soil will also hinder the operation of your fence.
How do I know if my Invisible Fence collar is working?
You can position the test light tool on the collar probe and look for the light to flash. The higher the correction level, the brighter the light will shine on the test light tool. If the collar beeps once you reach the boundary, or the test light illuminates, the battery and the collar work.
What does blinking green light mean on Invisible Fence?
When you first insert the battery into your receiver, the status light will flash green. This indicates that the receiver has started properly. In the event that the lights do not flash, check the battery to be sure that it has been inserted properly.
Why is my Invisible Fence collar not working?
Either that, or the collar fit is too loose. Check whether the collar is snug enough around the dog's neck for the collar shock to properly make contact with the dog's skin.
How do I reset my wireless dog fence?
How to reset petsafe wireless collar press and hold the button on the collar until a beep is heard and the light flashes green to turn the collar on. What collars work with petsafe wireless fence? Press and hold the power button for 10 seconds to reset the collar.
What does it mean when your Invisible Fence beeps?
If your Invisible Fence control panel is beeping with a lengthy pause between each beep, it's possible your backup battery unit needs to be replaced. Your fence will still work, but if your power goes out, the system will no longer be operational until power is restored.
Can electric fence wire be spliced together?
Splices are usually needed as you come to the end of one spool of electric poly wire, but you still need to extend the fence. They allow you to link the polywire from one spool to the next. Secondly, polywire sometimes breaks and the de-energized section of fencing needs to be quickly re-established.
How do you tie electric fence wires together?
3:345:25Tying Off and Straining an Electric Fence - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we'll run our chain out pull the wire up hand tight attach the under other end of a strainers.MoreSo we'll run our chain out pull the wire up hand tight attach the under other end of a strainers. And now we're right to start walking the feet up the chain. Now that's about as much tension.
How do you connect wire fence together?
0:085:37How to Join Field Fencing Wire - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe've got a new roll right here and it's joining out here in the middle. So what we've got to do isMoreWe've got a new roll right here and it's joining out here in the middle. So what we've got to do is put these two fences together so that when we pull them they will hold and not come apart.
Can you splice dog fence wire?
When splicing the dog fence wire, all you need to do is twist the two exposed ends together, insert them into the gel-filled capsule and close the splice lock. The cylinder of the underground wire splice contains a mixture of silicone and grease, which helps to secure the waterproof connection.
How do you repair a broken invisible fence?
It depends on what part of the fence is broken. If the wire is broken, it's actually fairly easy to fix the problem. First, bring your pets inside...
Can invisible fence wire be repaired?
Invisible fence wire can be repaired. This is routinely done by invisible fence installers and the process is actually fairly easy for anyone who h...
Can you splice invisible fence wire?
Yes, you can fix an invisible fence by splicing in an unbroken wire. In fact, there are many invisible fence companies that sell invisible fence wi...
Why is my invisible fence unit beeping?
The most common reason why an invisible fence transmitter unit will be beeping is that there is a break somewhere in the wire. While there are some...
How Do You Fix a Broken Invisible Fence Wire?
Once you find the break, remove the insulation and twist the copper wires together. Then use electrical tape to cover the ends and keep the wires f...
How Do I Find a Broken Invisible Fence Wire
If you cannot see an obvious cause like roots or a dug-up dog fence wire, you can use either the collar or a handheld radio to find the wire break....
What Gauge Wire is Used for Invisible Fence?
Many commercial dog fences use a 20 gauge dog fence wire. Professionally installed fences may use a 14 or 16 gauge since these can be sturdier. If...
How to check for a break in an invisible fence?
The RF choke has two leads that should be placed into the transmitter jacks. Then take the two fence wires you originally removed from those jacks and twist each one around the other ends of the RF choke leads. The fence wires should be attached to the leads close to where they join the coils. Tune a portable radio to the frequency your invisible fence uses. You will know you have the right frequency when you hear fast tapping or beeping through the radio. Walk the perimeter of the invisible fence and look for drops in the signal. These indicate breaks in the wiring.
Why do people use invisible fences?
Invisible fences help keep your family pets where you can see them. Most people choose an invisible fence when they want to keep their pets in a confined area, but don't need the privacy or security that comes with traditional fencing. An invisible fence is less expensive than traditional fences because you don't have to buy materials ...
How to get a dog out of a transmitter collar?
Step 1. Check the pet collar first. Your pet may be getting out because the transmitter collar batteries are dead. Check the fit of the pet collar; some pets can remove their collars with a little pulling or chewing. If the pet collar isn't tight enough, your pet may not be registering the electrical shock.
Why is invisible fencing so expensive?
An invisible fence is less expensive than traditional fences because you don't have to buy materials or hire someone to build the fence. However, if your invisible fence stops working, you may have to call the company to troubleshoot; that can be expensive. Try troubleshooting problems with your invisible fence yourself.
Do invisible fence wires have to be special?
The wire doesn't have to be any special type, but will work best if it's near the gauge of the wiring used in the invisible fence. The idea is to mimic the invisible fence's circuit to make sure the error indicator is registering a fence break.
Invisible Fence Beeping
A common problem with the dog fence is a lack of battery power. When a battery is weak it will often cause beeping on the collar’s receiver and problems passing through certain areas of the house. The only way to fix this issue is by changing out the batteries in both your unit and your transmitter.
Invisible Fence Collar Not Working
There are a few things that could be going on. To troubleshoot, try these steps: -Unplug the unit for a couple of minutes, then plug it back in and check to see if it now works. -Inspect this unit for any damage to the power cord or detachable ground wire, as well as tarnish buildup from electrical discharge on any exposed metal parts of the unit.
How to Reset Invisible Fence
A high-frequency tone may be required for some Invisible Fence systems, particularly newer models. The correct sequence to reset the invisible fence is as follows. Insert another key into your dog’s collar transmitter and depress the on/off button for 10 seconds.
Other Invisible Fence Problems
I did some research on this subject and for an adjustment between 10-20 feet, it takes 2 adjustments to get the correct dog sensing area lined up with the correction zone of the fence. Adjustments should be made about one month apart. The signal field adjustment is super easy, just follow these instructions.
Why does a wire break when digging?
The wire gets cut accidentally from digging. The splice locations break due to poor slicing equipment or vehicle traffic above it pulling them apart. Vehicles or lawnmowers run over the buried invisible fence and break the wire, especially at splice locations.
How to test a live boundary wire?
Approach the live boundary wire with the receiver collar. Test it at multiple parts along the wire. It should beep at the same distance along the wire. Set the transmitter to full power. Test the receiver collar again. It should beep at the same distance along the wire. However, this time the distance should be greater.
How to test a receiver collar?
Turn on the receiver collar and the transmitter. For all tests use the same correction level on the receiver collar. Set the collar to beep or vibrate. Set the transmitter to half power. You’ll test two different settings on the transmitter. Again, keep the collar correction level the same. For the tests, you may want to add ...
What is the problem with underground wire?
Your problem lies with the underground wire. There’s likely a wire break in the boundary wire. Often this occurs at the splices. You’ll need to use a specialized tool to find the wire break in your boundary wire and check the splices.
Why is my collar not turning on?
If the collar appears to turn on but not all the lights are working on the transmitter or its alarm is on you have a transmitter problem. Contact your manufacturer to fix it.
