
[Solution] How to Fix a Broken Xbox One Controller
- Don't trash them just yet!. Jammed buttons and joysticks that, well, stick are common problems when it comes to Xbox One...
- Gather your supplies. The supplies you'll need to get your controller in fighting condition again are a flat-head...
- Detach the grip panels. First, remove the battery pack. Then, using the flat-head screwdriver, pry off the plastic...
- Take out the screws. From here, everything is like a Lego set. All the pieces pop apart once you remove the screws.
How do you clean a Xbox One controller?
- You can easily clean your Xbox One controller using a dry microfiber cloth.
- You can also carefully use compressed air to remove dust build-up in the controller's ports.
- Routine cleaning of your controller will help to keep it free of dust, fingerprints, and smudges.
- Visit Business Insider's homepage for more stories.
How do you turn off the Xbox controller?
- Touch the Xbox button on the front of your Xbox One console.
- Press and hold down the Xbox button on your wireless controller until the Off menu is displayed. ...
- Press the Menu button on your controller, select Settings, select Power and Start, and then turn off the console.
- Say Xbox, turn off, and then select Yes.
How to fix Xbox 360 controller not turning on?
- Press and hold the Guide button to turn the controller on.
- Press and release the "connect" button on the front of your Xbox console. It is a small button underneath the "Open Disc Tray" button.
- Within 20 seconds, press the "Connect" button on your controller. ...
- When the lights on your console stop blinking your controller should be attached.
Why is my Xbox controller flashing and not connected?
What to do when your Xbox One controller is flashing?
- Software issues when your Xbox One controller flashes. When your Xbox One controller is flashing, it is possible that software or microprocessor bugs be the cause.
- Hardware issues when your Xbox One controller flashes. When batteries are weak or faulty, the controller has trouble connecting because the signal is weak.
- Call on professional service. ...

Can you repair Xbox One controllers?
The supplies you'll need to get your controller in fighting condition again are a flat-head screwdriver, T8H screwdriver, T6 screwdriver and an Xbox One conductive button pad repair kit. You can purchase all of these items for just a few dollars each online. You'll also need a few damp cotton swabs.
How do I fix my broken Xbox One controller?
Many controller issues can be resolved by putting the controller through a complete power cycle. To power cycle your controller: Press and hold the Xbox button for 5-10 seconds, until the controller turns off. Wait a few seconds, then press and hold the Xbox button again to turn the controller back on.
Why do Xbox controllers break so easily?
These pin headers are connected to the PCBs with surface soldered pins. On both controllers, one side of these pin headers has broken its solder joints and completely disconnected from the PCB. This is a TERRIBLE design....
How do I fix my controller?
2:1525:1912 Ways to Resolve Analog Stick Problems (PS4 DualShock 4 ...YouTubeStart of suggested clipEnd of suggested clipFirst clean out the outside area around the shaft there's normally a lot of dirt underneath. ThereMoreFirst clean out the outside area around the shaft there's normally a lot of dirt underneath. There then find a way to blow air around the sticks one way would be to use canned.
How to disassemble a controller?
Disassemble your controller using a pry tool and T-8 or T-9 safety Torx to take apart the case and a T-7 Torx to remove the circuit board.
What to replace in a controller?
Replace with new springs, or springs taken from another controller.
What Is Xbox One Controller Drift?
The most common situation involves drift in the left analog stick, which usually manifests in your character constantly looking up in first-person games. However, the right stick can also suffer from drift issues. You may also notice that when you move one of the analog sticks in any direction, it will continue registering that movement even after taking your thumb off the stick.
What to do if thumbstick pads feel loose?
If the thumbstick pads feel loose, remove them.
Can you replace an analog stick?
In some cases, you’ll find that one or both of your analog sticks are just worn out and need to be replaced. This is an even more complicated repair, and you shouldn’t attempt it if you aren’t comfortable with desoldering and soldering.
Can you replace a thumbstick on an Xbox 360?
If only one thumbstick is giving you trouble, only replace the springs on that thumbstick. A lot of controllers, including Xbox 360 controllers, use the same analog stick component as the Xbox One controllers, so you can take springs from an old controller.
How to fix Xbox One controller?
Here are some fixes that require taking apart your Xbox One controller, including advice on what to do after you've opened the controller up: 1 Malfunctioning d-pad: Carefully pry up the tabs on the spring assembly so it pushes down with more force. Replace if necessary. 2 Drifting analog sticks: Clean or replace the analog stick units as necessary. 3 Inoperable audio jack: Verify that the jack is properly seated and making contact, and replace if necessary. 4 Sticking buttons: Use canned air and other methods to remove gunk and other buildup after removing the circuit board assembly from the controller housing.
Why Take Apart an Xbox One Controller?
If your Xbox One controller isn't working right, and you've already updated the firmware and gone through some basic troubleshooting like checking the batteries, the next step is usually going to be taking the controller apart.
What to use to pry a controller?
For the prying tool, you can use anything that's thin enough to fit inside the gap between the controller housing and the end covers. Try to use a plastic tool if possible to avoid damaging the housing of your controller.
How to remove gunk from controller?
Sticking buttons: Use canned air and other methods to remove gunk and other buildup after removing the circuit board assembly from the controller housing.
How to remove a spring steel D pad?
Use a prying tool or tweezers to carefully pop off the spring steel d -pad ring.
Can you clean buttons and analog sticks?
From this view, you can clean the buttons and analog sticks, remove the analog sticks, remove the d-pad ring and d-pad, and more.
How to identify Xbox One controller?
The controller can alternatively be identified by a label inside the battery panel on the back that reads "Wireless Controller for Xbox One".
When was the Xbox One controller released?
The Xbox One Wireless Controller 1537 (7MN-00001), was released in 2013 and is bundled with the Xbox One gaming console as well as sold separately. It is a fairly new device in the gaming world but has proven to be a widely popular controller nevertheless.
What are the buttons on Xbox 360 controller?
The Start and Back buttons found on the 360 controller have been replaced with the Menu and View buttons, respectively. The triggers on the Xbox One controller have been mounted with individual rumble motors to enhance the gaming experience.
Why do Xbox One controllers have rumble motors?
The triggers on the Xbox One controller have been mounted with individual rumble motors to enhance the gaming experience.
What is the model number of the Xbox controller?
This includes repair information for model numbers 1537, 1697, 1698 ( Elite), 1708, and 1914.
What is the color of the controller?
The standard color of the controller is all black; however some limited edition colors have been released.
What color are Xbox One thumb sticks?
The thumb sticks feature a coarse texture on the edges to allow the gamers’ fingers to grip the thumb sticks better. The Xbox button now glows white when the controller is switched on. The standard color of the controller is all black; however some limited edition colors have been released.
