Instructions.
- Shut Off the Water. First, shut off the water supply to the old faucet—usually by turning off the fixture shutoff valves.
- Disconnect the Water Supply Tubes.
- Remove the Old Faucet.
- Tip. The manner in which a faucet is secured can vary, depending on the manufacturer and design. Some faucets are held in place with mounting nuts ...
- Attach the New Faucet.
How to clean the strainer on an Aquasource faucet?
• Clean carefully by gently wiping with a grit-free damp cloth. • Use only mild soap with water. • Never use acids, harsh chemicals, or abrasive detergents to clean the faucet surface. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION There is a leak under the handle. The cartridge is damaged. Remove the handle and replace the cartridge.
How to replace faucet in bathroom?
Steps Download Article
- Inspect your sink. Check to see how many openings there are and how far apart they are. ...
- Obtain a replacement faucet. You'll probably be using this faucet for a long time, so it's worth investing in a good-quality faucet.
- Review the instructions that come with the faucet. ...
- Consider buying a basin wrench for under $20. ...
How to replace #0749746 Aquasource bathroom sink cartridge?
loose. O-ring on cartridge is dirty or damaged. Aerator is dirty or misfitted. Cartridge needs to be replaced. Tighten the retainer nut. Clean or replace O-ring. Unscrew the aerator to check rubber packing or replace the aerator. Remove handle assembly. Take out existing cartridge and discard. Replace with new cartridge and reassemble.
How to find Aquasource faucet part?
Aquasource faucet replacement parts. 1980 19 80 prime. Luckily a little bit of upkeep can go a long way so you should have several more years of worry free performance. Guaranteed by mon jan. Find your aquasource faucet box and look for the model number on the side. Items in search results. Free shipping on eligible orders.
How do you remove AquaSource bathroom faucet cartridge?
0:312:51How to Remove a Faucet Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipBy turning them counterclockwise.MoreBy turning them counterclockwise.
How do you remove AquaSource faucet handle?
Look underneath the sink for the AquaSorce faucet's supply valves. ... Hold a towel underneath the water supply valves. ... Loosen the other end of the supply hoses where they connect beneath the AquaSource, using a pair of pliers. ... Disconnect the sprayer hose, if present, from the underside of the AquaSource.More items...
How do I replace an AquaSource faucet?
InstructionsShut Off the Water. ... Disconnect the Water Supply Tubes. ... Remove the Old Faucet. ... Attach the New Faucet. ... Connect the Water Supply Tubes. ... Connect the Linking Hose (If Needed) ... Begin Installing the Drain Assembly. ... Attach the Drain Assembly.More items...•
How do you fix a leaky faucet with two handles?
0:563:40Fix a Leaky Faucet Double Handle DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're going to take a look at our sink and see if that shut off the water to indicate which side isMoreWe're going to take a look at our sink and see if that shut off the water to indicate which side is leaking push that back in shut the other side off. I'm going to take a look at our faucet. That's
How do you remove a screwless faucet handle?
Once you find the necessary tools, you'll need to follow these steps to remove the screwless faucet handle successfully.Step 1: Turn off the water. ... Step 2: Remove the cap on top of your faucet. ... Step 3: Remove the hidden set crew. ... Step 4: Remove the faucet handle. ... Step 5: Rinse off mineral deposits.
How do you remove a screwless tap handle?
0:265:17how to remove a tap with no screw with Inspire DIY Kent ThomasYouTubeStart of suggested clipEnd of suggested clipSo some of these taps have a little grub screw around the back that can be undone with an allen. KeyMoreSo some of these taps have a little grub screw around the back that can be undone with an allen. Key if they don't have a grub screw around the back then they'll be the type that unscrews.
What brand is compatible to AquaSource?
Instead, AquaSource faucets are compatible with parts that can also be used with other faucet brands. In particular, Glacier Bay — Home Depot's equivalent to AquaSource — cartridges by DANCO will work in AquaSource faucets. You can find these anywhere DANCO products are sold, from Lowe's to Amazon to Home Depot.
What brand is AquaSource?
In 2008, LF, LLC trademarked the name 'AquaSource,' and this is the company that has ownership of Lowes.
How do you replace a bathroom faucet handle?
0:371:32Handles: Repair and Replace (2 Handle Bathroom Faucet) - YouTubeYouTubeStart of suggested clipEnd of suggested clipScrewdriver. Now use a Phillips screwdriver to unscrew and remove the handles from the cartridge.MoreScrewdriver. Now use a Phillips screwdriver to unscrew and remove the handles from the cartridge. Place the new handles on and tighten using the Philips screwdriver. Finally pop the caps back.
Why does my faucet drip after I turn it off?
If you notice your bathroom sink drips or leaks out of the faucet head when turned off, there is likely an issue with the seal inside the faucet head, allowing the water to run through or drip. Before calling a professional plumber, consider whether you're able to repair the leak in your bathroom sink yourself.
How do you fix a leaky faucet stem?
0:121:48How to Repair a Leaky Faucet Stem - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure you turn the water off take your handle. Off. Then you can remove the stem you'll need aMoreMake sure you turn the water off take your handle. Off. Then you can remove the stem you'll need a crescent wrench or a pair of pliers. Once. You have the stem removed.
Why is my bathroom faucet dripping?
The most common sources of a leaking faucet – a worn out washer or gasket, a loose O ring, corrosion in the valve seat – can be detected and fixed easily with most faucet repair kits.
How do you replace a bathroom faucet handle?
0:371:32Handles: Repair and Replace (2 Handle Bathroom Faucet) - YouTubeYouTubeStart of suggested clipEnd of suggested clipScrewdriver. Now use a Phillips screwdriver to unscrew and remove the handles from the cartridge.MoreScrewdriver. Now use a Phillips screwdriver to unscrew and remove the handles from the cartridge. Place the new handles on and tighten using the Philips screwdriver. Finally pop the caps back.
What brand is AquaSource?
In 2008, LF, LLC trademarked the name 'AquaSource,' and this is the company that has ownership of Lowes.
What to do if your Aquasource faucet is leaking?
If you find that your AquaSource faucet is dripping from the spout, leaking water from the handles or becoming difficult to turn on and off, you may need a new cartridge. A cartridge is one of the only replacement parts you'll be able to find to fix your AquaSource faucet, and sometimes, it's more cost effective to purchase an entirely new faucet.
How much does an Aquasource faucet cost?
However, AquaSource's faucets, which range in price from $11.98 to $33.15 at Lowe's, are sometimes cheaper to replace altogether. For example, purchasing a cartridge to repair a leaking AquaSource faucet could cost more than $16 from Amazon.
What to do if your hot water cartridge stops leaking?
If the leak stops, the hot water cartridge is the problem. If it still leaks, the cold water cartridge should be replaced. Open the hot water valve again and repeat the process with the cold water valve just in case both cartridges are faulty. Advertisement. references.
Does DANCO work with Aquasource?
In particular, Glacier Bay — Home Depot's equivalent to AquaSource — cartridges by DANCO will work in AquaSource faucets. You can find these anywhere DANCO products are sold, from Lowe's to Amazon to Home Depot. There's no guarantee that all cartridges labeled for Glacier Bay will also work with AquaSource, but it's a helpful place to start.
Can you use Aquasource faucets with Glacier Bay?
Instead, AquaSource faucets are compatible with parts that can also be used with other faucet brands.
Can you visually inspect Aquasource faucets?
You can visually inspect and compare each model until you find one that matches the exact design and dimensions of the cartridge you pulled out of your AquaSource faucet. Plus, a knowledgeable store attendant can assist you in your search or custom order the correct part if you can't find what you need. Advertisement.
How do I install an Aquasource bathroom faucet?
First, shut off the water supply to the old faucet. Disconnect the water supply tubes from the tailpieces on the faucet, using a basin wrench or channel-type pliers. Remove the faucet that is currently installed in the sink.
How do I change the water supply on a faucet?
Connect the water supply tubes to the faucet, using channel-type pliers. It is always better to change the water supply tubes when installing a new faucet unless the existing ones are fairly new. Attach the hot and cold water supply lines to the corresponding threaded tailpieces of the faucet. To tighten the water lines, it is a good idea ...
How do I install a faucet on a sink?
From the top of the sink, put the faucet into place over the three faucet openings. To fasten the faucet into place, reach under the sink and install the lock nuts onto the two threaded tailpieces. Before completely tightening the lock nuts with a basin wrench, check to make sure that the faucet is centered and straight.
How do I install a sink drain assembly?
To install the drain assembly, first, separate the pop-up drain components. Slip the rubber washer onto the pop-up body and drop the pop-up into the sink drain opening. Position the opening for the ball rod so that it faces back. From under the sink, slip the washer and nut onto the pop-up drain body and tighten.
How to tighten a water line?
To tighten the water lines, it is a good idea to use two pliers so you can hold the shut-off valve or the faucet while tightening the supply tube connections . Be careful to not over-tighten when using pliers. To install the drain assembly, first, separate the pop-up drain components. Slip the rubber washer onto the pop-up body and drop ...
How do I check if a faucet is leaking?
Checking for leaks is the final step of any faucet installation. First, turn on both the hot and cold sides of the faucet and check for leaks under the sink. Allow the water to run for a couple of minutes, as some faucet leaks are not obvious right away.
What tool to use to remove a faucet?
A basin wrench is the best tool to use when removing the mounting nuts holding the faucet in place. This is a good time to clean the sink and remove any old putty or hard water build-up.
Problems You May Face From AquaSource Toilet
It is quite common to face different problems with flushing toilets and related home appliances.
Ways To Solve Some Major Problems
As we can see, the AquaSource toilet doesn’t come without the common household toilet-related problems. So the solutions are also quite common, applicable to toilets of other brands as well.
Regarding The Brand Aquasource
AquaSource is a very reputed brand in the bathroom appliance niche. Consumers tend to believe this brand for quite a long time. It has been providing top-quality home improvement products and home appliances.
