A service overhaul on an Atmos Clocks consists of an ultrasonic cleaning of the movement, all necessary service parts, adjustments, and calibration. Both the case and glasses are cleaned while the clock is repaired. Parts that are worn and no longer functioning correctly are identified and repaired or replaced at the time of the service overhaul.
Full Answer
What is the average repair time for an Atmos clocks ‘overhaul’?
The average repair time for the ‘Overhaul’ on most Atmos Clocks is approximately * 8-10 weeks, which includes the time required for speed adjustments.
How do I care for my Atmos clock?
Cleaning and Caring for Your Atmos Clock Keep Atmos Clocks away from direct sunlight and avoid exposure to excessive heat or cold.
Why choose Atmos clocks?
Since Atmos Clocks run by Perpetual Motion, they do not require any manual winding and when running properly, they can run keep accurate time for many years before any type of service is required.
When should the suspension spring of an Atmos clock be replaced?
In some rare cases, the Suspension Spring of an Atmos Clock that is 50+ years may need to be replaced if the spring has an unusual amount of wear and does not function properly.
Can an Atmos clock be repaired?
An 'Overhaul' on an Atmos Clock consists of an ultrasonic cleaning of the movement, all necessary repair and adjustments, plus recalibration (re-timing) the Movement. All Glass Panels are removed and cleaned while the clock is repaired.
How much does it cost to service an Atmos clock?
Jaeger-LeCoultre Atmos Clocks are always subject to a minimum estimation fee of $135.00. The estimation process includes complete disassembly of the clock, cleaning of the internal components and inspection of the mechanism.
How do I open my Atmos clock?
1:002:54How to Lock and Unlock The Atmos Clock by Jaeger LeCoultre - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what you want to do is carefully tilt the clock backwards. And hold this balance steady and don'tMoreSo what you want to do is carefully tilt the clock backwards. And hold this balance steady and don't yank it don't push it don't don't get too rough with it just hold it carefully.
Why does my Atmos clock keep stopping?
An Atmos keeping good time does not need any periodic maintenance. Once an Atmos clock starts stopping it generally means that it needs a Clean and an overhaul, very little amounts of dirt will bring your atmos clock to a stop.
What model Atmos clock do I have?
The Serial Number of an Atmos Clock is usually located on the top of the Movement, by the Speed Adjustment Lever. On some very older models, the serial number may actually be on the front of the Movement -near the hands and on Antique Reutter Clocks the serial number is often on the Back "Drum" portion.
How do I clean my Atmos clock?
Clean the Exterior Never use harsh chemicals on it and be gentle when cleaning. Cotton swabs can be helpful for getting into corners and tight spots. Take your Atmos clock to a professional for regular maintenance to ensure it is clean and will be running at optimal levels for its lifetime.
How do you wind a Lecoultre Atmos Clock?
7:3211:21How to Wind and Unwind Atmos Clock Cal. 540 Classique - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut your finger on the movement. And hold it in place. And carefully loosen this you don't want toMorePut your finger on the movement. And hold it in place. And carefully loosen this you don't want to whack your palate fork and damage that.
How an Atmos Clock works?
Instead, the Atmos clock gets its power from minute changes in atmospheric temperature (hence the name). Here's how it works: inside every Atmos clock is a capsule filled with ethylene chloride gas. As temperature rises and falls, the gas expands or contracts, making the capsule expand or contract in turn.
How do you change the time on a Lecoultre Atmos Clock?
3:3913:32How to Regulate Jaeger LeCoultre Atmos Clock - YouTubeYouTubeStart of suggested clipEnd of suggested clipMoving from shelf to shelf at home is no problem just locking it and stopping it this way orMoreMoving from shelf to shelf at home is no problem just locking it and stopping it this way or regulating like we're going to show you here. So we've gone over those parts in any way at home just stop
How do you fix a clock that keeps stopping?
5:247:41"My Clock Keeps Stopping"- How to set the beat. - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd just gently push and Bend very very very slightly and then release.MoreAnd just gently push and Bend very very very slightly and then release.
How do you fix an overwound clock?
Fixing An Overwound ClockClean The Clock. Sometimes cleaning your clock will get it working again. ... Lubricate The Mechanism. Like cars, all mechanical clocks need regular oiling. ... Replace The Springs. ... Find A Professional.
What causes a pendulum to slow down and stop swinging?
When the swing is raised and released, it will move freely back and forth due to the force of gravity on it. The swing continues moving back and forth without any extra outside help until friction (between the air and the swing and between the chains and the attachment points) slows it down and eventually stops it.
How much is a Jaeger LeCoultre clock?
Limited edition of 10 pieces worldwide; price, $570,000. The Atmos Infinite: 215mm diameter x 253mm in height; movement, mechanical Jaeger-LeCoultre caliber 570, torsion pendulum/annular balance with 60-second oscillation. Hours and minutes; case, glass cylinder.
How does an Atmos Clock work?
The balance wheel of the Atmos clock is suspended in time from a steel alloy wire which is thinner than a hair. It moves at a rate of just two vibrations per minute, which is 60 times slower than a traditional clock, and 14,400 times slower than a wristwatch.
Atmos Clock Service and Repair Centre
UK Specialist workshop for Jaeger-LeCoultre Atmos Clock servicing and repairs
Jaeger-LeCoultre Atmos Clock specialist workshop
The Atmos clock was invented in 1928 by Jean-Léon Reutter, and then perfected and manufactured by Jaeger-LeCoultre, the Atmos clock came close to fulfilling the ancient dream of perpetual motion. The Atmos extracts its energy from the slightest variations in temperature.
How can we help?
All Atmos Clock servicing needs. Contact us today with your details for a quote
How to send your Atmos Clock for Service or Repairs?
We offer a specialist service for Servicing and Repairing any Atmos Clock. Our prices for a service overhaul start from £385, we offer a free evaluation and will provide a fixed price for all work required before we start work, our evaluation is free of charge and with no obligation.
