- Turn off the water to the toilet, unscrew the water supply hose with adjustable pliers and flush the toilet to empty the tank.
- Clear the old wax off the flange with a paint scraper and unhook the closet bolts from the tracks. Inspect the flange.
- Install a repair plate by removing the screws holding the flange to the floor with a Phillips screwdriver.
- Line up the tracks of the repair plate and the flange, then drive the screws that were holding the flange back into the holes from which you removed them.
- Leave the flange screwed to the subfloor if you are going to repair it with a repair ring. ...
- Remove the old ring before using a push-in replacement flange. To do this, unscrew it from the floor and cut across it with a hacksaw.
- Insert a push-in replacement into the flange opening and push down until it is flush against the floor.
- Hook the heads of the closet bolts to the underside of the repair plate, repair ring or push-in replacement and center them in the tracks.
Full Answer
How do you replace a cracked toilet flange?
Things You Will Need
- Adjustable pliers
- Wrench
- Dropcloth
- Newspaper
- Paint scraper
- Phillips screwdriver
- Slot screwdriver
- Repair plate
- Repair ring
- Screws
How to unclog a toilet with a flange plunger?
The Best Drain Cleaners & Hacks for Busting Stubborn Clogs: Liquid Cleaners, Plungers, Drain Snakes
- Liquid Drain Cleaners. For most people, when there’s a stubborn clog in our drains that just won’t go away, we reach for our trusty bottle of Drano, the king among ...
- Plungers. ...
- DIY Drain Cleaning Solutions. ...
- Specialized Drain Cleaning Tools. ...
How do I remove the old toilet flange?
Removing an Old PVC Toilet Flange
- Get your internal pipe cutter and insert the small circular saw into the drill chuck. ...
- Use the internal pipe cutter to separate the flange from the waste line by cutting at the point where they meet, which are 3 to 4 inches from the flange’s ...
- When you have cut through the whole flange, lift it straight off the subfloor.
How to repair a loose flange on a toilet?
Part 5 Part 5 of 5: Securing the Toilet in Place
- Set the toilet straight down on top of the flange. Line up the holes in the toilet base with the 2 bolts that protrude from the flange.
- Place the washers and nuts onto the exposed bolts. Put a plastic washer onto each bolt first, then follow with a metal one.
- Reconnect the water supply hose. ...
- Turn on the water supply to the toilet. ...
How do you fix a broken flange on a toilet?
0:051:17How to Repair Broken Toilet Flange - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo begin remove the broken or corroded sections of the existing ring. Next apply liberal amount ofMoreTo begin remove the broken or corroded sections of the existing ring. Next apply liberal amount of silicone to the top of the existing. Ring.
How do you fix a broken PVC toilet flange?
1:469:59Replacing Broken PVC Toilet Flange Part One.flv - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if your flange is broken it's glued on the outside of the pipe. No problem at least you've gotMoreSo if your flange is broken it's glued on the outside of the pipe. No problem at least you've got good pipe. Inside you can break that off with a hammer or chisel whatever just be careful.
What happens when toilet flange breaks?
A broken flange will cause the toilet to move because it is no longer secured to the flange, which is anchored to the subfloor. The constant rocking will likely break the wax seal (located between the toilet and the flange), allowing water to leak onto the substrate and the ceiling below when the toilet is flushed.
Can you repair a flange?
1:087:42Toilet Flange Repair Using a Toilet Flange Extender (Step-by-Step)YouTubeStart of suggested clipEnd of suggested clipYou can also get a toilet flange for pair ring this split. Design goes around the waist stack. It'sMoreYou can also get a toilet flange for pair ring this split. Design goes around the waist stack. It's pretty easy to do and this this replaces corroded and rusted metal rings on PVC and ABS flanges.
How do you use a flange repair kit?
1:1910:00How to Repair a Broken Toilet Flange on Cast Iron, PVC or ABS - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp clean it up as much as it needs to be. So now we have our part which is this is 3d plumbingMoreUp clean it up as much as it needs to be. So now we have our part which is this is 3d plumbing products toilet flange repair kit it's a new product.
Can you put a new toilet flange over an old one?
Apply a generous bead of 100% silicone caulk on top of the old closet flange. And to the bottom of the new closet flange extender. Either slide the new closet flange bolts into the old flange before adding the extender or add them after you adhere the extender to the old flange.
Do you need a plumber to replace a toilet flange?
If you have the appropriate tools and enough strength to lift the toilet, this could be a good DIY project for you. On the other hand, hiring a plumber to replace the flange will ensure that the job is done right by a licensed, experienced professional.
How much does it cost to repair a toilet flange?
around $145 to $165If your toilet is creaking or wobbling, you may need to replace the flange. For a plumber, replacing a toilet flange is a quick and easy job. Assuming no other complications pop up, you can expect to pay around $145 to $165 for this simple repair.
Is the toilet flange glued to the pipe?
This toilet flange is designed to glue on the inside of the pipe or expand inside the pipe. Leave the old toilet flange right in place and glue on the new one at the right elevation for the floor, if it's plastic. The flange should be sitting with the bottom edge flush with the top of the floor.
How do you fix a broken toilet flange on a concrete floor?
1:313:52How to Fix a Toilet - Cement Sub-Flooring Repairs - Part 1 of 2YouTubeStart of suggested clipEnd of suggested clipItself the second way to fix this problem is to cut out the damaged flanges metal ring leaving theMoreItself the second way to fix this problem is to cut out the damaged flanges metal ring leaving the ABS coupling and install an inside fitting flange. The reason this technique is suggested.
Toilet Flange Overview
A toilet flange is a pipe fitting that connects a toilet to the home’s drainage system. It also mounts a toilet securely to the finished floor. There is a variety of toilet flanges to choose from on the market today, such as PVC, ABS, cast iron, copper and stainless steel, depending on your particular application needs.
Assessing the Problem
In addition to your toilet rocking, there are other warning signs that may indicate your flange is broken including:
Prepping Toilet for Repair
First, turn off the water supply to the toilet by turning the valve in a clockwise direction. The water supply valve should be located behind the toilet just to the left. If a valve is not present, you will need to find another valve located in the basement or crawl space area of the home.
What is a toilet flange?
Learn more... A toilet flange connects the bottom of a toilet to the drainpipe in the floor of the bathroom. When a toilet is leaking from the base, you may need to replace the toilet flange.
How many screws are in a toilet flange?
If so, use a mallet to tap plastic wall anchors into the holes, then drive the screws through the flange lip and into the anchors. Most toilet flanges come with 4 screws, but yours may have more or fewer.
How big should an outflow pipe be?
Measure the interior diameter of the exposed outflow pipe. In most cases, the pipe should measure 4 in (10 cm) in diameter. Jot this measurement down for reference when you go to buy the new flange.
What is the flange made of?
It’s probably either made of PVC but glued to a PVC outflow pipe, or it’s made of cast iron and integrated into the cast iron outflow pipe.
How much does a toilet weigh?
Toilets weigh between 70–120 lb (32–54 kg), so get help if you’re not sure you can lift it. To lift it alone, straddle the bowl, bend your knees, grip the underside of the toilet between the bowl and tank, and lift straight up with your legs (not your back).
Why block sewer pipes?
Blocking the pipe will prevent unpleasant sewer gases from escaping. Some people wait to block up the pipe until after removing the old flange. However, by blocking it now, you stop sewer gases earlier and provide protection against accidentally losing things—wax ring bits, screws, bolts, etc.—down the pipe.
Where to put wax ring on toilet?
However, you can also lay the ring (rounded side up) on top of the toilet flange, then set the toilet on top of it. If you’re using the newer type of “wax ring” that is actually a rubber gasket, lay it rounded side up on the toilet flange and place the toilet on top of it.
