How to Repair Plastic Bumper Scratches
- Apply Masking Tape. Mask off areas around the damaged area that you do not want to be hit by spray paint.
- Sand Bumper. Using firm pressure, sand the damaged area of the bumper until you have smoothed the scratches out.
- Clean Panel. Wipe down the panel with a cleaning towel, then clean the entire area with wax and grease remover.
- Fill Scratches. If you find any scratches that will not sand out, fill them with a thin layer of scratch-filling putty.
- Scuff Repair Area. Using a grey scuff pad, scuff about 10 inches around the repair area. This will help the paint stick and be more durable over time.
- Prime Bumper. Apply a thin layer of primer, wait two minutes, then apply a heavier layer of primer until you have covered any areas exposed by sanding.
- Paint Bumper. Sand the primer using fine-grit sandpaper with light pressure until it feels smooth. Apply multiple coats of paint from a distance of about 10-12 inches.
- Clearcoat Layer. Give the paint five minutes to dry, then apply a light layer of clearcoat. ...
- Did you make this project? Share it with us! We have a be nice policy. Please be positive and constructive.
How do you repair a scratched bumper?
- Factory-matched paint in a spray can
- Automotive spray primer
- Automotive spray clear coat
- Some sheets of coarse and fine sandpaper
- Scuff pad
- Cleaning towel
- Wax and grease remover
- Scratch-filling putty
How to repair your scratched plastic bumper?
- 80 and 40-grit sandpaper for stripping.
- 500 and 600-grit sandpaper for finishing.
- Rubbing alcohol, and abrasive cleaner or stripper.
- Utility blades.
- Black Body filler (for deep scratches.)
- High-quality black bumper polish.
- Polishing rags (microfiber works best.)
Can a scratched bumper be repaired?
Yes, we can absolutely help with repairing bumper cracks as well as scuffs and scrapes. Fixing cracks in the bumper is imperative since a cracked bumper can’t necessarily absorb force as well as an undamaged bumper can. We can help you with any crack your bumper may have, whether that is a small hairline fracture or a larger area of damage.
How much does it cost to repair a plastic bumper?
When these are summed up, it will merely show why it involves so much to fix a plastic bumper. Labor – It costs about $200-$300 at $100 per hour with a duration of about 2 – 3 hours. Painting – It costs about $300-$400 at $100 per hour with a duration of about 3 – 4 hours.
Can scratches on a bumper be repaired?
13:4215:37HOW TO FIX SCRATCH ON CAR BUMPER Like a Pro - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo scratch repair okay right here by turtle wax you get a sponge okay deta like applicator sponge goMoreSo scratch repair okay right here by turtle wax you get a sponge okay deta like applicator sponge go ahead apply some amount. And you need to buff everything everywhere.
How do I get rid of scratches on my bumper?
Rubbing compound, wax, and scratch remover work best on minor scratches. If the scratches are significant, then you'll want to move on to WD-40 or a Magic Eraser. For best results, work with the grain of the paint, not against it. You may need to use a couple of products to fully get rid of the scratches.
Can you repair deep scratch on plastic bumper?
Follow these steps to make sure you get the best results. Step 1: Lightly rub the scratched area with 3,000 grit sandpaper. If you don't have any sandpaper, you could also use non-gel toothpaste to buff the area. Step 2: Wipe down the surface with a microfiber cloth to get rid of any particles or debris.
How much does a bumper scratch cost to repair?
Cash Cars Buyer reports the average costs to be between $325 and $425. Light scratches are typically quick fixes while deep scratches may result in severe paint chips that reveal the metal or plastic of the bumper. Cash Cars Buyer lists the range of scratch repairs as $50 to $600.
Why does toothpaste remove scratches?
Paste-based toothpaste acts as a mild abrasive that levels out the scratch, removing it or making it less noticeable.
How do you get scratches out of plastic car exterior?
Apply a mild abrasive, such as toothpaste, furniture polish, baking soda or plastic polish to the scratch. Try our VuPlex Plastic Cleaning Kit which will also give your surface a gloss finish. Wipe a clean cloth over the paste you have added in a circular motion.
How do you get deep scratches out of plastic?
Baking soda is a gentle mineral abrasive that will buff away scratches on plastic. Combine two parts baking soda to one part water to create a thick paste. Dip a cotton cloth in the paste and apply it to the scratched area. Work in a circular motion to buff away the scratch.
How do you fix a gouge in a plastic bumper?
1:3415:493M Plastic Bumper Cosmetic Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll we're really trying to do is just knock down this cliff edge on the edges of the gouges. AndMoreAll we're really trying to do is just knock down this cliff edge on the edges of the gouges. And also if you no doubt know anytime you contact plastic with a high-speed tool you melt the plastic.
How do you touch up a car bumper?
Add a little bit of bumper touch up paint to your fine-tip paintbrush. Make sure you go over the damaged area lightly using just a tiny amount of bumper touch up paint at a time. The amount of paint on the brush should be very small. Applying the base coat of paint should always be done slowly and methodically.
Is it cheaper to repair or replace a bumper?
Bumper repair can be performed in-shop and is often cheaper than bumper replacement. Bumper repair normally costs between $100 and $1,000.
How much does a paint touch up on a bumper cost?
According to AAA, auto repair labor rates range between $47 and $215 per hour. In most scenarios, the bumper painting process will only take a few hours, which puts labor costs in the $94 to $430 range. Supplies will be in the range of a few hundred dollars, depending on material or color.
How much does it cost to repair a minor scratch on a car?
The deeper your scratch, the more time and materials it takes to repair it. When you're looking for a professional repair here are the prices per scratch: Scuff or Clear Coat Scratch- These superficial scratches can cost as little as $150 up to $300 after paint and labor.
Can toothpaste remove scratches from car?
Similar kind of abrasives is also found in car polish. As you gently rub the toothpaste against your car, the abrasive action removes tiny layers of film and clear coat, removing those ugly marks and leaving a glistening mirror shine.
How do you remove scratches from black plastic?
Thoroughly dust the black plastic surface with a clean cloth. Then wipe it down with rubbing alcohol. Take a small dab of the scratch remover or metal polish and apply to a clean cloth. Buff the affected areas with the remover until the scratch is gone.
How long does it take for a scratch to harden?
If you find any scratches that will not sand out, fill them with a thin layer of scratch-filling putty.#N#Give the putty five minutes for it to harden, then sand it using some coarse sandpaper.#N#You might need to repeat this step again in order to smooth everything out.
What to do if you have a damaged area that you do not want to be hit by spray paint?
Mask off areas around the damaged area that you do not want to be hit by spray paint.
How to sand primer?
Sand the primer using fine-grit sandpaper with light pressure until it feels smooth. Apply multiple coats of paint from a distance of about 10-12 inches. If you encounter any bumps, cloudiness, or what looks like "cat" scratches wait five minutes, sand again, and re-apply paint.
How long does it take for clearcoat to dry?
Give the paint five minutes to dry, then apply a light layer of clearcoat.#N#Wait two minutes and slowly apply a heavier layer, overlapping each pass by around 50%.#N#Give the clearcoat 10 minutes to dry before removing the tape and paper.
How to tell if your bumper is scratched?
You can tell that it’s a faint scratch if it’s still smooth enough to glide your nail across without getting caught in the grooves.
How to fix a damaged bumper on a car?
Sand the area using 80-grit sandpaper to get rid of any overruns. Fill any visible damage in front of the car bumper with the materials from the repair kit.
How to get scratches out of a sandpaper?
Wet your 3,000-grit sandpaper and gently sand the scratch out. Do this until the scratch is no longer visible. Alternatively, you can use toothpaste to buff out this type of scratch. It works just like a 3,000-grit sandpaper, but polishes the affected surface as well. 2.
Why remove bumper cover?
Remove the bumper cover to get better access to all of the surfaces. Source: YouTube | happywrenching
How many RPM to polish a drill?
With the polisher head of the drill at 1,200 rpm, polish the surface until slightly hazy. Finish off with polishing compound.
How many smears can you get from a sanded surface?
Keep in mind that the first three can smear when sanded, while the last two can powder. Be guided accordingly when grinding or sanding.
How long does it take for a sealer to dry?
First, you’ll need to do a wet coat of flexible part sealer and allow it to dry for 30 minutes. After this, apply primer and paint over the part sealer. Usually, two coats of two-part primer surfaces should work. Dry sand the restored surface with 400-grit paper once hardened.
