[Solution] How to Fix My Computer in Safe Mode
After starting Windows in Safe Mode, you can perform most of the regular system maintenance and troubleshooting tasks to fix your computer:
- Scan for Malware: Use your antivirus application to scan for malware and remove it in Safe Mode. ...
- Run System Restore: If your computer was recently working fine but it’s now unstable, you can use System Restore to restore its system state to the earlier, known-good configuration. ...
- Uninstall Recently Installed Software: If you recently installed software (such as a hardware driver or a program that includes a driver) and it’s causing your computer to blue-screen, you can ...
Full Answer
How to fix Windows 10 in safe mode?
After starting Windows in Safe Mode, you can perform most of the regular system maintenance and troubleshooting tasks to fix your computer: Scan for Malware: Use your antivirus application to scan for malware and remove it in Safe Mode.
Is it possible to reset the PC in safe mode?
Unfortunately, Windows is telling me that PC reset is not available in Safe Mode. This presents me with two options. Option 1) restart without Safe Mode. Assuming I initiate the PC reset before it crashes, it can't complete before I get a BSOD, and all changes are reverted. Option 2) reset the PC from the Recovery Environment.
How do I boot my computer into safe mode?
Your Windows PC should automatically start up in Safe Mode if it crashes more than once while trying to start normally. However, you can also boot into Safe Mode manually: Windows 7 and earlier: Press the F8 key while the computer is booting (after the initial BIOS screen, but before the Windows loading screen),...
What can I do when I am in safe mode?
There are a number of functions you can complete when you are in Safe Mode, such as scanning for malware or restoring your entire system. You should keep in mind that if you plan to use System Restore, your computer will fall back to its most recent, successful update.
How do I repair Windows in Safe Mode?
How to get out of Safe ModeUse the Windows + R keys to pull up the Command Prompt.Type in “msconfig” and hit Enter to display the menu.Choose the “Boot” tab.Uncheck the “Safe boot” box if it is selected.Restart your computer.
How do I start my computer in repair mode?
Hold the Shift key down at the Windows sign-in screen and press the Power button at the same time.Continue holding the Shift key, then click Restart.Once the PC restarts, it'll present a screen with a few options. ... From here, click Advanced options.In the Advanced options menu, choose Startup Repair.More items...•
Can I repair Windows 7 in Safe Mode?
In general, if you create a system restore point in advance, you can do system restore in safe mode Windows 7. If not, you can try to repair your computer with Windows 7 system repair disc. But it requires a CD/DVD and the creation may fail.
How do I start an automatic repair in Safe Mode?
Under the Windows Setup window, choose "Next" Navigate to "Repair your computer" > "Troubleshoot" > "Advanced options" > "Startup Settings” Choose the Safe Mode (Enable Safe Mode, Enable Safe Mode with Networking, and Enable Safe Mode with Command Prompt) that meets your needs.
How do I run repair mode in Windows 10?
Here's how:Navigate to the Windows 10 Advanced Startup Options menu. ... Once your computer has booted, select Troubleshoot.And then you'll need to click Advanced options.Click Startup Repair.Complete step 1 from the previous method to get to Windows 10's Advanced Startup Options menu.Click System Restore.More items...•
How do I repair corrupted Windows 10?
How can I fix corrupted files in Windows 10 & 11?Use the SFC tool. 1.1 Run System File Checker. ... Use the DISM tool. ... Run a SFC scan from Safe Mode. ... Perform a SFC scan before Windows 10 starts. ... Replace the files manually. ... Use the System Restore feature. ... Reset corrupted Windows 10.
How do I do a System Restore on Windows 7 from Safe Mode?
The instructions are:Turn on the computer.Press and hold the F8 key.At the Advanced Boot Options screen, choose Safe Mode with Command Prompt.Press Enter.Log in as Administrator.When Command Prompt appears, type this command: rstrui.exe.Press Enter.Follow the wizard instructions to continue with System Restore.
How can I repair my Windows 7?
System Recovery Options in Windows 7Restart your computer.Press F8 before the Windows 7 logo appears.At the Advanced Boot Options menu, select the Repair your computer option.Press Enter.System Recovery Options should now be available.
Can you use System Restore in Safe Mode?
Use System Restore in Safe Mode From the settings window that appears, click “Restart now” under the “Advanced startup” heading. When your PC restarts, click Troubleshoot, then Advanced options, then System Restore. You should then be able to run System Restore as normal.
Why is F8 not working for Safe Mode?
The reason is that Microsoft has reduced the time period for the F8 key to almost zero interval (less than 200 milliseconds). As a result, people almost can't press the F8 key within such a short period of time, and there is little chance to detect the F8 key to invoke the boot menu and then start Safe Mode.
Can I use F8 in Windows 10?
First, you have to enable the F8 key method But on Windows 10, the F8 key method doesn't work by default. You have to manually enable it. 3) Paste the copied command into the Command Prompt (right-click in the Command Prompt to paste), then press the Enter key on your keyboard. 4) Reboot your PC.
What do I do if Windows Startup Repair doesn't work?
If you cannot use Startup Repair, then your option is to disable automatic restart, run chkdsk and rebuild bcd settings....Type following command lines and press Enter after each to fix Startup Repair stuck issue:bootrec /fixmbr.bootrec /fixboot.bootrec /rebuildbcd.
What Is Safe Mode?
Safe Mode is a diagnostic mode of a computer operating system. It also can be recognized as a mode of operation by application software. Safe Mode is used to help to fix most problems within the operating system. It is also widely used for removing rogue security software.
How to Fix Windows 10 Stuck in Safe Mode?
In this section, we will show you how to fix the error of Windows 10 stuck in Safe Mode.
Final Words
To sum up, in order to fix the error of Windows 10 stuck in Safe Mode, this post has shown 3 solutions. If you come across the same error, try these solutions. If you have any different idea to computer stuck in Safe Mode, you can share it in the comment zone.
How to get to safe mode on PC?
1. Press “Enter” when you’ve highlighted which mode you want to run. 2. Once you have identified the problem, power down the PC. 3.
How to start Windows 7 in safe mode?
For Windows 7 or below, press the F8 key just like you would if you were trying to enter Safe Mode. When the Advanced Boot Options menu is activated, use your arrow keys to select the “Start Windows Normally” option. For Windows 8 and 10, visit the Shutdown menu and do the following: 1.
What happens when you are in safe mode?
There are a number of functions you can complete when you are in Safe Mode, such as scanning for malware or restoring your entire system. You should keep in mind that if you plan to use System Restore, your computer will fall back to its most recent, successful update.
What does safe mode do?
When you use Safe Mode in Windows, you’re given the ability to make repairs to your operating system . The mode limits Windows to its most basic functions, which allows you only to access the key drivers. You can also make the decision to reboot your computer in Safe Mode with or without networking options, which can be helpful if you need ...
Why is safe mode important?
Accessing Safe Mode can be ideal for making repairs when your hardware has been compromised. Windows has made it relatively easy to enter into Safe Mode and make changes on your own. Much of knowing how to navigate Safe Mode is being aware of which options take you to which menus.
How to get my computer to start in safe mode?
1. Press and hold the Shift key while you select Power > Restart from the Start menu. 2. After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings .
How to restore Windows 10 to safe mode?
1. Search “recovery” in the Windows 10 search box and select the top result Recovery. 2. In the pop-up window, click Open System Restore. 3. When you launch System Restore, click Next. 4. Select one of the available restore points to do system restore in Safe Mode.
How to backup and restore a computer?
Easier way to backup and restore computer system 1 There are four types of backup available: System/Disk/Partition/File Backup, which meets your different needs. 2 You are allowed to restore your computer to an earlier date and recover lost files easily from the backup image. 3 If your computer fails to boot, you are able to restore your computer under WinPE using the Windows recovery drive made by AOMEI Backupper.
How to restart a computer after a reboot?
1. Click the Start menu and open Settings > Update & Security > Recovery. 2. You’ll see the recovery options available for your PC. Under Advanced startup, select Restart now. 3. After your PC restarts to the Choose an option screen, you can repeat Step 2 and 3 in Method 1.
Why do we restore in safe mode?
Why to perform System Restore in Safe Mode? System Restore is a recovery tool that allows users to revert their computer's state (including system files, installed applications, Windows Registry, and system settings) to that of a previous point in time. It is of great help to recover from system malfunctions or other problems.
How to turn off a computer when it's not working?
1. Hold down the power button for 10 seconds to turn off your PC. 2. Press the power button again to turn on your PC. On the first sign that Windows has started, hold down the power button to turn off your PC. 3.
How to get Windows 10 to start in safe mode?
Step 2. After you get into the Choose an option screen, you can click Troubleshoot -> Advanced options -> Startup Settings -> Restart, to enter into the Startup Settings window. Step 3. Next press F4, F5, or F6 to choose a desired Safe Mode option to start Windows 10 in Safe Mode while booting.
What is safe mode in Windows 10?
Safe Mode is a built-in diagnostic mode of Windows 10 (7, 8, etc.) computer operating system. If you start Windows 10 PC in Safe Mode, it will only allow starting up basic system programs and services in booting process. A Windows 10 PC booted in Safe Mode is a stripped down version of computer.
Why isn't F8 working in Windows 10?
And we know that this method isn’t working in Windows 10 and 8 because Windows 10/8 has much faster booting speed. However, you can still make F8 work again in Windows 10 with the BCD (Boot Configuration Data) Edit command. Step 1. Open Administrator Command Prompt window.
What to do if your computer crashes?
Remove Malware or Virus. If your computer is crashed or stops working because of malware or virus infection, you may boot Windows 10 in Safe Mode to scan and remove malware/virus. You can also use Windows Defender in Windows 10 to scan and kill the malware and virus in PC.
Is Safe Mode connected to network?
Both Safe Mode and Safe Mode with Command Prompt are not connected to network. Let’s cut to chase, check how to start Windows 10 in Safe Mode in these 6 ways, namely, through Settings, msconfig (System Configuration), Start menu, F8 key, from sign-in screen, black/blank screen.
