Project Instructions
- Clean the surface of the damaged area by removing any loose material such as dirt, oil, or grease and unsound or flaking concrete.
- Scrub and clean the surface of the repair area with a stiff bristle brush.
- Thoroughly rinse the repair area after cleaning.
- Mix the Quick-Setting Cement using a margin trowel by adding 5 parts Cement to 1 part QUIKRETE Acrylic Fortifier until a lump-free, putty consistency is achieved.
- Dampen the repair area with enough water to saturate the surface (any standing water should be removed).
- Use a masonry brush to apply a thin coating of the Quick-Setting Cement and Acrylic Fortifier mixture.
- Using a margin trowel, press the cement into the repair area using firm trowel pressure.
- Continue to build and sculpt the Quick-Setting Cement so that the surface of the repair is above the surrounding concrete.
- In about 5 to 10 minutes once the patch has become thumbprint hard, use the edge of a margin trowel to mold and shape the repair to match ...
How do you fix a damaged concrete project?
Project Instructions 1 Clean the surface of the damaged area by removing any loose material such as dirt, oil, or grease and unsound or flaking concrete. 2 Scrub and clean the surface of the repair area with a stiff bristle brush. 3 Thoroughly rinse the repair area after cleaning. More items...
Can broken concrete edges and corners be repaired?
Repairing broken concrete edges and corners requires a special fast-setting repair material that can be molded and shaped to match the contour of the surrounding concrete, without sagging.
What should I do if my asphalt driveway is damaged?
If damage to your driveway is in a small, confined area, you might be able to make the repairs yourself with asphalt patching material or filler. You’ll first want to clean the area and remove any weeds. Or you can always save yourself the trouble and contact your local asphalt contractors.
How do you remove unsound concrete from a driveway?
TIP: unsound or flaking concrete can be removed by using a hammer and chisel or with a masonry grinding disk and a portable drill. Scrub and clean the surface of the repair area with a stiff bristle brush.
How do you fix the edges of a concrete driveway?
Dampen the repair area with enough water to saturate the surface (any standing water should be removed). Use a masonry brush to apply a thin coating of the Quick-Setting Cement and Acrylic Fortifier mixture. Using a margin trowel, press the cement into the repair area using firm trowel pressure.
How do you fix concrete edge in garage?
0:127:50How to Fix and Repair Cracked and Chipped Concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo i'm going to probably lay a little plastic in here or i might just carve it with my trowel soMoreSo i'm going to probably lay a little plastic in here or i might just carve it with my trowel so it's not adhering to this that way when they move it won't pop the patch with it.
How do you repair concrete curbing?
4:296:02CONCRETE CURB REPAIR (part 2 of 3) Mike Haduck - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'm just gonna get some cement all right here mama like that kind of holes. So. Then I just get aMoreSo I'm just gonna get some cement all right here mama like that kind of holes. So. Then I just get a sponge with a little water in it go over to fill all those holes.
Can a concrete driveway be patched?
Rather than ripping out the concrete and starting over, you can often save money by repairing your driveway, as long as the concrete is structurally sound. If you aren't sure of the structural integrity of your driveway, have a professional assess the condition of your concrete and make repair recommendations.
Can you pour concrete over concrete?
You can put new concrete over old concrete. However, unresolved issues with your old concrete, such as cracks or frost heaves, will carry over to your new concrete if not taken care of. In addition, you must pour it at least 2 inches thick.
How do you edge concrete after it dries?
These are the 4 steps in how to smooth concrete after it dries:Remove all imperfections on the surface.Vacuum up all debris and apply the adherent.Apply a new layer of concrete.Sand the surface and wash the concrete.Apply a layer of vitrifier to protect the concrete.
How do you use Quikrete Vinyl concrete Patcher?
0:000:46QUIKRETE Vinyl Concrete Patcher (Product Feature) - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a margin trowel. The first layer should be pressed into the repair area using firm trowel.MoreUsing a margin trowel. The first layer should be pressed into the repair area using firm trowel. Pressure. Then simply smooth the surface of the patch. So that it is level with the surrounding.
How do you fix spalled concrete?
0:402:47Concrete Surfaces Spalling - Sherwin-Williams - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll need a water source mixing bucket variable speed drill mixing paddle steel trowel safetyMoreYou'll need a water source mixing bucket variable speed drill mixing paddle steel trowel safety glasses and a respirator. Before getting started make sure the surface is clean dull dry.
What is best to patch concrete?
The patches leave no trace: DIYers can tool them to blend in with the rest of the surface.BEST OVERALL: Red Devil 0644 Pre-Mixed Concrete Patch.RUNNER-UP: Damtite 04072 Concrete Super Patch Repair.BEST BANG FOR THE BUCK: Quikrete #862013 5.5 Oz Concrete Repair.BEST FOR FLOORS: Henry, W.W. Co.More items...•
Can you skim coat a concrete driveway?
If your driveway has excessive chips that detract from the overall beauty of your front yard, skim coating it will significantly improve the appearance. Pouring a thin, new layer of concrete over the old surface will smooth out any chips or pits and give you the opportunity to add color.
How do you fix a low spot on a concrete driveway?
Repairing Small Holes Add patching compound to the hole, 1/2 inch at a time, with a trowel. Let it dry completely before adding another layer. Continue in layers until it's slightly above the level of the driveway. Trowel the compound over the patched area until it's level with the rest of the driveway.
How do I fix the edges of my garage floor?
1:305:16How To Repair Concrete | Pro Tips For Repairing Concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipOr you can use a vinyl concrete patching agent and a putty knife to fill it in for a wider crack youMoreOr you can use a vinyl concrete patching agent and a putty knife to fill it in for a wider crack you will need to use a small sledgehammer.
How do you repair corners on a concrete wall?
1:032:05Concrete Repair Tips for Beginners - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe flat trowel is great because again it allows you to mold and shape the quick setting cement. AndMoreThe flat trowel is great because again it allows you to mold and shape the quick setting cement. And get the shapes that you need to match your stoop.
How do you repair a concrete garage wall?
0:431:43How to Repair Cracks in Vertical Concrete Surfaces with QUIKRETEYouTubeStart of suggested clipEnd of suggested clipAnd for cosmetic repairs the best option is to use a textured acrylic caulk. Quick read concreteMoreAnd for cosmetic repairs the best option is to use a textured acrylic caulk. Quick read concrete repair is a sanded acrylic caulk designed to match the color and texture of the surrounding.
What is best to patch concrete?
The patches leave no trace: DIYers can tool them to blend in with the rest of the surface.BEST OVERALL: Red Devil 0644 Pre-Mixed Concrete Patch.RUNNER-UP: Damtite 04072 Concrete Super Patch Repair.BEST BANG FOR THE BUCK: Quikrete #862013 5.5 Oz Concrete Repair.BEST FOR FLOORS: Henry, W.W. Co.More items...•
What to do if your cement is too wet?
TIP: if the mix is too wet, add additional Quick-Setting Cement and mix thoroughly; if the mix is too dry, add small amounts of Acrylic Fortifier sparingly. Step 5. Dampen the repair area with enough water to saturate the surface (any standing water should be removed). Step 6.
What to do when working with cement?
When working with cement-based products, always wear eye protection and waterproof gloves. Clean the surface of the damaged area by removing any loose material such as dirt, oil, or grease and unsound or flaking concrete.
What to do if your cement is too wet?
TIP: if the mix is too wet, add additional Quick-Setting Cement and mix thoroughly; if the mix is too dry, add small amounts of Acrylic Fortifier sparingly. Step 5. Dampen the repair area with enough water to saturate the surface (any standing water should be removed). Step 6.
What is the first step in concrete repair?
The first step in achieving a successful concrete repair is proper surface preparation . A solid, clean surface is necessary so that the repair material can permanently bond to the damaged area. It is extremely important to remove any unsound or flaking concrete from the repair area.
How to clean unsound concrete?
Once the unsound concrete is removed, the surface should be cleaned of any loose material, dirt, oil and grease, prior to the application of quick-setting cement. Using QUIKRETE Concrete and Asphalt Cleaner, scrub and clean the surface of the repair area with a stiff bristle brush. Concrete and Asphalt cleaner is a concentrated detergent ...
How to build quick setting cement?
Quick-setting cement should be built up in layers using a margin trowel. The first layer should be pressed into the repair area using firm trowel pressure. Continue to build and sculpt quick setting cement up, so the surface of the repair is above the surrounding concrete.
How long does it take to repair thumbprints?
In about 5 to 10 minutes once the patch has become thumbprint hard, use the edge of a margin trowel to mold and shape the repair to match the contour of the surrounding concrete.
Can you add water to cement after it has set?
It is important not to add more water or acrylic fortifier after the material has begun to set. If you do, this will weaken the mix and can cause shrinkage cracking. Before applying the quick-setting cement, dampen the repair area with water. Enough water should be used to saturate the surface.
Why does my driveway fall off?
A common problem with asphalt driveways is that they break loose at the edges and crumble. Homeowners’ bad habits such as driving off the side of the driveway can advance the deterioration of your edges , causing them to fall away in places.
What is a 45 degree grading on a driveway?
Edging refers to the method of securing the sides of your driveway to prevent cracking, crumbling, and other damage. Take a look at most asphalt driveways, and you’ll notice that they have edges with a 45-degree grading. Your driveway must have this to help transfer stress from the asphalt to the solid ground beneath it.
How long does it take to drive on asphalt?
Asphalt is affordable for starters, and after installation, you can typically drive on it within 72 hours. This durable driveway option can stand up to weather and both vehicle and foot traffic. But asphalt is not entirely immune to wear.
Can you add asphalt to a damaged driveway?
If the driveway’s edge is severely damaged and a part of it is missing, adding new asphalt to repair it is in order. This process may require you to chip away at the damaged area’s edge so that you create a straight line. You also might need to add gravel, like you would a pothole, and compact it in the same manner.
Can you bind hot asphalt?
But, keep in mind, cold asphalt sometimes doesn’t bind as well as hot asphalt. If you’re dealing with a more extensive damaged section, you’ll want to contact a contractor to professionally repair your driveway.
Can you repair cracks in asphalt?
After you have your new border in place, you can repair the cracks and crumbles to restore the asphalt surface. If damage to your driveway is in a small, confined area, you might be able to make the repairs yourself with asphalt patching material or filler. You’ll first want to clean the area and remove any weeds.
