how to repair cracked plastic pool steps

^{Materials Needed:}

• Step One: Remove Water To repair your pool step you'll need your step to be clean and dry. ...
• Step Two: Identify the Crack In the photo below you will see the step has a crack which has been previously repaired, but is in need of a new repair. ...
• Step Six: Recoat / Repaint

How to clean stained pool steps?

You can remove most organic pool stains by:

• Shocking your pool
• Applying granular chlorine to the stain
• Allowing the chemicals to absorb
• Scrubbing the stained area

How to maintain a pool step by step?

Part 4 of 4: Maintaining Your Pool's Filters

1. Manually clean your pool daily, if possible. Use brushes, cleaners, and debris catching devices to remove surface dirt and excessive amounts of leaves or branches.
2. Keep your pool's water between 1/3 and 1/2 way up the opening of the pool skimmer. This is the level at which your pool operates best.
3. Pour in water before backwashing and vacuuming. ...

More items...

How do you repair leaking swimming pool steps?

• Are there any leaks at the equipment pad? Look closely at the filter, pump, heater and the pipe valves.
• Are there any wet areas around the pool? Check the ground for moisture. ...
• Do you have a vinyl liner pool? Look for tears or separations around all the fittings, skimmers, returns, cleaner line, lights, steps and the corners.

How to level out pool steps?

• If there are any areas that you need to level, use crushed limestone instead of sand.
• Order masonry sand from a home improvement store or pool retailer to ensure the grains are evenly sized and debris-free. ...
• Double check the sand for rocks, large grains, and other debris when you spread it.

How do you fix plastic steps in an inground pool?

0:484:14How To Repair Your Inground Pool Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf we do any kind of grease. Or dirt of any kind will be embedded into the plastic. When we go toMoreIf we do any kind of grease. Or dirt of any kind will be embedded into the plastic. When we go to use the acetone to actually smooth the scratches.

Why are my pool steps cracking?

The plasticizers can migrate from the vinyl liner or the gasket, making the material brittle and causing a crack to appear. And if the inground pool step has been leaking for a period of time, the fill material which was originally there to stabilize the step can wash away, creating a void and weakening the step area.

How do you resurface fiberglass pool steps?

Apply a coat of gel and a fiberglass clothApply masking tape a couple of inches around the repair area.Use a paint roller and apply a layer of gel.Apply the fiberglass cloth while the gel is still wet.Use a ribbed roller to remove any folds or bubbles.Apply a last layer of gel and allow it to dry.More items...•

Can you replace pool steps?

Steps are an essential element of pool design, flowing seamlessly into the pool's appearance and function. While they're typically built into the pool structure, they can be added during a renovation with our inground pool steps replacement services.

How long do pool steps last?

Because they combine exceptionally high impact resistance with an integral, one-piece design, our pool kit steps will last for years without corroding, splintering, delaminating or puncturing. In addition, outstanding resistance to UV light and to extreme weather and ground conditions means even greater longevity.

How do you caulk around a pool step by step?

1:303:08Caulking Around Your Swimming Pool - YouTubeYouTubeStart of suggested clipEnd of suggested clipI recommend using a glove because it's nasty stuff to wash off with water soap and a scrub brush. IMoreI recommend using a glove because it's nasty stuff to wash off with water soap and a scrub brush. I used a large nail to pierce the seal inside the tube. And i carried the tube on cardboard.

How do you fix a crack in fiberglass?

Here's how.Drill a tiny hole at each end of the crack. This will stop the crack from extending any further.Examine the crack. ... Wipe the crack with a dry rag to make sure it's clean and dry. ... Fill the crack with a fair amount of fiberglass epoxy resin, using a plastic applicator. ... Let the epoxy dry for a day.

Can you fix a crack in a fiberglass pool?

For minor cracks, simply cover it with fiberglass paint. For more severe cracks, generally cracks that measure between ½-inch deep and extend 1-inch in length on both sides, the crack and surrounding area may need to be sanded down, with any loose particles removed.

What are pool steps made of?

Swimming pool stairs can be constructed from a wide range of materials, such as fiberglass, steel, and polymer, which each have unique pros and cons.

How much does it cost to put stairs in a pool?

Pool Steps While you can find cheaper DIY options for about $200, installing permanent stairs will cost roughly $2,000.

Are pool ladders made of fiberglass?

They come in a wide range of material such as vinyl-over steel, vinyl over polymer, thermoplastic or acrylic fiberglass pool steps.

Can you add steps to vinyl pool?

Yes, steps can be added, and it is perfect to do this when you are doing a liner replacement anyway. Check out these concrete steps that were formed and poured into this existing vinyl liner pool. The pool was then measured for a new custom fit liner, with the steps vinyl covered for a new way to enter/exit this pool!

Can I paint my pool steps?

So, for all you do-it-yourselfers, that is the go-to paint. White two epoxy paint is what we would recommend you using to do your own painting of the stairs After.

How do you fix a crack in fiberglass?

Here's how.Drill a tiny hole at each end of the crack. This will stop the crack from extending any further.Examine the crack. ... Wipe the crack with a dry rag to make sure it's clean and dry. ... Fill the crack with a fair amount of fiberglass epoxy resin, using a plastic applicator. ... Let the epoxy dry for a day.

How do you use pool Putty?

Simply mix 1-to-1, mold putty in your hands, and apply to the area where leak or crack. STOPS LEAKS & FILLS CRACKS: Once the putty is applied to the leak/crack, it will harden underwater where it will cure/harden. It will not shrink or sag....Go to your orders and start the return.Select the return method.Ship it!

How do you fix a hairline crack in a fiberglass pool?

For minor cracks, simply cover it with fiberglass paint. For more severe cracks, generally cracks that measure between ½-inch deep and extend 1-inch in length on both sides, the crack and surrounding area may need to be sanded down, with any loose particles removed.

How to clean scratches on steps?

You can also use the denatured alcohol to the clean the steps from any marks or dirt without damaging your steps. Take a fresh rag and pour a very small amount of acetone on it. Using the rag you just poured acetone on, lightly rub it over the area of the step that has scratches (the section you just cleaned).

Can acetone be used on fiberglass steps?

Do not allow acetone to come into contact with vinyl liners. This method cannot be used for acrylic or fiberglass steps.

What is a crack injection kit?

Polyurethane Foam Crack Injection Kit permanently repairs leaking cracks and voids in inground pool steps. It's used in conjunction with other AquaBond products. The white polyurethane foam in this low-pressure injection kit expands to 25 times its original volume. When cured, this permanent, waterproof resin maintains its volume and flexibility and is not subject to shrinkage, even through normal ground movement and thermal cycles.

How long does it take for sand and foam to expand?

Inject foam slowly through hole into wet sand slurry at multiple angles to create a good sand-and-foam foundation under the step. The foam can take 20-25 minutes to fully expand so be patient. It expands as much as 15-25 times its original volume so inject slowly and pay attention to how things are going.

Can Aquaflex be used on pool steps?

It's a highly durable, cost-effective solution versus replacing a leaking step gasket in an inground pool. AquaFlex Underwater Sealant can be used easily on almost any material and works extremely well as a sealant for step gasket or crack repair.

Step 1

Drain the water in the inground pool to the level of the cracked steps.

Step 3

Prime the crack by brushing it with one coat of PermaFlex liquid rubber ultra-adhesive.

Step 4

Mix liquid rubber base and thickening activator at a ratio of 2:1. This simply means twice as much liquid rubber base than thickening activator in the mix regardless of the total amount to be used. Use a putty knife to profile and patch the crack using this mixture.

Step 6

Apply the swimming pool epoxy over the area. Use the same brand and style already present in the rest of the pool.

Step 1

Drain the water in the inground pool to the level of the cracked steps.

Step 2

Spray the pool liner with the hose every two minutes to keep it wet during repairs thus preventing damage. If this proves too much of a hassle while concentrating on repairing the steps, then ask a friend for help.

Step 3

Use a putty knife to fill the crack with underwater fiberglass/epoxy repair adhesive. Allow the adhesive to dry for 30 minutes. Continue spraying the pool liner with the hose every two minutes to prevent damage from drying.