Repairing Guides

how to repair damaged kitchen cabinets

by Dr. Gordon Smith Published 3 years ago Updated 2 years ago
image

  • Clear The Cabinet. Open the cabinet and check what you can save. Remove everything that you can save from the cabinet. ...
  • The Level of Damage. Determine first what caused the damage in the first place. Was it leaking water or high humidity? ...
  • Make & Take The Action. Now, before you think about what to do to repair the damage, get rid of any standing water or dry out the dampness.
  • Get Rid of Stains. If the problem has been going on for a while, the woods/particle boards may have darkened already. You will notice blackening stains on the cabinets.
  • Replace Beyond Repairable Parts. While repairing, you may find out some parts of the cabinets are totally damaged and beyond repair. ...
  • Get Rid of Bad Smell. You need to get rid of bacteria and pathogens. So disinfect it using any kitchen cleaner. ...

Part of a video titled Fix a Hole or Chipped Cabinet - Ace Hardware - YouTube
0:41
5:35
So you can fill this in now these are actually a little plant sticks. But you could use paint sticksMoreSo you can fill this in now these are actually a little plant sticks. But you could use paint sticks you could use a tongue depressor. Whatever. You have that's large enough to go along this edge.

How to repaint kitchen cabinets the right way?

Prepare to Paint Kitchen Cabinets

  1. Assess the Cabinet's Condition. Determine the condition of your cabinets. Surfaces that are already painted can be painted again if the existing paint is in good condition.
  2. Empty the Cabinets and Remove the Doors
  3. Remove Dirt and Grease, and Repair Damages
  4. Prep the Area and Sand
  5. Vacuum the Area. Applying primer is an important step in the painting process. ...

How to refinish your old kitchen cabinets?

Tips for Refinishing Kitchen Cabinets

  • The “Before”. ...
  • Protective Measures. ...
  • Preparation Pays Off. ...
  • Degrease. ...
  • Prep, Part One: SVT. ...
  • Prime Time! ...
  • Application. ...
  • Prep, Part Two: Repeat SVT. ...
  • Top It Off. ...
  • De-Prep (Almost There!) Once everything has dried to the point where you can handle it, start by removing the tape and plastic from the cabinets.

More items...

How to properly clean kitchen cabinets?

Tips for Keeping Kitchen Cabinets Clean Longer

  • Dust your cabinets at least once every two weeks with a soft cloth, rag, or standard duster. ...
  • Clean up spills as soon as they happen with a damp cloth or sponge. ...
  • Cabinets installed near a self-cleaning oven are prone to damage from the intense heat that can escape from a faulty heat gasket seal. ...

More items...

How to refurb kitchen cabinets?

Using Paint to Restore Cabinets

  • Using a paint stripper, remove as much of the old finish as possible. ...
  • Repair any dents, scratches, or other surface damage with wood filler.
  • When the newly smoothed surfaces are dry, sand them with 100 grit sandpaper, then 180 grit, and lastly 220 grit.
  • Paint in any color you want; wipe surfaces with a tack cloth before applying sealant.

More items...

image

How do you repair damaged laminate cabinets?

1:232:41Laminate Cabinet Door Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipGet them to cut the piece a little bit smaller than the original sighs. Bring it back and glue it onMoreGet them to cut the piece a little bit smaller than the original sighs. Bring it back and glue it on. File. It off and clean it with lacquer thinner.

Can you repair a kitchen cabinet?

Introduction. Kitchen cabinets work hard, and all that opening and closing creates a variety of problems. Most are inexpensive and easy to fix, so take a day and plow through them—it'll be like having a new kitchen.

How do you refinish a damaged cabinet?

0:171:39How to Restore and Refinish Wood Kitchen Cabinets - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse the floral steel wool. Go ahead and pop it right in those areas those dry. Areas water damageMoreUse the floral steel wool. Go ahead and pop it right in those areas those dry. Areas water damage steam damage. You can let that set for an hour or you can let it set overnight.

How do you fix a water damaged cabinet?

9 Steps For Repairing Kitchen Cabinets After Water DamagePrepare the cabinets for repair. ... Use a shellac-based primer on the wood. ... Apply plastic wood filler if necessary. ... Get sanding that cabinet door! ... Repeat the previous steps if necessary. ... Start painting your kitchen cabinet! ... Sand the painted cabinet doors down.More items...

How can I redo my kitchen cabinets without replacing them?

0:331:394 Ways to Update Kitchen Cabinets Without Replacing Them (Part 1YouTubeStart of suggested clipEnd of suggested clipAnother great way to accent your kitchen cabinets is by adding crown molding crown molding can fillMoreAnother great way to accent your kitchen cabinets is by adding crown molding crown molding can fill space between your cabinets.

How do I restore my kitchen cabinets on a budget?

3:326:36How to Restore your kitchen cupboards on a budget ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is now just have one coat of paint it will need a further two but this is giving you an effectMoreThis is now just have one coat of paint it will need a further two but this is giving you an effect of the finish. And how much nicer that looks when that awful mucky wood.

How can I restore my kitchen cabinets without sanding and varnishing?

1:025:20Refinish Kitchen Cabinets Without Stripping - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp.MoreUp.

How do you make old cabinets look new?

0:528:5710 Cheap Cabinet Makeover Ideas for Limited Kitchen - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use different colors for a brand new look just like this kitchen. The homeowner decided toMoreYou can use different colors for a brand new look just like this kitchen. The homeowner decided to paint his dull cabinets great to infuse an upscale look of a modern farmhouse kitchen.

How do you rejuvenate kitchen cabinets?

0:181:15Rejuvenate Cabinet & Furniture Restorer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd furniture first clean the surface with a mild multi-surface cleaner to remove any grime and oilyMoreAnd furniture first clean the surface with a mild multi-surface cleaner to remove any grime and oily residue you. Can use the rejuvenate floor cleaner to do this.

Can water-damaged kitchen cabinets be repaired?

As we've noted, wet cabinets can be cleaned, dried and repaired. However, it's difficult to work with badly damaged MDF and plywood. Both materials can be salvaged, but the process requires special drying equipment and techniques. Consider contacting a certified restoration company.

How do you fix water-damaged kitchen cabinet doors?

Depending on the extent of the water damage, you might be able to repair kitchen cabinets. If the water has delaminated parts of the cabinet, use carpenter's glue and clamps to repair the damage. Spread the carpenter's glue between the delaminated layers of the cabinets, then use the clamps to press them back together.

How do you fix water-damaged particle board cabinets?

Follow our step by step instructions below to repair water-damaged boards in your home.Dry the wet area. ... Buff off the raised area with sandpaper. ... Cut out damaged areas of the board with a knife. ... Add wood filler to the holes. ... Sand the area to finish the repair. ... Conclusion.

How much does it cost to repair kitchen cabinets?

The national average cabinet repair cost is $302, with most projects ranging between $131 and $473. Refinishing or repainting can add between $1,000 and $4,100 to your final cost. Repair options like refacing or repainting can change the look of your cabinets without a total replacement.

How do you fix kitchen cabinets that are peeling?

InstructionsPull Back the Thermofoil Layer. Have a helper hold the peeling thermofoil away from the MDF. ... Scrape the Cement. Scrape away dried cement from the MDF core.Apply the Contact Cement. ... Wait to Press. ... Press Together and Secure. ... Clean Up.

How do you fix peeling laminate cabinets?

Unscrew the hinges from the cabinet with a screwdriver. ... Lay the door flat and peel back the laminate with your fingers as far as it will go. ... Apply solvent-based, waterproof contact cement to the exposed core as well as the underside of the laminate surface that you peeled away, using a small paintbrush.More items...

How do you fix water damaged particle board cabinets?

Follow our step by step instructions below to repair water-damaged boards in your home.Dry the wet area. ... Buff off the raised area with sandpaper. ... Cut out damaged areas of the board with a knife. ... Add wood filler to the holes. ... Sand the area to finish the repair. ... Conclusion.

How Does Water Damage My Kitchen Cabinets?

Badly soaked MDF swells, distorts and crumbles. Water-damaged plywood buckles as its layers split and splinter.

How Can I Protect My Kitchen Cabinets From Water?

The job consists of applying a smooth, water-resistant material to exterior cabinet walls and doors. Laminating is an effective way to protect cabinets and change the looks of your kitchen, but it doesn’t completely waterproof the cabinets.

Why are my kitchen cabinets wet?

This will depend, in large part, on whether your cabinets got wet due to a burst pipe, high humidity, or leaking water.

How to contact ServiceMaster by Zaba?

Your reliable, local service company in Chicago, we’ll help you repair your kitchen cabinets to full functionality: 773-647-1985

What happens when you put wet cabinets in?

Wet cabinets also spread water damage to other areas of the kitchen. Moisture wicks into dry cabinets, baseboards, flooring and drywall. The dark, damp space creates an ideal environment for mold and mildew.

What to do if your kitchen cabinets are damaged beyond repair?

If you notice that there are parts of the cabinet that are damaged beyond repair, it’s time to replace them.

What to do when a cabinet is dry?

Once the cabinet is dry, you can evaluate the damage further, and gather supplies. As a general rule, it’s smart to have carpenter’s glue, clamps, and screws on hand. Keep in mind that a professional will carry these items if you intend to hire one.

How to make drawer slides glide?

A few minutes of cleaning and lubricating can make drawer slides glide almost like new. Start by removing the drawers so you can inspect the slides. You can remove most drawers by pulling them all the way out, then either lifting or lowering the front of the drawer until the wheels come out of the track. Wipe the tracks clean and coat them with a light spray lubricant. Also lubricate the rollers and make sure they spin easily.

What does it mean when a cabinet door doesn't close?

Most newer cabinets have self-closing hinges that hold the doors shut. Others have magnetic or roller catches. A catch that no longer keeps a door closed is either broken or out of adjustment. Catches are fastened with two screws, so replacing a damaged catch is simple. Adjustment is just as simple, but you might have to readjust the catch a couple of times before you get it right. Loosen the screws, move the catch in or out, and tighten the screws. If the door doesn’t close tightly, try again.

What is Euro hinge?

Euro hinges are designed for easy adjustment. If the door isn’t flush with the doors next to it, adjust the depth screw. This screw moves the door in or out. Some depth screws move the door as you turn them. But with most, you have to loosen the screw, nudge the door in or out and then tighten the screw. If your hinges don’t have depth screws, ...

How to adjust a door that doesn't close?

Adjustment is just as simple, but you might have to readjust the catch a couple of times before you get it right. Loosen the screws, move the catch in or out, and tighten the screws. If the door doesn’t close tightly, try again.

How to fix loose nails?

Remove nails, staples or screws from the loose joint and scrape away old glue with a utility knife. Predrill nails holes and glue the joint. Predrill 1/16-in. holes for nails, apply wood glue to the joint and nail it together with 1-1/2 in. finish nails.

What to do if your slides are bent?

To keep the project simple, buy new slides that are identical (or almost identical) to the old ones. That way, replacement is an easy matter of unscrewing the old and screwing on the new.

How to hide scratches on kitchen cabinets?

If you have shallow scratches or nicks, hide them with a stain-filled touch-up marker. Dab on the stain and wipe off the excess with a rag. But beware: Scratches can absorb lots of stain and turn darker than the surrounding finish. So start with a marker that’s lighter than your cabinet finish and then switch to a darker shade if needed. For deeper scratches, use a filler pencil, which fills and colors the scratch.

How to fix a corner on a drawer?

To fix the corner, first remove the drawer front, if possible. Most fronts are attached by screws driven from inside the drawer. Remove any fasteners from the corner, then scrape away the old glue with a utility knife. Reglue the corner, tap the sides back together and clamp the drawer until the glue dries. Step 10.

How to make drawer bottoms not wavy?

The thin plywood used for drawer bottoms sometimes gets wavy. Stiffen up the bottoms with 1/4-in. or 3/8-in. plywood. Cut the plywood to fit over the drawer bottom, leaving about a 1/4-in. gap on each side. Apply wood glue on the drawer bottom and set the plywood over it. Set a gallon or two of paint over the plywood to hold it in place until the glue dries.

How to fix a stuck drawer in a cabinet?

The fix for sticking drawers is easy. First remove the drawer. Wipe the drawer slides and the cabinet track with a clean cloth to remove any debris. Then spray a dry lubricant directly on the drawer slides. Cans are sold at home centers; it'll say “dry lubricant” on the label. Replace the drawer and slide it in and out of the cabinet several times until it glides easily. If the drawer is still hard to open, replace the drawer slides.

How to fix a drawer that is coming apart?

Some drawers are held together by only a few drops of glue or short brad nails. When you first notice a drawer corner coming apart, take out the drawer and fix it. And if one corner is failing, others probably will too. Save yourself future hassles by repairing all the weak corners now. Place a piece of scrap wood against a corner and lightly rap it once with a hammer. If the corner comes apart, fix it. If not, it should hold up.

How to stop drawers from closing?

That can prevent doors and drawers from closing properly. Fix the problem with glue and toothpicks. Start by removing the hardware. Then apply a drop of wood glue to the ends of toothpicks and cram as many as will fit into the hole (maybe only two or three). Wipe away any glue that drips out.

What do you do if your cabinet door won't close?

If you have these and your door won't close or stay closed, loosen the screws to slide the catch forward or backward on the cabinet frame. Or replace it if it's broken. The catches are available at home centers.

How to check if door is higher or lower than door?

If the door is higher or lower than adjacent doors, loosen the mounting screws on both hinges, raise or lower the door, then tighten the screws .

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9