- Tap the lock with a small hammer Hammering is the basic way to fix a deadbolt lock turning but not unlocking. ...
- Clean and lubricate the deadbolt lock When dirt and foreign materials enter the key passage, or the lock is left for a long period without use, the lock ...
- Door alignment
Full Answer
How do you unlock a deadbolt lock?
- Hold the chain lock in your hands.
- Lift the chain out of the metal casing.
- Open the door.
- Open the door from the outside.
- Slip your hands through the door and wrap one end of the rubber band around the chain lock as close to the metal casing as possible.
How to remove deadbolt lock without screws?
How to Remove a Kwikset Deadbolt Lock without Screws Instruction. Step 1. Position in a way that you are facing the deadbolt from the inside part of your house. Step 2. Remove the thumb-turner latch. Step 3. Pry the plate using a flat screwdriver. Step 4. Unscrew the mounting screws.
How do I drill out a deadbolt lock?
What to Do
- Check if your lock can be drilled or not. Before you start with the tutorial, you must make sure that your lock can be opened through drilling.
- Place a center punch above the keyhole. A center punch will serve as a guide as you drill a hole. ...
- Drill a hole through the cylinder of the lock. ...
- Drill again using a larger bit. ...
How to rekey Kwikset locks and how they work?
The rekeying instructions on how to use a Kwikset Smart Key include:
- Rotate the working key at 90 degrees clockwise after insertion.
- Use the Smart Key tool on the keyway’s hole by inserting the key in it. ...
- Insert the new key after you remove the working key, and that’s it!
- The newly inserted key should be rotated inside the lock at 90 degrees anti-clockwise.
Can a deadbolt lock be repaired?
Whether you'd like to attempt a deadbolt repair or need to replace your deadbolt locks, hiring a professional locksmith company to do the job might be the best decision. Home security is of utmost importance, so you need a trustworthy, experienced locksmith to do the job if you want to enjoy peace of mind.
How do you fix a deadbolt lock?
A shot of dry Teflon spray will fix a jammed door lock and keep the bolt operating smoothly. If your deadbolt sticks or is jammed, give it a shot of Teflon lube spray to get it operating smoothly again. It only takes five minutes.
Why would a deadbolt stopped working?
Remember, the tolerances in the door locks are tight, and if one or more things are loose, all of them combined can lead to the door locks not working. The issue may be seasonal swelling. This is a very common problem in parts of the country where the summer heat and humidity cause wood doors to swell.
How do you reattach a deadbolt?
0:392:16How to Replace a Deadbolt | HGTV - YouTubeYouTubeStart of suggested clipEnd of suggested clipOut now you're ready to replace your old deadbolt with a new one. The latch assembly will beMoreOut now you're ready to replace your old deadbolt with a new one. The latch assembly will be installed. First.
Why is my deadbolt not unlocking?
Sometimes the lock is stuck because the parts inside it have disengaged. Take a small hammer to the body surrounding the keyhole. Twist the key back and forth as you tap on the lock with your hammer. This might take a while as it'll take the parts time to fall back into place and work to open the lock.
What are the parts of a deadbolt lock?
What are the Parts of a Deadbolt?Thumb-latch / Thumbturn. The thumb-latch (or thumbturn) is the part of your deadbolt inside your home that you use to lock and unlock your deadbolt.Deadbolt. The deadbolt is the piece of the lock that secures your door shut.Turnpiece / Tailpiece. ... Keyhole.
How do you fix a lock that won't turn?
0:032:18How to Repair a Door Lock Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you find it difficult to turn the key in the door lock. Then just take a small tube of graphiteMoreIf you find it difficult to turn the key in the door lock. Then just take a small tube of graphite lubricant shake. It up a little bit. And then shoot a cup of puffs.
What causes a deadbolt to stick?
A sticking deadbolt is a common nuisance for homeowners. It can be caused by debris, weather, and general wear and tear.
What to Do If lock is not opening?
Lock is stiff and difficult to open You can apply some graphite spay or silicone based lubricant in the lock, put the key back in and turn it a few times. Never use oil based products such as WD-40 to lubricate locks because although they may help initially, they tend to cause problems with clogging later on.
Can you replace a deadbolt yourself?
However, if you are replacing a deadbolt, you will only need a lock, screwdriver and lubricant for an easy process. It's vital to ensure the deadlock is in alignment with the cylinders, screws and strike plates.
How do you replace a deadbolt cylinder?
0:508:06Deadbolt Lock Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's a box of locks. Cut off a lot of locks. Interesting stuffs okay I've got the allen key hereMoreIt's a box of locks. Cut off a lot of locks. Interesting stuffs okay I've got the allen key here that opens this particular lock setup just a couple of quick turns. Yeah okay so there you go so the
How do you take a deadbolt cylinder apart?
4:486:14How To Remove Lori Double Cylinder Deadbolt | Mr. Locksmith™ VideoYouTubeStart of suggested clipEnd of suggested clipSo if you run across this lock and you can't figure how to pull it apart so take the strike.MoreSo if you run across this lock and you can't figure how to pull it apart so take the strike.
How do you fix a lock that won't turn?
0:032:18How to Repair a Door Lock Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you find it difficult to turn the key in the door lock. Then just take a small tube of graphiteMoreIf you find it difficult to turn the key in the door lock. Then just take a small tube of graphite lubricant shake. It up a little bit. And then shoot a cup of puffs.
How do you fix a popped out lock?
1:104:12How to Repair a Door Lock. THE EASY WAY! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what you need to do is you need to go for a dry lubricant. Something like a silicon spray or inMoreSo what you need to do is you need to go for a dry lubricant. Something like a silicon spray or in this case a graphite powder. And graphite is a super fine powder.
How do you fix a lock that keeps spinning?
The reason your key is turning all the way around is because the little piece that transmits turning power from your hand to the deadbolt (actuator) has broken or become detached. The only way to fix the problem is to remove the lock/ locking mechanism from the door.
Step 2: Locate and Mark the Interference on the Deadbolt Lock
Is the problem persisting? It’s time to identify exactly where the strike plate is interfering with the insertion of the deadbolt lock.
Step 3: Enlarge the Strike Plate Opening as Needed
Using a hand file, make repeated and even strokes inward until the area covered by the mark is removed. You can now close the door and check again, making any adjustments as necessary until the bolt passes easily. Then, clean up the marking substance when done.
Additional Precautions and Tips for Deadbolt Locks
Remember that your door is only as strong as its greatest physical weakness, and that’s the doorjamb at the point where the deadbolt enters (learn more about door parts ). With security in mind, there’s often a beefy strike plate surrounding the opening, but that alone isn’t always enough.
If You Really Want To Step Up Your Front Door Security. Check Out This Video!
Home Owner, Real Estate Investor, and Creator (YouTube). Here to help others save time and money through doing their own home repairs and improvements.
How to fix a deadbolt lock that sticks?
Then, lock and unlock the door several times to distribute the oil throughout the lock. Repeat the process if necessary.
What to look for when deadbolt lock is not working?
One of the first things to look at when a deadbolt lock is not working properly is the key . Keys can get worn down after years of use and may not work properly. A new key can be made at most home-improvement and hardware stores, and even some department stores.
How long do deadbolt locks last?
Most deadbolt locks work the same, although the look and style of a bolt lock can vary. Deadbolt locks typically last a long time and a little maintenance will prevent having to replace the lock prematurely.
What to do if a lock doesn't work?
If it doesn’t, it reduces the safety level of the lock and should be fixed. It is also an easy fix that requires the removal of the strike plate. A drill can then be used to deepen the mortise. Replace the strike plate and test the lock.
How to line up a lock and strike plate?
To line up the lock and the strike plate so that the lock goes into the hole easily, try filing around the edge of the actual lock and the strike plate. File only the sides that are needed in order to have a proper fit for the lock. If misalignment is still an issue, the strike plate will have to be removed.
How to remove a deadbolt?
Remove the screws of the deadbolt. The face of your deadlock that is on the inside of your home should have two screws on it. Remove these screws with a screwdriver. The part of the lock that the screws are in is known as the “faceplate.”.
Why replace deadbolts?
Replacing a deadbolt, which should be done if your lock is ever compromised, is a quick and simple process no matter what type of door or lock you have! Because deadbolts are meant to provide a high level of security against forced entry, you should monitor it often so that you notice signs of damage or wear immediately.
What is a set plate?
The set plate is the piece of metal that faces the doorframe and connects the bolt to the doorframe. It is the part of the lock that is visible on the side of the door. There should be a screw on the top and the bottom of the set plate. Remove both screws.
What is the best way to protect against forced entry?
Buy a sturdy lock. Deadbolts are stronger than other types of locks and are your primary defense against forced entry. Thus, you should buy strong locks from a reputable brand, to ensure that no one can force the door open. Your new deadbolt should have a metal strike plate.
How many holes are there in a bolt?
Altogether, there are three holes that run along the bolt. One, in the center, connects the exterior facepiece to the bolt. The other two, to the left and the right of this central hole, connect the interior facepiece to the bolt. ...
How to measure the size of a door lock?
1. Measure the size of the lock. To ensure that your new lock fits in its opening, use a tape measure to check the size of the hole where your lock used to be. Then, measure the “setback,” the distance from the doorframe to the hole. Finally, measure the thickness of your door.
Where do you put the bolt and set plate?
The bolt and set plate should slide directly into the hole in the side of your door that faces the doorframe. If the bolt and set plate are separate, slide the bolt in first, and then put the set plate over it to secure it in place. ...
1. Poorly installed lock
Sometimes the problem isn’t in the mechanism or the product itself, but the installation of the lock. If the lock hasn’t been installed properly, it’s no wonder the key turns but the deadbolt won’t unlock, or there is another issue with the deadbolt mechanism.
2. Faulty deadbolt
In case you can’t detect any other issue with your deadbolt, the problem could be the deadbolt itself – especially if it is brand new. Once you’ve ruled out all the other problems and factors, take a closer look at the deadbolt and its components.
3. Damaged deadbolt
Perhaps you haven’t purchased a faulty deadbolt, but it got damaged in the process of use. Just like any other door element, the deadbolt is prone to normal wear and tear, and if you haven’t replaced it in years, it could be that it has reached its “expiration date”.
4. Jammed metal keeper plate
If the deadbolt won’t turn from inside, it could be that the core issue lies in a metal keeper plate jam. If the small opening in the metal keeper plate gets stuck, the entire lock mechanism will be compromised – including the deadbolt.
1. Lubricate the lock
The first step you can take, and the first thing even a professional would recommend, is lubricating the lock. This is usually the best solution in case the lock is jammed due to a buildup of dirt or rust.
2. Tap the lock with a hammer
Sometimes all it takes to fix a jammed lock is to tap it with a hammer, as it may help the disengaged lock components to return back into place. If this is the case, all you will need is the lock key and a small hammer.
3. Clean and examine the deadbolt
As we’ve mentioned, the best long-term solution to many potential issues with your deadbolt is to remove it from the door and inspect it thoroughly. This is the only way to locate and remove any buildup, replace any damaged elements, or detect a faulty mechanism.
