Repairing Guides

how to repair drain pipe under kitchen sink

by Prof. Gloria Ratke Published 3 years ago Updated 2 years ago
image

How to Fix Pipes That Come Loose Under Your Sink

  • 1.. Remove any supplies or equipment from the area under the pipes. Place a 1-gallon plastic bucket under the P-trap --...
  • 2.. Observe the pipes and connections. If you notice water dripping from a ring nut, tighten the nut clockwise with...
  • 3.. Loosen the ring nut at the leaky connection counterclockwise with the pliers.

Part of a video titled Kitchen Sink Plumbing - How to Replace a Kitchen Sink Trap
4:42
5:39
Cut my extension pipe to size and I'm going to slip it up I've got a nut in the washer above it. AndMoreCut my extension pipe to size and I'm going to slip it up I've got a nut in the washer above it. And we'll just snug that down and now I'm going to take my trap I've got a nut and a washer above. It.

Full Answer

How to install the plumbing for a kitchen sink?

Usually the most efficient order of work is the following:

  • Cover sensitive surfaces and remove old cabinets, flooring, and wallcoverings.
  • Install the rough plumbing—the drain, vent, and supply lines.
  • Install electrical wiring and boxes and cut a hole for an exhaust fan if included.
  • Apply new drywall and patch any damaged walls. ...
  • Install the flooring, then cover it with a protective drop cloth.

More items...

How to plumb any kitchen sink?

  • Get rid of previous sink pipe Sink pipe does the function of draining your wastewater. ...
  • Install a Wye on the drainage line There are specific two units that you are planning to work on your drainage line. ...
  • Cut the trapes into shape All the P-traps need to fit perfectly in the right holes. ...

More items...

How to repair a leak under the kitchen sink?

Planning & preparation

  • A leaking sink is generally caused by the washers, the plastic seals between the sink and the strainer, being old, perished or damaged
  • Firstly, try and work out where your leak is coming from. ...
  • To check whether the washers are causing the problem, simply fit your plug and fill the sink with cold water, then wait to see if the level drops. ...

More items...

How do you change a sink drain?

  • Use a wrench/Channellock to disconnect the locknut holding the flange in place and remove it together with the washer
  • Clean the top of the sink as well as underneath the drain flange.
  • Just like with the kitchen sink flange, apply a good size of plumber’s putty or silicone caulk bead under the rim of the flange.

More items...

image

How do I fix the pipe under my kitchen sink?

0:2814:57How To Fix Kitchen Sink P-Trap Leaking | Pipe Connection NutYouTubeStart of suggested clipEnd of suggested clipIf that's gonna sink pig driver uses one of the pores. So make sure you get the right one so usuallyMoreIf that's gonna sink pig driver uses one of the pores. So make sure you get the right one so usually when you go to Home Depot the green ones are for the bathroom. The purple bags are for the kitchen.

How do you fix a broken PVC pipe under the sink?

Epoxy. Repair epoxy is putty or viscous liquid that can be used to repair pipe leaks on PVC and its joints. To repair your pipe or joint using epoxy, first clean and dry the damaged area, ensuring water can't reach the affected area. If necessary, mix the putty or liquid according to the manufacturer's directions.

How do you fix a hole in a pipe under the sink?

Answer: Two options for patching the hole in your drain trap are the Multi-Purpose Epoxy Putty, as you mentioned, and the Deluxe Pipe Patch Kit. Whether you use putty or a pipe patch will depend on how permanent you want to the solution to be. Putty is often used as a permanent solution.

How do you seal a cracked drain pipe?

0:001:35How to Repair Cracked Drain Pipe [EASY] - YouTubeYouTubeStart of suggested clipEnd of suggested clipLet's go ahead and apply this we get the release liner get an edge started. This release linerMoreLet's go ahead and apply this we get the release liner get an edge started. This release liner started. We're gonna put it right over the hole. And then I'll finish pulling the release liner.

How do you fix a cracked PVC pipe without cutting it?

0:172:21How to Repair Cracked or Leaking Pipes Without Cutting or ThreadingYouTubeStart of suggested clipEnd of suggested clipApply the putty into the repair area pushing it into any cracks and tapering it on to theMoreApply the putty into the repair area pushing it into any cracks and tapering it on to the surrounding surfaces. Body should be held in place until it hardens and adheres usually around 2 minutes.

How do you fix a leaky PVC pipe without replacing it?

There are many ways you can go about fixing a leaky PVC pipe. Four temporary solutions to repair a leaking PVC pipe are to cover it with silicone and rubber repair tape, wrap it with rubber and secure with hose clamp, bond it with repair epoxy, and cover it with fiberglass wrap.

What is the best sealant for leaking pipes?

The following list looks at the best pipe thread sealant for a number of applications.BEST OVERALL: Gasoila – SS16 Soft-Set Pipe Thread Sealant with PTFE.BEST BANG FOR THE BUCK: Dixon Valve TTB75 PTFE Industrial Sealant Tape.BEST FOR WATER: Oatey 31230 Pipe Joint Compound with PTFE with Brush.More items...•

How do you fix a metal pipe under a sink?

0:218:44How To Repair or Replace a P-Trap or Sink Drain Pipe - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd basically a couple minutes no all you have to do or take these channel locks your twist thisMoreAnd basically a couple minutes no all you have to do or take these channel locks your twist this bolt. Here nut whatever left your lefty loosey righty tighty same way with this one here.

How do you fix a hole in a plastic drain pipe?

0:071:11PVC-pipe patch - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is your patch. Now you slather the glue inside of this and making sure that the factory edge isMoreThis is your patch. Now you slather the glue inside of this and making sure that the factory edge is the one that's going to engage the coupling here you spread glue here as well along this edge clip.

Can I use plumbers putty on a cracked pipe?

Epoxy putty Once you are finished sanding, dry the pipe again to remove any particles. Apply the epoxy putty to the cracked plumbing pipe and press it around until it creates a flattened surface that conforms. You must do this quickly as epoxy putty typically starts drying within 1-2 minutes.

Can you use PVC cement to stop a leak?

Joining a pipe to a pipe fitting requires specially formulated primer and cement—no ordinary adhesive but a chemical solvent that melts the surface of the PVC and then quickly re-hardens to fuse the pieces together. The result is an airtight, leak-proof bond similar to what you get with welding metal.

How do you fix a crack in a metal drain pipe?

2:418:12How to Repair Cast Iron Pipe Cracks, Avoid Plumbing Fails - YouTubeYouTubeStart of suggested clipEnd of suggested clipAgain okay so for the jv weld it's similar to bondo it's similar to all the other types of patchesMoreAgain okay so for the jv weld it's similar to bondo it's similar to all the other types of patches and fixes that have some type of an epoxy component to them is we're going to mix up equal amounts.

What kind of piping is used for kitchen sinks?

Common Types of Drain Pipe s for the Kitchen. There are four types of piping that are typically found in residential kitchen plumbing systems: copper, galvanized steel, ABS, and PVC. You may find that the piping for your sink consists of more than one type. While that can become confusing, it isn’t uncommon.

Why replace metal pipes with PVC?

Why You Should Replace Metal Kitchen Pipes with PVC. PVC pipes are the ideal option for residential plumbing. If you currently have metal pipes under your sink, there are some good reasons to upgrade them to plastic PVC pipes. The first reason is that PVC pipe is significantly less expensive to replace. Down the line, if you have ...

What are the pipes under a sink?

There are three main parts: the tailpieces, P-trap, and the compression fittings that hold them together.

What is a P trap?

The P-trap is the curved piece of pipe that attaches to the sink tailpiece. It consists of two parts, the U-bend and the trap arm. The U-bend is the curved section of pipe and the trap arm is the straight section of pipe that is connected to the U-bend.

What is copper pipe?

Copper is a penny-colored metal material that is strong, durable, and heat- and corrosion-resistant.

How to remove a P trap?

Remove the P-trap by pulling it down from the tailpiece and laterally from the waste line. Remember, it has water in the trap, so hold it upright until you get it to a place where you can dump out the water.

Where is the tailpiece on a sink?

The tailpiece, also called sink tailpiece, is the short piece of pipe located between the sink drain at the bottom of the sink and the P-trap. This pipe should be 6”-10” to provide proper drainage.

5 Steps To Replace Pipes Under Kitchen Sink

Step one: Get a container and put it under the drain. Ensure that th e water source is switched off. After this, bring out the drain pipes one after the other. You can seamlessly do this by identifying the drain trap and cutting the pipes below it. Once you’re done with this, unscrew the drains to bring out all the pipes.

How do you remove plumbing under the kitchen sink?

Switch off the valves and ensure that the faucet can’t supply water before you proceed. Place a container under the trap. The next thing is to find the nut that connects the trap to the tailpiece and remove it by turning or unscrewing it with a wrench. Lastly, remove the swivel nut and detach the trap.

What are the pipes under the kitchen sink called?

The pipes beneath your kitchen sink are known as P-traps. They are called traps because they are curved and trap all the dirt emanating from your sink. These curved pipes are installed alongside other fixtures in your sink to make a complete drainage system.

How much does it cost to replace a pipe under the sink?

The average cost of replacing a pipe under the kitchen sink is $100 for most repairs. However, the actual price depends on the job’s size, your conditions, and the coating option you want. Some plumbers might give you a sizable discount based on your status.

Conclusion

The kitchen sink does most of the dirty work in your cooking space. As such, you must ensure they are in perfect working conditions at all times. Usually, there’s an occasional need for swift replacement as the pipes undergo corrosion due to the long-term deposit of waste residues. The replacement might also be due to clogs and persistent blocks.

How to get a corroded nut off a pipe?

Spray the nut with lubricant if it's too corroded to turn. Grip the trap with one pair of adjustable pliers and turn the nut with another pair. Break the pipe to get it off, if necessary, as you'll be replacing it.

What degree does Chris Deziel have?

Chris Deziel has a bachelor's degree in physics and a master's degree in humanities. Besides having an abiding interest in popular science, Deziel has been active in the building and home design trades since 1975. As a landscape builder, he helped establish two gardening companies. Related Articles.

How big is a P trap?

P-traps come in 1 1/4- and 1 1/2-inch diameters, so ensure the replacement is the same diameter as the original. Make sure there is actually a hole before going to the trouble of replacing the pipes. Many leaks are caused by loose connections that can be easily tightened. Warnings.

Can a sink drain leak from a chrome pipe?

If you have chrome or steel drainpipes under your sink, it's just a matter of time before corrosion will cause a leak. The joints between the P-trap and the drain tailpiece are often the first to go, followed by the swivel joints and finally the base of the trap.

Can you fix a corroded drain pipe?

There isn't much you can do to fix corroded holes, and even if you could, another part of the pipes would soon corrode and start leaking. The best course of action is to replace the metal drainpipes with plastic ones that don't corrode.

What happens when a sink drain is loose?

In some cases, when the pipes under a sink come loose, you’ll notice water inside the cabinet or on the floor. Sink drain connections consist of large ring nuts that tighten against nylon washers and provide a seal. When one or more of the nuts loosen or crack, the seal is ineffective and the pipes leak as you run water in the sink.

How to stop water from dripping from a ring nut?

Observe the pipes and connections. If you notice water dripping from a ring nut, tighten the nut clockwise with large adjustable pliers. If the leak persists, turn off the water and proceed to the following steps.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9