PS4 How to: repair/replace Dualshock 4 Rumble motor
- Open the DS4 Controller. First of all, you need to open the controller. ...
- Unplug ribbon cables and battery. Once the two parts of the case are separated, you’ll want to 1) unplug the ribbon cable from the rear part of the case, ...
- Get the broken rumble out. ...
- Insert the new DS4 Rumble motor in its slot. ...
- Solder the new cables. ...
- Test. ...
How to reconnect DualShock 4 to PS4?
The (Potentially) Easier Way: Steam
- Go to the Settings menu in Steam (under Steam on the taskbar).
- Select the Controller menu.
- Click "General Controller Settings."
- Check the box marked "PlayStation Configuration Support."
- Connect the DualShock 4 to your PC.
How durable is the DualShock 4?
- If you use it normally and keep good care of it, 10+ years is possible. Even a 15 year old PC still works fine today. ...
- If you use it excessively without caring about it’s temperature. It might overheat if the airflow is obstructed by dust. ...
- If you drop it, well it’ll depend on how high and how often you drop it. ...
How to replace DualShock 4 thumbsticks?
- Two thumbsticks per purchase, enough for one controller.
- Fits official Xbox One controllers, as well as PS4 Dualshock 4 controllers.
- Requires technical internal fitting - the controller must be opened to install.
- Replace your deteriorating PS4 Dualshock 4 controller thumbsticks with Xbox One thumbsticks! 100% compatible!
How to repair DualShock 4 analog stick input?
How to open up your PS4 controller
- Lay your controller down on your workspace and with a Phillips-head screwdriver remove the four screws on the back of the controller.
- Gently pull the back off your controller. ...
- Once the back is off, carefully unattach the ribbon that is connecting the two halves. ...
- Next, remove the battery cable connector. ...
How do I resync my PS4 controller to my PS4?
To resync your PS4 controller, turn off the PlayStation. Locate the reset button and using a pin, long press it for a couple of seconds. Now, connect the controller to the console using a USB cable and then turn on the console. Press the PS button on the controller as the console powers up.
Why won't my PS4 controller sync back to my PS4?
If your PS4 controller won't connect to your PS4, there are several possible causes. A common solution is to try a different USB cable, in case the original one has failed. You can also try to reset the PS4 controller by pressing the reset button on the back of the controller, behind the L2 button.
How do you connect your PS4 controller back to your PS4 after connecting it to your phone?
2:144:03How to Connect PS4 Controller Back to PS4 After iOS Device - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we'll just hit that button to turn it on. And then with your micro usb end plug that into yourMoreSo we'll just hit that button to turn it on. And then with your micro usb end plug that into your controller. And you'll see that it'll come on saying that it's charging.
How do you connect your PS4 controller back to your PS4 after connecting it to your PC?
1:092:38How to Reset & Connect PS4 Controller to PC & PS4 Quick GuideYouTubeStart of suggested clipEnd of suggested clipButton and the share button on the front of the controller for a few seconds until the light barMoreButton and the share button on the front of the controller for a few seconds until the light bar flashes. This should make it show up as a Bluetooth device to connect to either your PC.
Why is my DualShock 4 not connecting?
Locate the small reset button on the back of the controller near the L2 shoulder button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Connect the controller to the PS4 console using a USB cable and press the PS button.
Why is my PS4 controller flashing white and not connecting?
For instance, the DualShock controller light doesn't usually flash white. There are two main reasons you might see the flashing white light on your DualShock controller: either the battery is dying, or the controller failed to connect to your PlayStation console.
How do I resync my PS4 controller without the cord?
How To Connect PS4 Controller Without A Cable. Head to your PS4 Dashboard, and go to Settings, Devices, Bluetooth Devices. You can do this via the PS4 remote or another PS4 controller. Once that's done, you should see the PS4 pad show up in the Bluetooth Devices screen, after which you should select it.
Why is my PS4 controller flashing blue and not connecting?
If you see a blinking blue light on the PS4 controller, don't worry. It means the controller is trying to pair itself with the console and has nothing to do with the dreaded blue light of death.
Why is my PS4 controller not resetting?
Hold the PS-button and Share-button simultanously for some seconds while the PS4 is turned on. This will reset all connections of the controller and searches for a new one. If this doesn't help, try different USB-cables after resetting. If that also doesnt work, your controller is probably damaged.
How do you reset a PS4 controller to factory settings?
On the back of your controller, near the L2 shoulder button, you will see a small hole. Into that small hole, insert a paper clip or a similar tool you've got. Keep the tool inserted (which will press the reset button inside) for about five seconds. Your controller is now reset and ready to be paired with your console.
PS4: pair DUALSHOCK 4 wireless controller
Turn on your PS4, connect the controller using a micro USB cable, and then press the PS button on the controller.
Computer and mobile: pair DUALSHOCK 4 wireless controller
You can use your DUALSHOCK 4 wireless controller away from your PS4. Find out more about compatible devices, applications, and feature support:
DUALSHOCK 4 wireless controller vibration settings
If your DUALSHOCK 4 wireless controller is not vibrating as expected, the controller's vibration function may be turned off. To turn it back on:
DUALSHOCK 4 wireless controller audio settings
If you have headphones plugged into the 3.5mm headphone jack on the DUALSHOCK 4 wireless controller and you hear no audio, or the audio from the headphones is very faint, make sure the headphone plug is pushed all the way in. Unplug and then firmly reinsert the headphones.
How to connect a PS4 controller to a PC?
Three common ways to connect a controller to PC are: wired connection, wireless connection, and Bluetooth connection. After that, you should pair and sync the controller on PS4.
Can you replace a PS4 controller battery?
If the PS4 controller has been used for a long time and you have tried all the above methods but failed, you should suspect that the battery may lose its charges and die. Thus, you can replace it with a new battery.
2. Unplug ribbon cables and battery
Once the two parts of the case are separated, you’ll want to 1) unplug the ribbon cable from the rear part of the case, which should allow you to set the rear plate aside, then 2) unplug the battery (you can pry the connector with your fingers or with dedicated tweezers.
3. Get the broken rumble out
Now that both faces of the plastic case are removed, you should be able to get the broken rumble motor out. iFixIt state: “With some added pressure, push down and outward in order to free and remove the rumble motors from their socket.”. That’s the gist of it.
4. Insert the new DS4 Rumble motor in its slot
Inserting the replacement motor in its slot should be easy easy enough. You might want to use some glue here to keep it in place. In my case, the replacement motor was wrapped in some sort of foam, which allowed me to easily insert it in its socket, and it was stable enough without having to glue it.
5. Solder the new cables
This time, you’ll want to solder the cables of your new motor, where the old ones used to be. Unless you have 3 hands, you’ll want a way to keep the cable in place while you hold the iron in one hand and the solder in the other.
6. Test
Put everything back together (by basically following the instructions in reverse), then test your controller. To test basic operation, you can plug in your PS4 (pro tip: do it before sc*** back everything together, just in case you messed up and have to open it up again) with a USB cable to your windows PC, and test basic joystick functionality.
How to clean a PS4 controller?
Clean your PS4 controller. Gently wipe around the crevices of the analog stick with a dry microfiber cloth. To get rid of grime, use a cotton swab dipped in a mixture of water and isopropyl alcohol. If you see dirt that you can't reach, you can use pressurized air to dislodge it.
Why does my PS4 controller drift?
Causes of PS4 Controller Drift. If your character or the camera keeps moving when you're not touching the controller , the problem's source is likely analog stick drift. PS4 controller drift can be due to one of two things: The analog stick is dirty . The analog stick or the potentiometer is damaged.
How to clean a controller input?
To deep clean the controller inputs, you must remove the outer casing and lift the battery to access the motherboard. Use a cotton swab and a mix of water and isopropyl alcohol. Do not use pressurized air on the interior parts.
What happens if you clean a controller?
The analog stick or the potentiometer is damaged. You can expect general wear-and-tear from frequent use. If cleaning the controller doesn't fix the problem, you should look into getting your controller replaced or repaired before disassembling it.
Can you open a PS4 controller if the warranty is expired?
Removing the outer casing will void the warranty on your PS4 controller, so open it up only if the warranty has expired.
How to reset PS4 controller if you don't have another controller?
Wait for your un-paired PS4 controller to go to sleep (if the lights are on) Grab a paperclip (yes, a paperclip) Use the pointy end to press the recessed ‘reset’ button on the back of the controller.
How to delete a controller on PS4?
If you have another controller that is still paired: Turn on your console with the working controller. Wait for your un-paired PS4 controller to go to sleep (if the lights are on) Go to Settings > Devices > Bluetooth devices from the PlayStation 4 menu. Select the controller you’re having issues with and hit ‘ Delete’.
What is the best thing about the PlayStation 4 controller?
There are lots of nice things about the PlayStation 4 controller. They’re all wireless for a start, which means you don’t have to sit cross-legged in front of the telly like in the good old days. They’re also rechargeable, which means you’ll never need to fumble for a battery. Also, they light up!
Can you pair a DualShock 4 with a Bluetooth device?
You can pair your DualShock 4 with other devices via the universal standard, Bluetooth. (Interestingly, the name – and symbol – for the technology is after Harald Bluetooth and his written rune, because he united the clans of Norway and Denmark, and Bluetooth unites devices.)
PS4: pair DUALSHOCK 4 wireless controller
Turn on your PS4, connect the controller using a micro USB cable and then press the PS button on the controller.
Computer and mobile: pair DUALSHOCK 4 wireless controller
You can use your DUALSHOCK 4 wireless controller away from your PS4. Find out more about compatible devices, applications and feature support:
DUALSHOCK 4 wireless controller vibration settings
If your DUALSHOCK 4 wireless controller is not vibrating as expected, the controller's vibration function may be turned off. To turn it back on:
DUALSHOCK 4 wireless controller audio settings
If you have headphones plugged into the 3.5-mm headphone jack on the DUALSHOCK 4 wireless controller and you hear no audio, or the audio from the headphones is very faint, make sure the headphone plug is pushed all the way in. Unplug and then firmly reinsert the headphones.
