Repairing Guides

how to repair electronic throttle control

by Willow Moen Published 2 years ago Updated 2 years ago
image

How To Repair an Electronic Throttle Control

  1. Install the new throttle controller gasket. Install the new gasket and fit the new throttle control in place.
  2. Install the throttle body bolts. Install the throttle body bolts by hand one at a time. ...
  3. Reinstall the electrical connector (s). ...
  4. Reinstall the air intake hose. ...
  5. Reconnect the negative battery cable. ...

Part of a video titled How To Replace A Bad Electronic Throttle On Your Car
0:36
2:53
Get a new one don't get a Rheem and the reman ones aren't that good the new ones are much betterMoreGet a new one don't get a Rheem and the reman ones aren't that good the new ones are much better then you put a new gasket. In slide the throttle assembly over it. And then bolt it back on snog.

Full Answer

Why is my electronic throttle control light flashing?

why the throttle control light comes on

  • intermittent loss of throttle control
  • sudden drop in fuel economy
  • hesitation or stumbling when accelerating
  • engine stuck in limp mode

Why does the electronic throttle control light flash?

The electronic throttle control light comes on if there is a problem with this system. When you depress the throttle pedal, the ETC receives an electrical signal and sends command actions to control the throttle’s opening and closing. When this cycle disrupts for some reasons, the ETC light on the dashboard starts flashing.

How to reset electronic throttle control manually Chrysler 300?

Steps On How To Fix Electronic Throttle Control Chrysler 300

  • Key the check engine light
  • Check the throttle position sensor. ...
  • Loosen the clamp, wiggle, and unbolt to unplug the cover.
  • Unplug the electrical connector
  • Unbolt the four bolts that throttle on and offsides the throttle assembly.
  • Place your new throttle control back inside and bolt it.
  • Reconnect the electric connector.

More items...

Why does the electronic throttle control light come on?

The electronic throttle control light comes on if there is a problem with this system. When you depress the throttle pedal, the ETC receives an electrical signal and sends command actions to control the throttle’s opening and closing. When this cycle disrupts for some reasons, the ETC light on the dashboard starts flashing.

image

How much does it cost to fix electronic throttle control?

$300 to $1,500If it's the electronic throttle controller then the replacement cost can range from $300 to $1,500 depending on the location and time to complete the job. If it's the throttle body itself that is damaged and needs to be replaced, the costs can also be in the same neighborhood.

What causes electronic throttle control problems?

The most common causes of an electronic throttle control light are a faulty throttle control sensor or a faulty throttle accelerator pedal position sensor.

How much does it cost to fix etc light?

To fix an electronic throttle control costs between $580-$700, including jeep electronic throttle control repair cost.

Is there a fuse for electronic throttle control?

The power provided to the electronic throttle actuator is regulated by the actuator relay in the underhood fuse panel. It acts as a switch, sending power to the throttle actuator when it is required.

How do I reset my electronic throttle control manually?

Resetting your electronic throttle control manually can be a tricky job. First, make sure the accelerator pedal is fully released. Next, turn the ignition on and then turn it off and wait for ten seconds. During these ten seconds, be sure the throttle valve is moving by listening for a sound of operation.

Where is the electronic throttle control sensor located?

0:559:43How To Replace and Adjust the Throttle Position Sensor - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow the throttle position sensor is usually very close to the throttle body.MoreNow the throttle position sensor is usually very close to the throttle body.

Can I replace throttle body myself?

If a scan tool is not needed then it could be done right at the location. If you have the proper mechanical skill set you can replace your throttle position sensor yourself.

What do I do if my electronic throttle control light comes on?

solution: stop driving your vehicle and have it towed to your mechanic. there, the first step will be to scan the engine computer for a trouble code. this should point your mechanic in the right direction. if there is no code, then a check of the sensors, relays, and wiring in the system should identify the problem.

How do I clear my EPC light?

If you want to fix the EPC light yourself, you can try the following: first, start the car normally. Then, start the car for the second time and push the gas pedal to the floor when the engine starts. In some cases, this works. It is also a good idea to check the electrical connections on the throttle body.

How do you reset a throttle position sensor?

The easiest way to reset your throttle position sensor is to unhook the negative cable from your battery for up to five minutes or to remove the fuse for your engine control module.

What happens if you dont reset throttle body?

If the TPS is causing your ECM to think that the throttle is closed when it isn't, it'll reduce the amount of fuel in the air/fuel mixture and cause the engine to run lean. Without enough fuel in the mixture, the engine will fail to make as much power as it normally does.

What is Haz fuse?

HAZ-HORN 15 A: Emergency flashers, horns. RTR 30 A: Retractable headlight system.

What does it mean when it says service electronic throttle control?

What It Means. Electronic Throttle Control (ETC) Warning Light. This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected while the vehicle is running, the light will either stay on or flash depending on the nature of the problem.

How do I know if my electronic throttle body is bad?

7 Symptoms of a Bad or Failing Throttle BodyLack of Power. ... Issues while accelerating. ... Higher or Lower Idling. ... Dirt or Grime Build-up. ... Poor Mileage. ... Electrical Problems. ... Check Engine Light.

How is electronic throttle control diagnosed?

0:083:30Electronic Throttle Control System Diagnosis- Diagnostic Quick TipsYouTubeStart of suggested clipEnd of suggested clipSo we go into the fuel injection system and we go to the throttle control system. I already haveMoreSo we go into the fuel injection system and we go to the throttle control system. I already have this hooked up to the throttle position sensor. So we'll do a DC voltage test on that.

Can a throttle controller damage your engine?

Like any good thing, a throttle controller can be misused and can be harmful to your engine. Imagine pressing the gas pedal as far as you can each time you drive. Some will push their vehicles to the point that they are damaging components. Just like an airplane, you can have a skilled pilot but still damage a plane.

What happens if throttle body fails?

if the throttle body fails, you will see the engine having worse idling system. The electronic throttle body is controlled by the computer engine of the vehicle in modern cars. So, if the throttle body fails then, the computer engine controls it and interrupts from moving the valve and, consequently, helps to save the whole engine ...

What is the purpose of the throttle body valve?

This valve does the main task in an electronic throttle body. This valve opens up as much needed and lets the air goes in and helps to create pressure in the engine. So, the throttle body has a direct connection to create the proper pressure in the engine and give you the perfect mileage.

What happens after replacing throttle control?

After replacing the throttle control, you will see no more poor type idling of the engine. The idling system will be rich and fast enough. After replacing a new throttle body, you won’t get any throttle failure signs. But it’s better to reset all the fault codes and your dash warning lights. 4.

How does a throttle body work?

The throttle body works by getting a sensor from the accelerator paddle. Sometimes, any leak in the electric connection to the throttle body makes it a failure and can’t get the air in letting amount sensor

Why is throttle body important?

When the throttle body gets any problem, it reduces the power in letting to the engine to avoid engine issues. The throttle body itself is made such that it will decrease the power pressure itself mainly to save the engine from having any significant damage.

What does it mean when throttle body is less power?

Less Power or Reduced Power Sign on the Dash. If the throttle body has any problems, then you will feel less power in driving. You may see the power reduced alert on the power gauge of your vehicle. In that case, it’s the throttle body that needs to fix.

Why is ETC important?

ETC (Electronic Throttle Control) is very much important in any car engine to ensure the proper air pressure. If anyhow this system gets disturbance, then you will be going to face various hindrances in driving. So, it is very crucial to fix the Electronic Throttle system immediately after facing the problems. ...

What is the throttle body valve?

The typical electronic throttle control system usually consists of three main parts – the first is the accelerator pedal module, a throttle body valve that needs to be controlled by an electric motor to determine the opening and closing times, and a powertrain or engine control module . The powertrain or engine control module is a type ...

What is electronic throttle control?

What is the electronic throttle control? The electronic throttle control is an automobile technology that is in charge of connecting the accelerator pedal to the throttle, the mechanism by which fluid flow is managed by constriction , and is in charge of replacing a mechanical connection between two parts in the system.

What does it mean when your throttle control stalls?

This means that your car will display uneven data or it will display data that does not make sense for the current situation. Furthermore, if your car stalls without any apparent reason, then this is a clear sign that you need to determine how much you are going to pay for an electronic throttle control repair cost.

How much does a 2005 Toyota Camry cost?

The fifth least expensive option is the 2005 Toyota Camry, with the total list price coming out to nearly $300 at $294 on average. The labor time is just over 1 hour, with the independent shop labor price coming to $110 and the dealership estimate for the labor coming to around $143.

How to fix service electronic throttle control

Resetting or servicing your electronic throttle control can be carried out with these two methods, they include;

What is electronic throttle control?

You can think of the Electronic Throttle Control (ETC) as a vehicle technology that has the core function of electronically connecting the gas pedal to the throttle. It also carries out restoring/maintaining the mechanical link within its components and the vehicle engine.

How do I know if my electronic throttle control is bad?

The performance of the ETC can either have a positive or negative impact on the engine and overall vehicle performance. Any of the following can be considered as a possible symptom:

How does an electric throttle control system work?

As oppose to old vehicles, almost all modern vehicles have an electric throttle control system, so applying pressure on the gas pedal transmits a signal to the ECM. The ECM uses the signal’s information to transmit a control signal to the electric motor placed on the throttle body that changes the valve’s position accordingly.

What is the gas pedal?

The gas pedal controls the job of your throttle control. In old vehicles, the gas pedal is connected by a cable that links it to the engine and is joined to a linkage fixed to the carburetor or throttle body. But for vehicles with ETC, when you apply pressure on your accelerator pedal, the throttle cable forces the mechanical linkage inward, ...

What is an ETC?

An Electronic Throttle Control (ETC) is a technology for automobile vehicles, which connects the gas pedal to your throttle electronically, restoring the mechanical link.

How to reset throttle control?

Turn off your radio, heater, rear window defogger, and air conditioner to prevent overloading your engine, which will negatively affect your throttle plate’s position. Then ensure that our front wheels are in the neutral position, facing straight. After this, you can now reset your throttle control.

Why does my throttle smell?

When your throttle control is damaged, it can lead to high fuel consumption, which might be due to a miscommunication linkage between your throttle controller and the engine’s air-fuel mixture, which is controlled by your airflow sensor. You might perceive a gas smell if there is a leakage from the damage.

Why don't drivers know the throttle system?

Most drivers overlook the throttle system’s significance in their vehicles , and they pay less attention to the system. So when their vehicle begins to exhibit symptoms of a failing throttle system, a lot of them might not know because they don’t know the function of their electronic throttle control light indicator, leaving the fault to build up until the vehicle break down or even lead to dangerous situations.

Why is my throttle pedal not working?

This can be due to a faulty sensor, or relay; this will cause the throttle controller to be unable to receive signals and give out intermittent throttle control. Sometimes, this can cause your vehicle’s engine to knock down, or you will not be able to control the throttle pedal.

What is electronic throttle control?

Electronic. With electronic throttle control, instead of a cable, the pedal is connected to a position sensor. When you press the gas pedal, its position is shared with the ECM, which uses it to open the throttle as efficiently as possible.

What happens if your TPS calls it quits?

If your TPS decides to call it quits, you’ll likely experience random idle surges. Alongside sporadic idling, you may also notice your engine misfiring, a rough idle, or stalling. It’s also possible that your car idles too high or too low.

What happens if throttle controller goes bad?

If your electronic throttle controller goes bad, then do not be the one that waits to take care of it. Not only will your engine suffer in terms of performance, but it also poses a potential safety concern due to random acceleration issues. So fix it immediately!

What are the two types of throttle control systems?

There are two main types of throttle control systems – cable, which is the older of the two, and electronic.

Why does my ETC throttle body act up?

There are many reasons an ETC might act up. However, the most likely issue is that it’s dirty. Thankfully, cleaning an electronic throttle body is pretty simple. If it has failed completely, though, you may need to replace the throttle body entirely.

Why is there a check engine light on my car?

Your engine is designed to run as efficiently as possible. For this reason, if something isn’t working correctly, it can throw the entire system out of balance. Thankfully, this is the exact purpose of the “check engine” light.

Who is Josh Barrett?

Joshua Barrett. Josh Barrett is a writer hailing from the great state of Alaska. While describing himself in the third person is not his forte, writing about any and all things automotive – is. After 13+ years hustling in the exciting world of car sales, he took off to travel the world with his dog Teemo.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9