- Clean the damaged area
- Create a v-groove line for the PlasticFix to apply
- Fill the PlastiFix
- Repeat step 3 for the opposite side
- Remove any excess PlastiFix
- Mix and apply epoxy filler to the repair area
- Apply a high build flexible primer surface and allow time for it to dry
Can you repair a broken fairing on a motorbike?
Motorcycle fairings are often discarded because of small cracks in the motorbike fairing. Replacement fairings may not be available or they may be too expensive. We will recreate the missing piece on this side so that it matches the piece on the opposite side. Clean the damaged area.
How do you use plastifix on fairings?
Apply aluminum body tape to the backside and use a body spreader to get a good seal of the tape to the plastic fairing. Use a body spreader to help put a small bend on the edge of the tape. This will help keep the PlastiFix contained. Sprinkle a layer of the PlastiFix powder onto the tape and the repair area.
How to paint a motorcycle fairing?
With 320 grit sandpaper, sand the primer until the entire part has a smooth finish that is ready for a topcoat. Apply the topcoat according to the paint manufacturer’s recommendation. That’s it and you’re done. Your original motorcycle fairings are often discarded because of the broken tabs and bolt holes.
How do you use fiberglass tape to repair drywall?
We are going to create additional strength to the repair with fibreglass tape. Cut a piece of fiberglass drywall tape that will fit the repair area, and press the tape into place. Just as was done on the opposite side, layer the powder and liquid until the desired thickness is achieved.
How do you fix a cracked motorcycle fairing?
0:504:39Repair cracked and broken motorcycle fairing with PlastiFixYouTubeStart of suggested clipEnd of suggested clipUse a rotary tool with a teardrop-shaped cutting bin and grind about half way through the plasticMoreUse a rotary tool with a teardrop-shaped cutting bin and grind about half way through the plastic along the crack line be sure to round off any sharp. Edges.
How do you fix a crack in a fiberglass motorcycle fender?
1:122:52How to repair Honda NSR250 motorcycle cracked fender - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn bonds the two pieces together pretty much instantly. So. And it's you know opposed to be aMoreIn bonds the two pieces together pretty much instantly. So. And it's you know opposed to be a stronger bond than your typical super glues and all that other stuff I've been looking at plastic bonding.
How do you make fiberglass motorcycle fairings?
14:2318:31HOW TO: (Screw Up) and Make a Fiberglass Fairing - YouTubeYouTubeStart of suggested clipEnd of suggested clipItself on the outside instead of making a separate fairing that will pop off and then get glued onMoreItself on the outside instead of making a separate fairing that will pop off and then get glued on this is just getting fiberglass.
How do you fix a scratch on a fairing motorcycle?
Procedure:Step one: Removal of the fairing. ... Step two: Clean with soapy water. ... Step three: Apply polishing product. ... Step four: Sanding the scratched area. ... Step five: Second wash. ... Step six: Apply plastic adhesion. ... Step seven: Apply polishing compound. ... Step eight: Painting.More items...•
How do you repair a cracked fairing?
3:137:44How to repair cracked or broken fairings under $15. - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a popsicle stick to apply it or you can even use a little piece of cardboard. That's alreadyMoreUse a popsicle stick to apply it or you can even use a little piece of cardboard. That's already stuck. Once you do that apply a nice even coat I'm sure you guys can do better than me on this one.
How do you repair a fiberglass motorcycle?
2:1315:0110 Easy Steps to Fix your Fiberglass Race Fairings on your Bike - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use the glazing putty the glazing putty will be the final touch. Before you apply yourMoreYou can use the glazing putty the glazing putty will be the final touch. Before you apply your primer.
How do you repair fiberglass?
Here's how.Drill a tiny hole at each end of the crack. This will stop the crack from extending any further.Examine the crack. ... Wipe the crack with a dry rag to make sure it's clean and dry. ... Fill the crack with a fair amount of fiberglass epoxy resin, using a plastic applicator. ... Let the epoxy dry for a day.
What are motorcycle fairings made out of?
Fairings are made from a variety of materials, including fiberglass, aluminum, carbon fiber, and polymers.
How do you make fiberglass parts?
7:089:08How To Make Fiberglass Part - Part 1 - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a mat roller greatly helps lay the mat down and remove bubbles. Apply several layers to giveMoreUsing a mat roller greatly helps lay the mat down and remove bubbles. Apply several layers to give the mold the necessary rigidity three to six layers will be adequate for this mold.
Can you fix scratched fairings?
You can attempt to buff them out with various compounds or you can try a DIY quick fix by painting over it with nail polish. But the best way is to take the fairing off and completely repaint it. It really comes down to how much time and effort you want to put into getting rid of the scratch or scratches.
Why does toothpaste remove scratches?
Paste-based toothpaste acts as a mild abrasive that levels out the scratch, removing it or making it less noticeable.
How do you remove deep scratches from motorcycle plastic?
0:003:24removing small scratches in motorbike plastics, cheaply and easily.YouTubeStart of suggested clipEnd of suggested clipFirst you make sure there's no stickers over those they'll peel off also polishes up your plastic.MoreFirst you make sure there's no stickers over those they'll peel off also polishes up your plastic. Get some fine sandpaper. But not to fight others it doesn't do anything just get off all the grunge.
How do you fix a crack in a fiberglass fender?
2:2720:44How to Fix | Repair Cracked Fiberglass Auto Body PanelsYouTubeStart of suggested clipEnd of suggested clipAnd start applying those pieces. The next step is to apply the fiberglass resin. And cloth and it'sMoreAnd start applying those pieces. The next step is to apply the fiberglass resin. And cloth and it's good to wear gloves. And a mask.
How do you repair plastic motorcycle fenders?
2:285:40how to repair motorcycle plastic fairings with a product called plast-aidYouTubeStart of suggested clipEnd of suggested clipIt rest on the crack. And then dragging it along and letting its natural stringiness let it stickMoreIt rest on the crack. And then dragging it along and letting its natural stringiness let it stick drag. It out let it stick drag. It out and then you can literally just Pat it down over the crack.
How do you reinforce fiberglass fenders?
0:2126:21How to Fix Widebody Fiberglass Fenders to Perfection | WideFox BuildYouTubeStart of suggested clipEnd of suggested clipI cut up the front fenders and kind of show you how I was going to fix them with some strapping someMoreI cut up the front fenders and kind of show you how I was going to fix them with some strapping some screws in that just to temporary hold it and today we're gonna finally get back to the fenders.
Can you repair fiberglass?
1:177:00How to Repair Fiberglass - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt is not enough to just squirt some glue on it the damaged fibers must be completely replaced sinceMoreIt is not enough to just squirt some glue on it the damaged fibers must be completely replaced since the gelcoat is also damaged we will repair the entire piece all the way through.
How to keep Plastifix from running off of tape?
This will help keep the PlastiFix contained. 2. Sprinkle a layer of powder onto the tape and the repair area . It helps to get the piece as horizontal as possible to keep the powder from running off of the area.
How to soften molding bar?
Drop the molding bar into boiling water. Or heat the water in a microwave, it takes just a few minutes. Allow enough time for the heat to soften the molding bar all the way through. Remove the molding bar from the boiling water and it will be liable for a short time.
How to apply a high build flexible primer?
Apply a high build flexible primer surface and allow time for it to dry. With 320 grit sandpaper, sand the primer until the entire part has a smooth finish that is ready for a topcoat. Apply the topcoat according to the paint manufacturer’s recommendation. That’s it and you’re done.
How to crack a plastifix?
Fill the PlastiFix. Squeeze two or three drops of liquid into the powder, then use the tip of the needle to stab the ball of liquid and powder. The hole of the needle is on the side of the needle, not at the tip. When you transfer the ball of liquid and powder to the crack, give the bottle another squeeze.
How to clean a soiled surface?
Clean the damaged area. Do your best to remove these contaminants by using the Super Clean, which is a mild solvent based cleaner. Use the clean cloth or paper towel to wipe the damaged area in one direction, in order to avoid re-contaminating the surface. 2.
Can you hook up fairings without tabs?
Repair the broken tabs on fairings. Your original motorcycle fairings are often discarded because of the broken tabs and bolt holes. You just can’t hook them on the bike frame without tabs. Well, by using the PlastiFix, you could copy an existing tab with the molding bar and recreate the missing tab there.
How to keep Plastifix from running off of tape?
Use a body spreader to help put a small bend on the edge of the tape. This will help keep the PlastiFix contained. Sprinkle a layer of the PlastiFix powder onto the tape and the repair area. It may help to get the piece as horizontal as possible to keep the powder from running off of the area.
How to reshape plastifix?
Use die grinders and sanders to reshape the plastifix to the proper shape. Tape a piece of paper to the undamaged piece and use a pencil or a crayon to get a rubbing of the shape. Cut the shape out of the paper and flip the paper over. This is the contour that we need to transfer to the damaged part.
Why are fairings discarded?
Motorcycle fairings are often discarded because of small cracks in the motorbike fairing. Replacement fairings may not be available or they may be too expensive. We will recreate the missing piece on this side so that it matches the piece on the opposite side. Clean the damaged area.