- Get rid of the duct tape from the pole and sand the edges of the pole to get a smooth surface.
- Place the full pole of the tent on the floor and start to untie the knot on the end that is closer to the section that is to be replaced. ...
- Hold the shock cord and remove the pole sections carefully until you reach the broken part that is to be replaced.
- Remove the damaged section and replace it with the section that you prepared.
- As you still hold onto the shock cord, re-stretch it through the pole sections that you had removed temporarily. ...
- Tie a knot at the end of the cord and make sure that it is taught just as you had found it. ...
How to fix a broken tent pole?
A tent pole repair sleeve is one of the quickest repair methods that can be used to fix broken poles. It’s also an easy process for any person, even kids! All you need are some tools and your handy-dandy tent splint (or short pole).
What are fiberglass tent pole replacement parts used for?
Take a look at the process of fixing a broken fiberglass tent pole and what are fiberglass tent pole replacement parts that you will use. The fiberglass poles that are used to support tents are usually made of loose pole sections that are held together by an elastic cord.
How do I replace the shockcord on my tent pole?
Here’s how to replace the shockcord: Start by laying the tent pole out straight. To avoid mixing up sections, you can label them with a permanent marker (use masking tape if you don’t want to write directly on the pole.)
How do you fix a broken pole on a pole saw?
If your pole breaks you can use a stake to connect the two broken parts together. First, line up the broken pole sections. If each is bent straight it with pliers. Now take the stake and align it next to the broken part, it must be centered by the broken parts.
How do you fix a splintered tent pole?
0:184:55How to repair a broken tent pole - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a spare but replacement Palmeri threading all the shock cord. So first of all we need a brokenMoreUsing a spare but replacement Palmeri threading all the shock cord. So first of all we need a broken tent pole. Oh. My god here's one I broke earlier. So you can see there.
Can tent poles be repaired?
The easiest and quickest way to fix a broken pole is with a pole repair sleeve. Also called a splint, this short tube is often provided with your tent. If not, buy one and pack it with you. A good pole repair sleeve is just slightly larger in diameter than your pole so that it doesn't move around too much.
Can I cut a Fibreglass tent pole?
When cutting the section to length, always cut towards the centre to avoid splintering the edge when you cut through. Cut part way through the pole, then turn it and cut part way. Repeat until you cut right through. Once you've cut all the replacement sections for one pole, fit them before moving on to the next pole.
What is a tent pole repair sleeve?
0:031:13How to Use a Pole Repair Sleeve | NEMO - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut by any sharp metal points if if they do happen to occur during that break. You're gonna slideMoreCut by any sharp metal points if if they do happen to occur during that break. You're gonna slide that pole repair splint right over the damaged area Center that damage in the splint.
Can you fix a tent pole with duct tape?
Use a multitool to cut the can and wrap the metal around the break in the tent pole. This will add some strength to your temporary repair—just add duct tape, and voila.
How do you use a tent pole splint?
0:140:58How to use your repair splint - YouTubeYouTubeStart of suggested clipEnd of suggested clipStep one to properly use your pole splint. Simply slide the splint over the broken pole segment.MoreStep one to properly use your pole splint. Simply slide the splint over the broken pole segment.
How do you cut a Fibreglass pole?
Put on your safety glasses. Place one hand on the fiberglass stick, close to the pencil mark you placed on the masking tape in Step 3. Align the back edge of the fine-toothed hacksaw blade with the pencil mark. Slowly pull the hacksaw toward you and then away from you to cut into the fiberglass stick.
What can I use to replace tent pole?
0:093:56How To Repair A Broken Tent Pole Section - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you simply need to measure mark. And cut the pole down with a hacksaw. And then with a sandpaperMoreSo you simply need to measure mark. And cut the pole down with a hacksaw. And then with a sandpaper just remove any sharp edges this will prevent them from damaging the elastic in your pole sections.
How do you fix a broken swag pole?
4:297:43How to Repair a Broken Tent Pole - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis I like to put a bit of tape on the end of the elastic sort of just to harden up the end forMoreThis I like to put a bit of tape on the end of the elastic sort of just to harden up the end for threading through sort of like a shoelace. End just roll that along.
What is a tentpole picture?
: a big-budget movie whose earnings are expected to compensate the studio for its less profitable movies.
How do you fix a bent aluminum tent pole?
The only way to soften the aluminum is to anneal it, which involves heating the aluminum almost to it's melting point and then letting it cool slowly, but if you try to do that then your pole will be so soft that it won't flex, it'll just bend like welding wire.
How do I fix my Coleman tent pole?
0:394:04How To Repair a Tent Pole - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe main thing is shock cord if you've got the shot cord that's the same length as your tent poleMoreThe main thing is shock cord if you've got the shot cord that's the same length as your tent pole you're gonna be alright just get some shock cord by the foot.
How do you fix a telescopic pole?
0:191:08Twist Lock Pole - How to fix locking system - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust need to push that clip. Off. Open it up as wide as you can. Put it back on again the same wayMoreJust need to push that clip. Off. Open it up as wide as you can. Put it back on again the same way it came off. And then just get the outer one and slot it back on.
How do you fix a broken swag pole?
4:297:43How to Repair a Broken Tent Pole - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis I like to put a bit of tape on the end of the elastic sort of just to harden up the end forMoreThis I like to put a bit of tape on the end of the elastic sort of just to harden up the end for threading through sort of like a shoelace. End just roll that along.
The Process – How To Repair Broken Fiberglass Tent Pole
As you read above, the fiberglass poles that are used to support tents usually come with an elastic cord. This shock cord runs through its length and is knotted at both ends so it can be tightly secured inside your tent without needing any complicated mechanisms or tools!
Use a Pole Repair Sleeve
A tent pole repair sleeve is one of the quickest repair methods that can be used to fix broken poles. It’s also an easy process for any person, even kids! All you need are some tools and your handy-dandy tent splint (or short pole).
Use a Tent Stake
With a little ingenuity and creativity, you can use any stake or pole to hold your tent up. You’ll want one for each side of course since they’re not very strong on their own but with these handy devices all set in place it should be enough until help arrives!
How Do you Replace a Shock Cord?
Have you noticed any cracks in your shock cords or does it not stretch anymore? Replace it if these problems occur.
Save the Money
How to Repair broken fiberglass tent pole, it is easy if you have the right tools. With my advice, repairing this type of damage will not take up much time and energy while still being effective!
How to tie a shock cord?
Tie a knot in one end of the shockcord, then feed the other end through all but the last pole section. Stretch the shockcord to extend its length, then tie a temporary knot to keep it from slipping back inside the second-to-last pole section; alternatively, you can use a pair of locking pliers to hold the cord.
How to replace shockcord on tent pole?
Fortunately, replacing it is a straightforward process. Here’s what you’ll need: Here’s how to replace the shockcord: Start by laying the tent pole out straight. To avoid mixing up sections, you can label them with a permanent marker (use masking tape if you don’t want to write directly on the pole.)
How to fix a broken tent pole?
Using a repair sleeve to fix a broken tent pole is simple: Line up the broken pole sections. If the pole is bent but not fully broken, gently straighten out the bend. Slide the sleeve over the pole end until it’s centered over the break or kink; you might have to use pliers to crimp or a rock to bend splayed pieces so that ...
What to do if a tent pole gets stepped on?
Whether your tent pole gets stepped on or a powerful gust of wind does the damage, a kinked, split or snapped pole needs immediate attention in the field (when you get home, you can look into having the pole replaced or professionally repaired.) You have two options: Use a pole repair sleeve. Use a tent stake as a splint.
What is a splint for a tent pole?
Also called a splint, this short tube is often provided with your tent. If not, buy one and pack it with you. A good pole repair sleeve is just slightly larger in diameter than your pole so that it doesn’t move around too much. Using a repair sleeve to fix a broken tent pole is simple: Line up the broken pole sections.
How to label tent poles?
Start by laying the tent pole out straight. To avoid mixing up sections, you can label them with a permanent marker (use masking tape if you don’t want to write directly on the pole.)
What to do if you forgot your pole repair sleeve?
If you’ve lost or forgotten your pole repair sleeve, you can use a tent stake to concoct a crude splint:
