Joe Repairs - How do I fix that?
- Broken Thumbs, Crotches and Other Body Parts: If you have the plastic piece that broke off, you can carefully super glue it back on. ...
- Missing or Worn Paint: Most collectors would rather this be left alone. ...
- Yellowing and Discoloration: The white plastic of figures such as Storm Shadow v1 and Snow Job v1 will often turn yellow over time. ...
Full Answer
How to use the O-ring on a Joe?
Why are old Joes better than Kenner?
How do you fix old GI Joe figures?
2:4219:44DIY Repair Guide: How to Fix Vintage GI Joe Figures! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the last thing you're gonna use is I use one of these guys now if you want to get a little fancyMoreAnd the last thing you're gonna use is I use one of these guys now if you want to get a little fancy.
How do you reattach GI Joe?
Replace that O-RingFirst, make a supply run. Walk into Ace Hardware and ask for a pack of #9 rubber O-Rings and you've got your start. ... Second, take the screw out of the Joe's back. The O-Ring went around a peg in the center of a Joe, then looped down to hold on the hips and legs. ... Lastly, put it all back together.
How do you repair a plastic action figure?
0:091:09How to Repair a Plastic Toy - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight a thin layer with the activator on both surfaces to be bonded. Allow a few seconds for theMoreRight a thin layer with the activator on both surfaces to be bonded. Allow a few seconds for the activator to dry off. Now apply a small amount of glue onto one of the surfaces to be bonded.
How do you fix a broken action figure?
4:2423:50How to Fix Broken Joints (Fixing My Subscribers figures Ep. 3) - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm just gonna put a little bit of superglue. Remember a little bit does go a long way so let's justMoreI'm just gonna put a little bit of superglue. Remember a little bit does go a long way so let's just with the precision tip. Just when I get it in there.
What size O-ring do you need to fix a GI Joe?
This "style 2" o-ring is recommended for vintage GI JOE figures years 1985 and beyond. Also works with Lanard's Corps!, Bronze Bombers, and many other 3 3/4" action figure lines of similar construction. (Actual dimensions: 7/16" ID, 5/8" OD, 3/32" thickness).
What is GI Joe O-ring?
0:128:43New GI Joe O-Rings! I Love Them, But They Dont Love Me... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd 90s the o-ring gi joe figures were some of my favorite toys growing up while i was never a hugeMoreAnd 90s the o-ring gi joe figures were some of my favorite toys growing up while i was never a huge fan of the cartoon. I definitely had plenty of the action figures and vehicles.
What is the best glue for action figures?
Gorilla glue is by far the best most excellent glue that I've ever used! It's so strong, and the instant hold is superior over any other glue. I can easily repair anything with gorilla glue, and it's a must have in our household. I highly recommend gorilla glue."
What glue works best on plastic toys?
Loctite Super Glue All Plastics is specially formulated to repair plastic, turning tears into smiles in seconds. Loctite Super Glue All Plastics even works on hard-to-bond plastics such as Polyethylene, delivering lightening fast strength and precision.
What kind of glue works on plastic toys?
Plastics are the hardest materials to bond and require special adhesives, but repairing your child's favorite plastic toy can make you a hero. Use Loctite® super glues or epoxies to bring back the smiles.
How do you fix a broken action figure peg?
5:4412:44NECA Broken Peg Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right the pilot hole thing didn't really work out so what I did was I took the drill and drillMoreAll right the pilot hole thing didn't really work out so what I did was I took the drill and drill down all the way through. And step the stuck the screw in there.
How do you fix a broken peg on a figure?
3:486:52Anime Figure Broken Peg Quick Fix | Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's not permanent. So if it's ever snaps I can replace it or. If I provide a clear plastic rod. IMoreIt's not permanent. So if it's ever snaps I can replace it or. If I provide a clear plastic rod. I can replace that or painted black to match this other piece if.
How do you glue an action figure?
12:1736:48How I Repair Action Figures (The action figure repair video) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we're gonna brush some super glue on there. I'm gonna twist it so this stuff will not freeze yourMoreSo we're gonna brush some super glue on there. I'm gonna twist it so this stuff will not freeze your joints because it's really thick. It takes a while for it to work right. So once you brush them.
How do I fix loose legs in GI Joe?
0:552:18How to fix loose legs on modern gi joes - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what I did was I took some Loctite superglue. You could use any brand I like the nozzle on theseMoreSo what I did was I took some Loctite superglue. You could use any brand I like the nozzle on these I just applied it on here. This leg is now very stiff and it's good it'll be great for animation.
How do you fix a GI Joe rubber band?
2:003:46How to replace a GI Joe O-Ring (Rubber Band) - SEO Toy ReviewYouTubeStart of suggested clipEnd of suggested clipI do the back the back has this big post there the rubberband hooks on two I always kind of do itMoreI do the back the back has this big post there the rubberband hooks on two I always kind of do it like this and then pull and I flex it back until it stays open like that.
Step 1: Get O Ring
Get 3” 3/4 O Ring replacement because your figure fell apart because the ring broke. I ordered mine from Amazon.
Step 2: Unscrew Back
Find all 3 figure parts - the upper body, legs, and pelvis. Use a small philips head screwdriver that will fit the screw in the back of the figure’s torso and not strip it. Loosen the screw all the way.
Step 3: Take Off Back
Once you have removed the screw, VERY carefully lift the back panel straight up and not at an angle or you might break the pegs inside. The limbs and head may slip out of their slot but that is OK and we will put it back later.
Step 4: Remove Old O Ring
Take off old O ring, Your o ring is probably broken because it snapped as the plastic dried out from old age.
Step 7: Slide O Ring Through Pelvis
Gently slide the O ring through the center of the pelvis. Be careful not to use too much force or you will snap the crotch piece.
Step 8: Attach Legs and Pelvis to the Upper Body
Put the top of the O ring around where the screw was in the torso. Double check that you have the feet facing in the correct direction so that you do not end up with the butt facing the wrong way.
Step 9: Put Back Head and Arms
Put the arms and legs back in the slots but be sure the right vs left arms are on the correct sides.
How to use the O-ring on a Joe?
The O-Ring went around a peg in the center of a Joe, then looped down to hold on the hips and legs. To get at that, you need to open up that Joe, which is often harder than it sounds. Good boys and girls played with their Joes in harsh conditions, meaning the screw might be rusty. Lastly, put it all back together.
Why are old Joes better than Kenner?
The wonderful thing about old Joes (and the reason they were better than Kenner’s similarly-sized Star Wars active figures) were there many points of articulation. The O-Ring was a huge part of that, as it allowed total movement in the hips.
