how to repair hardwood floor water damage

How to Repair Water Damaged Wood Floors

1. Remove Water. If there is any liquid on the floor, mop it up and soak it up. If you have a water vacuum, you can...
2. Clean the Floor. Use a disinfectant that is suitable for wood to remove any debris that may have accumulated in the...
3. Dry the Floor. When you’re done cleaning the wood and pat-drying it, you may let the air...

Full Answer

How to minimize water damage to your wood floor?

Required Items

• Stiff Brush
• Shop Vacuum
• Squeegee & Absorbent Cloth
• Mild detergent & Disinfectant
• TSP (trisodium phosphate for mold)
• Bucket & Rubber gloves
• Fans or Carpet Criers

How can I protect my hardwood floors from water damage?

• Lifting up or actual pull up from the sub-floor can be a green-light for buckling damage.
• Puffed-up areas on the floor or crowning, especially in moisture damage areas.
• Wood floor cupping or when boards turn up on the edges.
• Gap and cracks between hardwood planks.

How to repair hardwood floor water damage step by step?

Step #1. Identify the Source of the Water. It is crucial to find out the original source of water before replacing the water damaged flooring. Once you identify the source, take some steps to resolve the source of water that is damaging your hardwood floor.

How to repair water damaged wood in 7 simple steps?

• Start to swell up from moisture and deform in structure/shape.
• The edges will start to swell up the most and with time will start to crumble and fall apart.
• Waterlogged Particle board can start to sag under the weight which can be extremely unsafe.

More items...

How do you fix a buckled hardwood floor with water damage?

As mentioned, weather and moisture are the most culprits of buckling wood floors. If the buckling is minimal, you can try drying the damaged area and see if it returns to its normal shape. You can also try putting a little pressure or a heavy object on top of the buckled wood to settle it back to its place.

Can cupped hardwood floors be repaired?

To truly fix it, you must get to the source of the water damage. Once you've addressed that, you can try to get your wood floors back to their original beautiful state. For minor cupping, the fix might be as simple as returning the room to its normal humidity levels with a dehumidifier.

Will cupped hardwood floors from moisture flatten?

In some cases, if the cupping was not severe the flooring may flatten to an acceptable level with minor gapping after drying. Remember the flooring has lost moisture so some shrinkage will result. Before any repair or remediation the flooring should be checked for looseness.

What does hardwood floor water damage look like?

Staining: Staining is simply the discoloration on the hardwood floors, due to water damage. Staining comes in two forms, white stains and black stains. White stains come in the form of white circles on your hardwood floors. They indicate that the floor's finish has been mildly damaged, due to the build-up of moisture.

How do you fix a swollen wood floor?

If the floor is swollen from humidity, then you must set up ventilation fans to dry out the room. To speed up the process, a dehumidifier may also be set up in the room to help dry out the flooring and capture the moisture.

What does cupping look like on hardwood floors?

The simplest way to think of wood floor cupping is to imagine the edges of each plank sticking up higher than the centers. It ends up looking a little like an accordion. If you imagine a picture of a child drawing a boat in the water, then the water will give you a good idea of what a cupped floor looks like.

How do you dry cupped wood floors?

To dry out cupped hardwood floors, start by vacuuming up visible water and running industrial fans in the room. Once the area has begun to dry, bring in a dehumidifier to remove any excess moisture stuck in the wood's pores. Finally, use a moisture meter to check the area is completely dry.

How long does it take hardwood floors to dry after flood?

Drying the hardwood floor (patience is key) It may also be necessary to access the floor from below for faster drying. Effective drying of a hardwood floor is a slow process. It will sometimes take seven to 10 days for the floor to release enough water to halt the forced drying process.

How do you fix cupped wood?

0:305:16Cupping And Wood - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd there's different ways depending on how severe the cupping is that you can manage this you knowMoreAnd there's different ways depending on how severe the cupping is that you can manage this you know one one way is to actually cut the board in half rejoin the edges glued back together another.

Can wet hardwood floors be saved?

If you remove the water from your hardwood floors quickly and properly dry them, you may be able to save the wood (or most of it). Most likely, you will need to sand and refinish the wood afterwards, and then your floors will look (almost) brand new.

Can you fix water-damaged wood?

To fix watermarks or stains on wood, you should have applied marine-grade polyurethane to the wooden furniture in the first place. But, you can still remove watermarks through some other alternative methods.

Will warped wood floor go back to normal?

Cupped flooring looks bad but it's almost always reversible. It can usually be corrected by simply restoring proper humidity inside the room, which will help balance out the moisture above and below the flooring.

An Ounce of Prevention Is Cheaper Than The Cost of Repairing Your Wood Floor

The first thing to mention is that your wood floor’s polyurethane coating is specifically intended to keep water and dirt from ever touching the wo...

How Can I Tell If I Have Water Damage on My Wood Floors?

The damaging effect of water on wood builds over time. By the time you notice a change in your wood floor, the water has already hurt the floor. On...

Where Did The Water Come from?

Before you try to repair the damage, the first question to ask is “where did the water come from?” An occasional spill won’t cause mold to form or...

The Type of Wood Flooring You Have Affects The Repair Options Available

As suggested in the Wood Flooring 101 section of our website, the type of wood flooring you have limits the range of possible repairs for your wood...

Sanding and Refinishing Water Damaged Flooring

Water-damaged boards that suffer from mild cupping or simple surface staining can be sanded down in the field, re-stained and re-coated. While this...

Replacing Damaged Flooring by Weaving in New Planks

For many water-damaged wood floors, the best way to repair the damage is to eliminate and replace the affected boards and then to refinish the enti...

What happens when wood is exposed to water?

When your hardwood flooring is exposed to water, it will lead to multiple unpleasant changes in the wood. The wood planks may lose their natural look or get damaged entirely.

Why does my wood floor look humpy?

If your wood floor is damaged with water, you may observe cupping of single planks or crowning of multiple planks, making them look hump. When the floor wood absorbs water, it expands. This expansion can make the whole plank or various planks buckling.

What causes wood planks to rust?

Water accumulation beneath wood planks results in mold growth. This mold combines with the tannins in woodturning color, resulting in staining. Tannins react when they come in contact with the water minerals. It leads to wood staining, or you may observe rust along the edges of a plank.

What to do if you live in a high rise building?

Consider installing a moisture barrier, if necessary, and an appropriate sound barrier, such as cork, if you live in a high-rise building. It will help avoid future problems. Now you can start the process of selecting, cutting, sizing, and installing the new wood planks.

Is hardwood flooring good for a dance studio?

From offices to the home interior to the dance studio floor, hardwood floors are an ideal pick for every space.

Can you refinish wood floors to repair water damage?

You may sand, refinish, and re-coat the wood floor to repair water damage, but is not a permanent solution. The best way to avoid and fix water damage for wood floors is to get them repaired. For this, you will have to take out the affected planks and replace them with new boards.

Can you replace planks that have water damage?

This is certain that you’ll have to replace the planks that are visually appearing damaged with water. But, there might be invisible mold, mildew, or water accumulation on the non-affected planks that may appear in the future. Therefore, you’ll also have to take additional planks out, surrounding the damaged planks.

How to deal with water damage on wood?

The best way to deal with water damage is to keep it from happening in the first place. Make sure you have the proper sealant to protect your wood, and don't forget to reapply it every few years.

What to do if water gathered on floor?

The water that gathered on your floor was likely dirty (especially if this water came from a floor or a leak). To remove any dirt or harmful bacteria, you brush the entire floor with a stiff, scrubbing brush.

Why does my hardwood floor feel squishy?

Your hardwood flooring shouldn't feel squishy when you take a step. If it does, odds are the structure underneath the flooring is rotted or damaged. This might mean you have a leak under your flooring or that it absorbed a lot of water from a spill or a flood.

How long does it take for a floor to dry?

Open the windows and doors to allow more airflow through the space. This drying process may take several hours or, depending on how much water seeped into your flooring, several days.

Why does wood warp?

Since wood swells up when it absorbs water, it can warp out of shape. If you notice any bubbling on the surface of the wood, curling at the edges, peeling, or otherwise odd-looking shapes, your wood is very wet (or at least was at one point).

What happens if you leave a floor alone for too long?

The longer you wait, the worse the damage will get. If you leave it alone for too long, you may end up having to replace the floor.

What causes water to stains on wood?

Stains. Water can create stains on the surface of your wood if you don't clean it off fast enough. If you can see outlines of a puddle or other types of discoloration, water is gathering on the top of your floor.

Why is my hardwood flooring water damaged?

Problems that cause damage to wood floors may happen due to persistent moisture over a long period. External sources are the first place to look to determine the cause.

How do I remove paint from hardwood floors?

First, scrape the paint off and use an abrasive cleaner to scrub the wood. Dry the floor with the method outlined earlier, and when completely dry, you can then refurbish your hardwood flooring.

What does it mean when your floorboards are cupped?

Each of the floorboards has a concave appearance. Cupping is the first sign that indicates there is a moisture problem in your floors.

What does crowning mean on a floor?

Crowning usually means that the moisture content at the top of the floor is higher than that at the bottom.

How do I clean mold off a floor?

Clean the floor and treat moldy areas. To thoroughly clean the floor, you will require a mild detergent combined with a compatible disinfectant such as Mr. Clean. Add the detergent and disinfectant to a bucket of warm, clean water and stir to ensure an even mixture .

How much moisture does a flooded floor have?

The moisture content in any typical hardwood floor ranges between 6-12% and a flooded floor will have a moisture content of 40% ; which is why the damage can be severe.

How to get rid of mold on a carpet?

Scrub all the affected areas with the cleaner, ensuring the mold is gone together with its discoloration. Rinse the area with clean water and then dry the surface with a cloth.

How to get rid of mold in a room?

The most obvious sign of mold growth is the musty smell. If molds started to thrive in the room, use a bleach solution to kill off mold and spores.

Can you dry wood floors with fans?

You can dry the floor naturally using fans, but make sure not to apply any heat. Applying heat to wood may lead to mold growth and other problems. If the weather permits, open doors, and windows for proper air circulation. If the condition of the room is too humid, you may need to use a dehumidifier to remove moisture in the room.

How to tell if hardwood floor is buckling?

Signs of buckling hardwood floor. Lifting up or actual pull up from the sub-floor can be a green-light for buckling damage. Puffed-up areas on the floor or crowning, especially in moisture damage areas. Wood floor cupping or when boards turn up on the edges. Gap and cracks between hardwood planks.

How to replace warped wood planks?

For this step, you will need new hardwood planks to replace the warped ones you removed. Ensure the color, finish, and shine are the same for better consistency. Measure the plank needed and cut off the plank that fits the cut damaged piece.

Why do you need to remove planks from a floor?

You may need to remove the damaged planks from the floor if the moisture has caused irreparable warping and buckling. Do it carefully to avoid damaging the other wood planks. Depending on the extent of moisture damage, you may remove part of the plank or the whole plank.

Why is my hardwood floor crowning?

Its usually caused by sanding a cupped floor before it completely dries up. Moisture build-up, wet mopping, and plumbing leaks are the main cause of hardwood floor crowning.

How to remove a wood plank?

For partial removal of wood, set a circular saw to a depth of the board thickness. Make a cut parallel to the damaged part. Use a chisel, screwdriver or pry bar to pry out the cut strip or the whole wood plank. In some cases, you will need a hammer to loosen the tongue and groove joints.

Can moisture build up on laminate floor?

Humidity can lead to gradual moisture build-up without even realizing it. Moisture build-up may also come up as a result of flooding. Moisture generally triggers floorboards expanding, contracting and at the end lift up after water saturation. Warping problems also may occur and affect your laminate floor.

Do you need to refinish hardwood floors after replacing buckled planks?

You’ll then need to refinish the entire floor after replacing the buckled plank to maintain a uniform look. Ensure you prevent moisture from flooding or sub-floor moisture buildup, drainage problems, or leaking pipes that may cause warping and swelling on your hardwood floors.

Identifying Water Types

The first step with all water damage is to find the source of the leak and stop it. You might need to turn off the supply to your home or call your plumber to help plug it. Once no more water is flooding onto the floors, you need to know just what type of water damage you are dealing with.

Signs of Water Damage on Your Floors

Next, it’s time to identify how your flooring reacted to the water. What you might assume is natural wear over time could really be telltale signs of water damage.

How to Repair Water Damaged Wood Floors

Once you’ve classified the water damage, stopped the source, and understand what type of damage you’re dealing with, you can begin to fix the floors.

Do I Need to Replace My Water Damaged Wood Floors?

In serious cases, you may need to replace your flooring. For example, if a leak occurred while you were on vacation, enough time may have passed for mold to grow — in which case the only safe option is replacing your floors. In fact, after 24 hours of water damage, mold can grow and floors could require replacement.

How to Prevent Damaging Your Wooden Floors

If you have a room prone to excess moisture, install a dehumidifier to keep the water level in the air regulated. Cover your wood floors with plenty of rugs, as it’s easier to dry cotton than wood.

Need Help? Call All Dry USA!

Never attempt home repairs if you don’t feel comfortable or safe, or it’s dangerous (as in the case of black water flooding). Don’t start nailing down floorboards or renting an orbital sander if you don’t have the proper tools or time. Home repairs can turn into large projects very quickly, but you don’t have to go through it alone.

Be Sure To Document the Level of Water Damage

Before you do any repairs, you want to take photos of your water damage and make notes about it. This will help you with any insurance claims. You also want to do some research into the water damage itself, which can help you to prevent the same issue from occurring again and damaging your floors again.

Will Repairs Do, Or Do You Need a Full Replacement?

Sometimes, a floor is damaged so much that you simply can’t make repairs and instead need to replace the entire floor. If your moisture content is too high on every board, it doesn’t make sense to repair it. The moisture content of your boards depends on how long it was exposed to water.

Figure Out What Caused the Issue

Once again, the biggest thing you need to tackle first is figuring out what caused the water damage to begin with. Most people will know what caused the issue, like a leak in the dishwasher or a flood from a fire, but sometimes the reason isn’t always apparent.

Fix Your Water Damaged Wood Floors

The sooner you fix your damaged wood floor, the easier it will be and the better chance you have. First, you want to secure the area and clean up all of the water. You don’t want to introduce any more water while you are working on your floors.

Fixing Your Wood Floors Is a Snap

Fixing your water-damaged wood floors doesn’t have to be the nightmare it is sometimes portrayed to be. It actually isn’t a difficult process at all if you only have a board or two that is water damaged. However, if almost every board needs fixing or nailing, then you may just want to replace the entire floor for the best results.

How to get rid of mold on a carpet?

Scrub affected areas with the solution until the mold and mold discoloration are gone, then rinse with clear water, and dry the surface with an absorbent cloth.

What is laminate flooring made of?

The majority of a laminate flooring plank is made with wood pulp, much like particleboard or MDF (medium-density fiberboard). This material is highly vulnerable to water damage and swells when it gets soaked, ruining the integrity of the material. Most laminate flooring that is water-damaged must be replaced.

Can you sand a wood floor flat?

After drying a wood floor, you may have some concave or convex floorboards; this is called "cupping." Heavy sanding with a drum or orbital sander can actually "take down" some minor high areas. However, heavily cupped wood cannot be sanded down flat. It is inevitable that some floorboards may lift up completely at the ends. In this case, face-nail the floorboards back down.

Can water penetrate wood floors?

Even if you believe your wood floors are so well-finished that water cannot penetrate to the raw wood, think again. Wood floors have many infiltration points besides the top layer: between seams, through breaks in the coating, under baseboards, through heating registers, and a host of other areas.

Can standing water damage hardwood floors?

Standing water and hardwood flooring don't mix. For anyone who lives in hurricane- and flood-prone areas that have historic homes, this comes as no surprise. If major amounts of water—flood-related or not—have come into contact with your wood floor, your floors will never be quite the same as new again, but you can take steps toward saving them ...