how to repair hole in plastic bumper

Here are the four steps involved in fixing a small hole in a plastic bumper:

• Sand the area around the hole to ensure a smooth surface.
• Affix a piece of repair adhesive to the inside of the bumper.
• Apply adhesives to the exterior of the bumper, following the manufacturer’s instructions.
• When dry, sand smooth and paint over the area.

Full Answer

What do you need to fix a hole in a bumper?

An Exacto Knife or Blade – You may need this to remove burrs or pieces of plastic sticking out from the hole. Plastic Repair Adhesives and/or Body Filler – The plastic adhesives you need will depend on the type of plastic used in the bumper cover.

What tools do I need to replace the front bumper cover?

1 Wrenches and Screwdrivers – For removing and replacing the bumper cover. 2 A Variety of Sandpaper – Have at least a selection of from 80- to 400-grit paper. ... 3 An Exacto Knife or Blade – You may need this to remove burrs or pieces of plastic sticking out from the hole. 4 Auto Repair Cloth or Fibreglass Repair Tape More items...

Is it possible to repair a broken bumper?

But if your car meets the sharp edge of a 2-foot parking barrier, the semi-flexible plastic can easily rip, bend, or break. Fortunately for your bruised bumper, plastic repair and refinishing materials are widely available and reasonably simple to use.

What adhesives do I need to fix a plastic bumper?

But which adhesives you need will depend on the type of plastic in your bumper. Thus, the first step is to find a stamp on the inside of your bumper labeling it as PP, PPO, TPE, PUR, or TPUR.

How do you fill plastic holes in a bumper?

0:114:33How to Repair a Hole in a Bumper using U-POL 7061 - YouTubeYouTubeStart of suggested clipEnd of suggested clipPart number up7 o61 it's a flexible high density filler made specifically for the repair of TPO edpmMorePart number up7 o61 it's a flexible high density filler made specifically for the repair of TPO edpm. And polypropylene as well as any other flexible component that you come in contact with in

What filler can I use on a plastic bumper?

Choose a flexible filler such as 3M™ EZ Sand Multi-Purpose Repair Material.

Can you fix a hole in a front bumper?

You may need to do this on the inside and outside of the bumper cover. Support the Repair Area – Attach a piece of auto repair cloth or fibreglass tape on the inside of the bumper cover to support the repair adhesive or filler that you'll apply to the outside of the cover.

How much does it cost to fix a hole in a plastic bumper?

Crack or hole: $300-$450 If your bumper is cracked or has a hole, depending upon its severity, it may be repaired by putting plastic filler in the crack (and then sanding and painting).

Will Bondo work on plastic bumpers?

2:276:06Can Body Filler Bondo Be Applied On Plastic Bumper Covers? Q&AYouTubeStart of suggested clipEnd of suggested clipAnd you squeeze it out and you put it over the repair area. And you can block that out a lot likeMoreAnd you squeeze it out and you put it over the repair area. And you can block that out a lot like body filler doesn't seem quite as good as muddy filler. But you know it works real well it's flexible.

Will Bondo work on plastic?

Archived. If you rough up the plastic with some 80 grit sandpaper and then wipe it down with some lacquer thinner (or something similar to clean it), the Bondo will stick just fine. Don't mix more than you can apply in about 5 minutes.

How do you repair a bumper puncture?

0:5816:22DIY Bumper Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we're gonna go ahead and show you the steps to repair it now let's take a look at the tools thatMoreSo we're gonna go ahead and show you the steps to repair it now let's take a look at the tools that we have for it all right so we have the bumper bag we have a couple dollies a flat hammer harbor

How do you fix a hole in polyethylene?

0:061:24REPAIRING holes in polyethylene or poly propylene plastic ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd just filling that hole with it. So just keep both sides molten. And just keep adding plastic. InMoreAnd just filling that hole with it. So just keep both sides molten. And just keep adding plastic. In here you can see it's starting to really fill up and then once you get the right amount of plastic.

Can you repair plastic bumper with fiberglass?

A plastic bumper repair is an easy weekend body repair job to help beautify your car by getting rid of deep scratches and cracks. One option for this type of repair job is to use a fiberglass body repair compound such as Bond-O.

Can plastic bumpers be repaired?

Many plastic bumper parts can be repaired, especially bumper covers, which are commonly damaged on a vehicle. By saving your bumper, the technician will also be able to blend the appended paint more efficiently and accurately.

Is it cheaper to repair or replace a bumper?

Bumper repair can be performed in-shop and is often cheaper than bumper replacement. Bumper repair normally costs between $100 and $1,000.

How much is a new plastic bumper?

Need Auto Repairs? The average cost to repair plastic bumpers ranges from approximately $150-$450. However, the cost to replace a bumper in the event of extensive damage can be anywhere between $800-$1,300. In many cases, your insurance should cover the repair.

How do you fill a hole in a front bumper?

0:494:18How To Get Rid Of License Plate Holes - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you're going to go on and get a drill quarter inch no bigger. And you're going to take it andMoreSo you're going to go on and get a drill quarter inch no bigger. And you're going to take it and drill out the hole. Both of them battery's kind of dead.

Can rubber bumpers be repaired?

0:385:33Plastic Rubber Bumper Repair Tips - Replace or Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipLike this one here ok this looks pretty severe right but this stuff can be repaired all you got toMoreLike this one here ok this looks pretty severe right but this stuff can be repaired all you got to do is get a heat gun or a hair dryer. Make sure you get it nice and hot.

What to use to remove bumper cover?

Wrenches and Screwdrivers – For removing and replacing the bumper cover. A Variety of Sandpaper – Have at least a selection of from 80- to 400-grit paper. A finer grit will give you a smoother surface for painting. An Exacto Knife or Blade – You may need this to remove burrs or pieces of plastic sticking out from the hole.

Where to put auto repair tape on bumper?

You may need to do this on the inside and outside of the bumper cover. Support the Repair Area – Attach a piece of auto repair cloth or fibreglass tape on the inside of the bumper cover to support the repair adhesive or filler that you’ll apply to the outside of the cover.

Can you fix a hole in a plastic bumper?

You may be really cautious, but the other cars in the parking lot might not be. Luckily, with the right tools and techniques, you can fix a hole in a plastic bumper fairly easily and avoid a visit to the auto body shop.

How do I repair a bumper on my car?

To repair the bumper you have to first get it off your car. There should be a few screws on each side. Then sand down the edges of the hole to make it smooth. Use the exacto knife on any larger protrusions.

Is it cheaper to do bumper work?

Doing your own bumper work can be cheaper but it also comes with more risks. You need a lot of tools and safety equipment most people don't have. The auto body shop has trained professionals to fix your car. However, it can be more expensive.

Can I repair my bumper on my own?

If you're going to repair your bumper on your own their are a few things you need to have and understand before you start. Having the right tools and understanding the process is vital to doing this bumper repair right.

What to do if your bumper is cut?

If the bumper is cut or torn through completely, make sure to scrub the inner and outer surfaces. After rinsing and letting the surface dry, wipe the area with prep solvent, moving in only one direction. Ask Question.

How to repair a bumper with a 400 grit paper?

Once the primer has hardened, dry sand the repaired areas with 400-grit paper to level it and remove any imperfections. Before spraying the bumper with basecoat, wetsand it and gently wipe the area with a tack rag to remove dust, then spray according to the manufacturer's instructions.

How long does it take for a fascia to dry before painting?

When the repair is completed, apply two wet coats of flexible part sealer. After drying for 30 minutes , the fascia is ready for priming and painting. Prime the fender with two coats of any two-part primer-surfacer, making sure to let the primer dry between coats.

How to repair a tear in the back of a fascia?

If the cut or tear is large, you might have to align and then hold the edges of the repair with masking tape on the front of the fascia. Use self-stick fiberglass-repair tape to add structure to the cut or tear.

Can you repair a bruised bumper?

Fortunately for your bruised bumper, plastic repair and refinishing materials are widely available and reasonably simple to use. Fixing damaged plastic bumpers involves grinding, sanding, sculpting, and painting, but it's worth the effort for repairs that would cost less than your deductible. Ask Question.