7 Jewelry Repairs You Can Do Yourself
- Replace a Broken Clasp. Many necklaces break at the clasp because it sees the most use. There are two typical problems,...
- Knot or Restring a Broken Necklace. Beading wire can loosen from the crimp beads that secure it to the clasp or break...
- Repair an Elastic Bracelet. Elastic bracelets, no matter how well made, will eventually...
Can you repair a broken clasp on a necklace?
How to Repair Jewelry Clasps. If your favorite necklace or bracelet has a broken clasp, don't leave it languishing in your jewelry box. For most types of clasps, it is an easy matter to replace the broken clasp with a new one.
How do you fix a broken spring ring clasp?
When a spring ring clasp is broken, the jeweler can either repair it or replace it. The most common repair is bending the little wire back into the hoop, when a bad tug pulls it out. If the entire hoop has been crushed, the jeweler replaces it, as there is no way to fix the damage.
How do you fix a clasp that falls off?
Many times, a clasp will fall off because the jump ring (a simple metal ring with a small cut on one side) has broken or stretched open. Replace a broken jump ring or crimp a loose ring closed. Identify the broken clasp type.
How do you remove a clasp from a jump ring?
Disconnect the old clasp from the jewelry. Use a pair of pliers to hold one side of the jump ring connecting the old clasp. Then use a pair of needle nose pliers to open the jump ring. Open the jump ring by twisting it, not spreading it. Spreading will weaken the ring.
Can a chain clasp be repaired?
You need to replace the broken clasp with a new one. When purchasing a new clasp, the safest bet is to buy one that is similar in size and shape to the old one. This will ensure your jewelry will fit and wear the same way. Once you've found the right one, attach your new jewelry clasp.
How do you fix a spring clasp?
0:243:37Fixing a Broken Lobster Clasp - How to Repair Jewelry At Home!YouTubeStart of suggested clipEnd of suggested clipWe're going to be using pliers and we're going to be pulling this down so that way it meets. ThisMoreWe're going to be using pliers and we're going to be pulling this down so that way it meets. This section here so the spring on this still works so it comes down.
How do you reattach a necklace clasp?
1:152:20How-to: Attach or Replace a Clasp - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen I'm gonna go in with the other jump ring open it up again and slide it on the other. Side. TakeMoreThen I'm gonna go in with the other jump ring open it up again and slide it on the other. Side. Take both of my pliers. And I like to wiggle a little bit and snug it right up.
How do you fix a necklace clasp that won't close?
0:291:34How to Fix a Clasp - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what we're gonna do is we're going to take a simple tap. And we're gonna actually open up thatMoreSo what we're gonna do is we're going to take a simple tap. And we're gonna actually open up that area. So what we're gonna do is I'm going to take the tack I'm gonna apply a little bit of pressure.
How much does it cost to repair a necklace clasp?
Replacing a Clasp: $65-$250+ Depending on the style, the size, and the type of metal the clasp is made of, this can cost you between $65 and $250. To give you a better idea of what your clasp replacement might cost, a standard gold 5 mm spring ring clasp can cost $30.
How do you fix a parrot clasp?
0:422:59Replacing a Parrot Clasp - Silver Necklace Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimple give it a twist and that should pop up there's the old ones off now we put the new one onMoreSimple give it a twist and that should pop up there's the old ones off now we put the new one on exactly the same thing hold it with one side the jump ring and the other side give it a twist open it.
How do you fix a screw clasp on a necklace?
0:245:24How to fix a broken screw clasp. Easy tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust popping it on how it will sit naturally. Then i'm just going to grab my glue. Then just placeMoreJust popping it on how it will sit naturally. Then i'm just going to grab my glue. Then just place in the glue on the back of the clasp. There. And on the thread.
How do you fix a broken chain clip?
1:1212:38How to Fix Broken Chain Necklaces jpg - YouTubeYouTubeStart of suggested clipEnd of suggested clipTaking it past the point where you think it's close tight and it'll kind of spring back in placeMoreTaking it past the point where you think it's close tight and it'll kind of spring back in place that addition of a jump ring then will allow you to either add your new clasp.
Can a lobster claw clasp be repaired?
0:562:47How I fixed a lobster clasp spring cheap and fast! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the little clip fell out. And then uh as you can see here it's repaired now this is the one thatMoreAnd the little clip fell out. And then uh as you can see here it's repaired now this is the one that was in my chain.
How do you close a chain clasp?
0:452:55DIY Jewelry Repair: How To Put A Clasp On A Chain - YouTubeYouTubeStart of suggested clipEnd of suggested clipOr. Press those two ends together so that they're kind of closes that little gap. And then we've gotMoreOr. Press those two ends together so that they're kind of closes that little gap. And then we've got our first end of our clasp on our chain.
How do you fix a snap clasp on a bracelet?
0:492:25How To Fix A Bracelet Clasp - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can get the same needlenose pliers. And just gently squeeze down on them ever so slightly just aMoreYou can get the same needlenose pliers. And just gently squeeze down on them ever so slightly just a little bit of time. And that also will be a good fix for the same.
How do you fix a loose brooch clasp?
Pin or brooch repair: Tighten a loose or wobbly pin stem by carefully squeezing the point flanges together with flat-nose pliers. Tighten a ball clasp latch by positioning the latch so the nubs point up, then firmly squeezing both sides of clasp together with flat-nose pliers.
How do lobster clasps work?
Lobster clasps are spring-loaded, but open by pushing down on the clasp. Their shape resembles a lobster claw. If the clasp is connected to the necklace by a jump ring, it is easy to replace. If the clasp is soldered on, you will need professional help. Buy a replacement clasp.
What to do if your bracelet clasp is broken?
If your favorite necklace or bracelet has a broken clasp, don't leave it languishing in your jewelry box. For most types of clasps, it is an easy matter to replace the broken clasp with a new one. Check that the actual clasp is broken.
How to open a jump ring?
Open the jump ring by twisting it, not spreading it. Spreading will weaken the ring. Attach the new clasp. Hook the new clasp through the jump ring and twist the jump ring closed. Make sure the jump ring is closed tightly, or the clasp may slip off through the gap. Repeat for the other end of the jewelry.
Why does my clasp fall off?
Many times, a clasp will fall off because the jump ring (a simple metal ring with a small cut on one side) has broken or stretched open. Replace a broken jump ring or crimp a loose ring closed. Identify the broken clasp type. There are several varieties.
What is magnetic clasp?
Magnetic clasps, where two opposite magnets are attached to each end of the necklace, are easy to use, but not all provide excellent holding strength. Test the strength before attaching to your jewelry.
How to make jewelry knots?
"Lightly dab oil (baby, vegetable, or olive oil—whatever you have in the house) on knots. With two straight pins, begin at the loosest point. Apply more oil as needed. It will help knots and tangles glide. Take your time. It works!"
How to make stretch bracelets?
I make my stretch bracelets 7-7 1/2 inches; just carefully wrap around your wrist until it's the right size. Tie one surgeon's knot as tightly as you can and two more single knots. Carefully, put a small drop of glue on the knot and slip the knot into the larger bead's hole.
What causes jewelry to turn different colors?
Discolored or Tarnished Jewelry. "Perfume, water, lotions, and even your unique body chemistry can cause jewelry to 'turn' a different color ," says Lou. Bring back the shine to your jewelry with a polishing cloth. It requires little effort and makes a big difference.
Can stretch bracelets break?
Stretch bracelets combine comfort and fashion, but they're also prone to breaking. "Gather up as many of the beads as you can, and head to the craft store," suggests Lou. "This is when you need to use the right materials . Look for an elastic cord designed explicitly for beading. I like 0.7 width. It's durable and makes a good knot. Pick up some super glue, and if you lost a bead or two, you might want to get replacements."
How to prevent tangled chain?
The easiest way to prevent tangled chains and knots from happening is to hang your chain jewelry instead of piling the links on top of one another in a box or on your dressing table. But once the knot or tangle is there—what do you do?
What to use to fix a ring that is too small?
Both of these are easily fixed with a metal ring mandrel and a leather mallet.
Why does my necklace break at the clasp?
Many necklaces break at the clasp because it sees the most use . There are two typical problems, a jump ring opens and part of the clasp gets lost or the spring clasp gets broken and no longer closes correctly. For both problems, the solution is the same. You need to replace the broken clasp with a new one.
How to make a ring larger?
To make the ring larger, you will continue tapping, rotating around the ring until it moves to the desired size on the ring mandrel. Note that re-sizing or re-shaping fine jewelry or rings with stones should only be done by professionals to avoid loosening stone settings or causing a stress fracture in the metal.
Can you loosen crimp beads?
Beading wire can loosen from the crimp beads that secure it to the clasp or break from abrasion and wear. When this happens, you will need to restring the necklace and attach the clasp using new crimp beads. This is one of the harder simple repairs, only because working with crimp beads can be difficult for new jewelry makers.
How to reshape a ring with a mallet?
Tap gently on the side with the mallet, gently pushing the ring down. Repeat on the other side by removing the ring and flipping it over. To re-shape a ring, you only want to apply enough pressure to make the ring round again.
Can you flatten crimps with a flat plier?
You can flatten crimps with flat-nosed pliers, but for a professional finish, special crimping pliers will make the job easy and give longer-lasting and beautiful results. 03 of 07.
Why are toggle clasps so popular?
However, because of their easy construction and reliance on the friction between the bar and the loop , toggle clasps are very prone to loosening and falling off easily. Repair is usually unnecessary for toggle clasps; most customers simply need replacement if one component goes missing.
What is the cheapest clasp?
The cheapest standard clasp, spring ring clasps function similarly to the lobster clasp. They’re extremely affordable and are very lightweight in comparison to other clasps. They also blend in with the design of the jewelry due to their thin structure, which is similar to a spring ring.
