How do I Fix my Joy-Con that won't turn on?
Use a spudger to gently pry the battery connector straight up from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair.
How to fix Joy-Con drift?
One of the easiest ways to fix Joy-Con drift is by cleaning the joystick with isopropyl alcohol. 2. Clean your Joy-Con's joystick If you still experience Joy-Con drift after calibrating and recalibrating, the next thing you should do is clean the control stick.
Why is my Joy-Con stick hard to move?
The control sticks on one or both of the Joy-Con controllers feel sticky, hard to press, or hard to move. After pressing down the control stick on the Joy-Con, it will not return to its normal position. Power off your Nintendo Switch system. Using a clean, dry toothbrush, gently brush the area around the control stick (s).
Can I get my Joy-Con repaired outside of the US?
The address you provide will be used to ship the Joy-Con back to you. If you live outside of the US or Canada, you must use a repair center in your area. Please carefully read and check each one of the repair terms below before submitting your Joy-Con repair.
How do I fix my Joy-Con controller stick?
Joy-Con Control Sticks Are Stuck or Difficult to MovePower off your Nintendo Switch system.Using a clean, dry toothbrush, gently brush the area around the control stick(s). Use a soft, dry cloth to wipe away any dirt or debris.Power on the system again, then calibrate the control stick(s).
Is Nintendo still fixing joy cons for Free 2020?
Ever since a report by Kotaku from July 2019 shined a light on the Joy-Con drift issue, Nintendo has changed its policies significantly. The company will now repair drifting Joy-Con controllers for free, even if your controllers are outside the regular warranty.
Can Switch joy cons be repaired?
Joy-Con Information Due to shipping regulations for lithium ion batteries, repair can only be set-up for a maximum of four (4) Joy-Con at a time. If you would like to set up a repair for five (5) or more Joy-Con, please fill out an additional form to receive an additional shipping label.
Is Nintendo still repairing Joycons for Free 2021?
As a reminder, Nintendo is still offering free Joy-Con repairs in North America. All you need to do is fill out an easy form, and live in the USA or Canada, and you're good.
How long do Nintendo Joy-Cons last?
approximately 20 hoursThe Joy-Con controllers take approximately three and a half hours to fully charge. When fully charged, the battery duration for the Joy-Con controllers can last approximately 20 hours. This can be shorter depending on the software application and functions being used.
Do New Joy-Cons Drift 2021?
Nintendo has made minor updates to Joy-Cons over the years, but the ones in the Switch OLED are the same as the controllers that came with the Switch V2, so they're still susceptible to drift. Players can purchase new controllers, but Nintendo's services also repair Joy-Cons with drift for free.
What causes stick drift?
A common reason why controllers run into drift problems is that they are prone to deterioration, which will naturally occur with use. In more recent years, the life cycle of technology has shortened dramatically to promote further purchases (yay, capitalism), thereby further exacerbating the issue.
Can you fix stick drift?
It's called controller drift, or analog stick drift, because one or both thumbsticks will drift, or move, in an undesired direction even when you aren't touching them. To fix Xbox One controller drift, you need to take the controller apart and repair or replace one or more components related to the analog sticks.
Are Joy-Con repairs free?
In 2019, Nintendo started repairing Joy-Con drift for free, even with an expired warranty.
How much does joy repair cost?
How Much Does Nintendo Charge to Repair Joy-Con? All Nintendo products have a limited hardware warranty which covers manufacturing defects for twelve months from the date of purchase. So, any repairs required during that time are free. If repairs are needed after the warranty has expired, it costs $40.
Is Joy-Con drift common?
Joy-Con drift has been a problem since the Nintendo Switch launched in 2017. It's still a prevalent issue with the newer model of the Nintendo Switch and the Nintendo Switch OLED, as they use the same Joy-Cons as the original. Anyone who experiences drift can try reporting it to have their controllers fixed.
How do you fix Joy-Con drift without tools?
9 Ways to Fix Joy-Con Drift on Your Nintendo SwitchReset Any Button Remapping. ... Check Your Controllers Are Connected Correctly. ... Update Your Switch System. ... Update Your Joy-Con Firmware. ... Recalibrate Your Control Sticks. ... Check for Game Software Update. ... Remove Any Skins or Covers. ... Clean the Joy-Con Control Sticks.More items...•
How long does Nintendo take to repair Joy-Cons 2021?
How long does a Joy-Con repair take? The general consensus indicates that Joy-Con repairs by Nintendo can take anywhere from 3 days to a month.
Is Nintendo fixing my Switch for free?
If you purchased your Nintendo Switch less than a year ago and it is not physically damaged, your repair is likely free. When sending your Nintendo Switch to a repair center, carefully wrap and pad the console to prevent any damage during shipping.
Does Nintendo fix drift for free?
Since the issue is widespread, Nintendo actually offers to fix Joy-Con drift for free (and has allegedly fixed the issue on newer Joy-Cons). This is currently the only "official" method of dealing with drift, though check below for some ways you can address the issue yourself.
Are Joy-Cons covered under warranty?
Be it an issue with the Joy-Con, kickstand, or something else, you are covered by Nintendo's limited warranty for 12 months. That's the standard length for any Nintendo console, including the Switch and the Nintendo 3DS line. Games and accessories sold separately carry a three-month warranty.
Introduction
The Nintendo Switch comes with two Joy-Con controllers. This guide will show you how to replace the joystick of the right Joy-Con. The procedure for repairing the left Joy-Con is different, so be sure to follow the correct set of instructions for your controller.
Step 1 Right Joystick
Remove the four tri-point Y00 screws from the back panel of the Joy-Con.
Step 2 Open the case
Insert an opening pick under the lower side of the back panel (opposite the R and ZR buttons).
Step 3 Open the case
Open the Joy-Con like a book, with the charging rail facing away from you.
Step 4 Disconnect the battery
Use a spudger to gently pry the battery connector from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair.
Step 5 Remove the battery
The following two steps show the removal of the battery and the coaxial antenna cable from the midframe. These two steps make for a less cluttered repair, but are not essential. If you want, you can leave the battery and the grey coax cable in place here and proceed to step 7.
Step 6 Remove the antenna
Before you perform this step, take note of how the antenna cable and its PCB are seated for proper reassembly later.
How to tell if a controller is remapped?
You can tell that a controller's stick inputs have been remapped because throughout different menus, a wrench icon will be displayed beside the controller in-use at the bottom-left corner of the system screen. Button Mapping: Joy-Con controllers attached to the system showing a wrench icon.
Does Mario Kart 8 Deluxe have tilt controls?
Some game, such as Mario Kart 8 Deluxe, support in-game tilt controls. If these are activated, it may seem as if the control sticks are not responding correctly. If this is the case, the in-game tilt controls may need to be deactivated.
Can you reset the controller on a Nintendo Switch Lite?
Upon waking up the system, you’ll have the option to reset the controller inputs. If the control sticks on Nintendo Switch Lite are not responding correctly, see Control Sticks Are Not Responding on Nintendo Switch Lite. Note: The Joy-Con cannot be attached to Nintendo Switch Lite.
Personal Information
Your repair instructions and shipping label will be emailed to you. Please enter your Nintendo Account email or primary email address below and ensure it is accurate.
Shipping Details
The address you provide will be used to ship the Joy-Con back to you. If you live outside of the US or Canada, you must use a repair center in your area.
Repair Terms (required)
Please carefully read and check each one of the repair terms below before submitting your Joy-Con repair.
1. Calibrate or recalibrate your Switch Joy-Cons
The first thing you should do if you notice Joy-Con drift (especially on the left Joy-Con) is calibrate your controllers. This is the most straightforward way to bring things back to normal. It's worth knowing how to do this because you'll end up checking the calibration at some point for pretty much all these tips.
2. Clean your Joy-Con's joystick
If you still experience Joy-Con drift after calibrating and recalibrating, the next thing you should do is clean the control stick. In the body of the Joy-Con at the base of the control stick is a sensor. Cleaning that sensor will resolve the problem of Joy-Con drift for most people.
3. Nintendo will fix Joy-Con drift for you
If calibrating and cleaning don't help, get Nintendo to fix it. The company has a Joy-Con repair program for hardware within its one-year warranty. However Nintendo has been fixing Joy-Cons with drifting issues for free even if they're out of warranty.
4. Buy a new Joy-Con for your Switch
Another option (possibly the most costly on this list) is to buy a new single Joy-Con for around $50. However, single Joy-Cons are often out of-stock. Even if you find one to buy, it might not be the side or color you want.
5. Replace the joystick yourself
This last tip is the most drastic. You can remove the problematic joystick and put a new one into the housing. There are numerous kits online. I got one on Amazon for $14 which comes with two new analog stick modules, and tools.
