how to repair kitchen cabinet hinges

1. Set Up Your Workspace. Begin by setting up your workspace for maximum efficiency. ...
2. Remove Old Doors and Hardware. The first step to replacing cabinet hinges is to take all the doors down and disassemble them. ...
3. Fill Old Holes. Use wood filler and a spackling tool to fill each hole. If your new hinges will be installed close to the originals, use epoxy wood filler.
4. Attach the New Hinges to the Doors. Measure up from the bottom of the door to two inches, then mark the spot with a horizontal line. ...
5. Attach Hinges and Hardware to the Door. Attach the hinges to the doors to prepare them for hanging. ...
6. Attach the Doors to the Cabinets. Find the horizontal center point of the cupboard opening and mark that point on top and on bottom. ...

Full Answer

How to adjust self closing kitchen cabinet hinges?

Method 3 Method 3 of 3: Fixing Cabinet Doors That Don’t Close Properly

1. Close the door and look on the side where the hinges are to see if it is binding. ...
2. Locate and loosen the locking screws with a screwdriver. Open up the cupboard doors and locate the locking screws; which are the horizontal screws on the part of the ...
3. Pull the door towards you and away from the cupboard frame to create a gap. ...

More items...

How to fix broken cabinet hinges?

How to Fix a Self-Closing Hinge on Cabinets

• Traditional vs. European Hinges. ...
• Self-Closing Cabinet Hinges Won't Close. Self-closing cabinet hinges that won't close might be poorly adjusted. ...
• Adjusting Traditional Hinges. You can adjust many traditional hinges by loosening the screws that hold it in place and then sliding the hinge plates.
• Adjusting European Hinges. ...

How to install hinges on cabinet doors accurately?

Method 2 of 2: Attaching Traditional Hinges

1. Choose a traditional hinge to add a stylistic detail to your cabinets. ...
2. Wrap the hinges around the cabinet so they’re flush. Start by placing the hinges on the cabinet where you plan to install them, wrapped around the outer edge of ...
3. Measure the spacing between the hinges to make sure they’re even. ...

More items...

How to install new hinges on old cabinet doors?

• Drill pilot holes where you marked the screw location on the doors. Go slowly so you don’t drill all the way through the door.
• Attach the new hinges with screws .
• Install new knobs and catches or reattach the old ones.

How do you fix the hinges in kitchen cabinet doors?

0:284:52Kitchen Cabinets, Fixing Stripped Screw Holes - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing you can try is using a larger screw. Using a larger screw the screw will look differentMoreFirst thing you can try is using a larger screw. Using a larger screw the screw will look different from the rest. And it may not sit flush on the hinge.

Can cabinet hinges be repaired?

3:219:35How to fix door hinges - cupboard cabinet repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow nice and simple way to repair a damaged or threaded screw this works very very well for yourMoreNow nice and simple way to repair a damaged or threaded screw this works very very well for your doors door jambs anything where you've got a screw.

How do you fix cabinet hinges?

Dip wooden toothpicks into wood glue and then stuff the cabinet hinge hole with as many toothpicks as will fit. Break off the toothpicks so they are flush with the cabinet. Once the glue is dry, reattach and screw the hardware back into place.

How do you fix a stripped cabinet door hinge?

0:181:17How to fix a stripped screw on a cabinet door - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd flip your hinge out of the way. You take a toothpick. And you stick it in the hole to fill theMoreAnd flip your hinge out of the way. You take a toothpick. And you stick it in the hole to fill the wood and you may have to put it in there a couple of times like so I'm breaking it off flush.

Can soft close hinges be repaired?

When a soft-close hinge has stopped working, it's most likely due to one of the screws becoming loose. This will cause the hinge to come out of place or allow the door to sag down. To repair this, all you need to do is find the loose screw and tighten it with a screwdriver.

How do you reattach cabinet door hinges?

0:100:53Attaching doors and adjusting hinges | kaboodle kitchen - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply line the hinge up with the hinge plate. And click into position to adjust doors use theMoreSimply line the hinge up with the hinge plate. And click into position to adjust doors use the screws on the hinge. And the hinge plate.

How do you fix a broken particle board hinge?

0:001:13Fix Particle or Chipboard Screw Holes - YouTubeYouTubeStart of suggested clipEnd of suggested clipBoard you can repair it by fill in the missing area with two-part epoxy putty.MoreBoard you can repair it by fill in the missing area with two-part epoxy putty.

Do cabinet hinges wear out?

"You shouldn't have to go through much trouble to shut your cabinet doors," Handyman Paul Schramm said. Most of the time it is not a problem with the doors, it's a problem with the hinges. "The hinges wear out over time, these hinges are bad and we are just going to replace them."

How do you put clips on hinges?

2:294:56Hettich Restrictor Clip Installation Video (full) - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull either and basically what you want to do to install the headache restrictor clip is you want toMorePull either and basically what you want to do to install the headache restrictor clip is you want to bend. The actual elbow to almost about a 95. Or. So 85 degree.

How do you fix a stripped screw hole?

0:446:22How to Fix Stripped Screw Holes - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd get some toothpicks for this hole right here three ought to do it just place them in the hole.MoreAnd get some toothpicks for this hole right here three ought to do it just place them in the hole. Like that break off the excess.

How do you fix a screw hole that is too big?

0:104:59How to fix a loose wood screw - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can easily fix this by simply inserting a small diameter piece of timber.MoreYou can easily fix this by simply inserting a small diameter piece of timber.

How do you fix a stripped screw hole in MDF?

For best results, I would suggest that you smear a thin layer of glue (I'd probably use slow-setting epoxy) on the outside of the insert; then drive the insert into the MDF; wipe off any excess glue and wait. After the glue is fully cured, put the board in place and screw it down.

How do you fix a broken particle board hinge?

0:001:13Fix Particle or Chipboard Screw Holes - YouTubeYouTubeStart of suggested clipEnd of suggested clipBoard you can repair it by fill in the missing area with two-part epoxy putty.MoreBoard you can repair it by fill in the missing area with two-part epoxy putty.

How do you fix a wood door hinge?

0:183:54How To Repair Stripped Door Hinge Holes. Fix stripped wood screw holes.YouTubeStart of suggested clipEnd of suggested clipUse some gorilla glue and a hammer put some glue on the golf team you're going to drive it into thatMoreUse some gorilla glue and a hammer put some glue on the golf team you're going to drive it into that hole let it dry and then once it's dry. Then you take it screw the screw into it.

How to adjust hinges if they don't have depth screws?

If your hinges don’t have depth screws, start with the side screws. These move the door from side to side. In some cases, you have to loosen the depth screw slightly to adjust the side screw. Perfect one door before adjusting the second.

How to hide scratches on kitchen cabinets?

If you have shallow scratches or nicks, hide them with a stain-filled touch-up marker. Dab on the stain and wipe off the excess with a rag. But beware: Scratches can absorb lots of stain and turn darker than the surrounding finish. So start with a marker that’s lighter than your cabinet finish and then switch to a darker shade if needed. For deeper scratches, use a filler pencil, which fills and colors the scratch.

What does it mean when a cabinet door doesn't close?

Most newer cabinets have self-closing hinges that hold the doors shut. Others have magnetic or roller catches. A catch that no longer keeps a door closed is either broken or out of adjustment. Catches are fastened with two screws, so replacing a damaged catch is simple. Adjustment is just as simple, but you might have to readjust the catch a couple of times before you get it right. Loosen the screws, move the catch in or out, and tighten the screws. If the door doesn’t close tightly, try again.

What is Euro hinge?

Euro hinges are designed for easy adjustment. If the door isn’t flush with the doors next to it, adjust the depth screw. This screw moves the door in or out. Some depth screws move the door as you turn them. But with most, you have to loosen the screw, nudge the door in or out and then tighten the screw. If your hinges don’t have depth screws, ...

How to adjust a door that doesn't close?

Adjustment is just as simple, but you might have to readjust the catch a couple of times before you get it right. Loosen the screws, move the catch in or out, and tighten the screws. If the door doesn’t close tightly, try again.

What to do if your slides are bent?

To keep the project simple, buy new slides that are identical (or almost identical) to the old ones. That way, replacement is an easy matter of unscrewing the old and screwing on the new.

How to fix loose nails?

Remove nails, staples or screws from the loose joint and scrape away old glue with a utility knife. Predrill nails holes and glue the joint. Predrill 1/16-in. holes for nails, apply wood glue to the joint and nail it together with 1-1/2 in. finish nails.

How to cut toothpicks out of cabinet?

Break off each toothpick so it is flush with the cabinet surface. A craft knife comes in handy for cutting them if they don't break cleanly.

What to do if your cabinet is warped?

For instance, if a cabinet shelf, drawer box or any of the doors and drawers have warped, you usually need a cabinetmaker or carpenter.

Why won't my cabinet door close?

A cabinet door that doesn't close or that doesn't stay closed is often caused by a problem with one of the hinges. Check the hinges to see if any of them are loose or no longer flat against the cabinet or cabinet door. If a hinge is loose, the most common cause is a loose screw or two.

What is a fill stick for cabinet?

A fill stick, available at most hardware stores, comes in handy for filling tiny holes, such as old screw holes or gouge marks on a door or drawer front.

How to get a close color match on a cabinet?

Start with a color slightly lighter than the cabinet's finish and then layer darker markers until the scratch is no longer obvious. Test markers in an inconspicuous area first to ensure a close color match. 2.

How to get rid of excess marker ink?

Wipe away excess marker ink with a soft cloth if necessary before it dries. If you don't know the name of your cabinets' finish, pick up a set of wood-repair markers from a home improvement store. These usually include markers in common natural-wood finishes.

Can you fix laminated kitchen cabinets?

Most modern kitchen cabinets are made from laminated plywood or particleboard, and the lamination has a nasty habit of peeling away when it gets wet or sometimes even when it's dry. You can usually fix lifting laminate yourself, but if moisture was the cause of the peeling, you have to make sure everything dries out before you attempt the repair, and you have to do something about the source of the moisture. Another thing to remember is that particleboard that has suffered water damage often remains flaky and unstable, so the repair might not work.

What happens if the hinges on a door are not secure?

If these four mounting screws are not secure, the hinges may move, causing the doors to not operate properly. Use a Phillips-head screwdriver to tighten any loose mounting screws so they are secure.

Why are my cabinet doors sagging?

If you notice that your cabinet doors are sagging, it may mean that they are simply too heavy for the current hinges. In this case, consider replacing the hinges or even just adding an additional set of hinges to the cabinets to reduce the weight being placed on the old hinges.

Where are the mounting screws on a cabinet?

They should be the innermost screws on the mounting bracket. One is located just above the hinge , with the other located just below it.