How to make homemade pasta with a KitchenAid mixer?
- Attach the flat beater to the stand mixer and place the flour, salt, eggs and water (begin with ½ tablespoon and add more as needed) into the mixing bowl. ...
- Remove the flat beater and attach the dough hook, knead until the dough indents when you touch it. ...
- Dust a cutting board with flour and knead the dough for a few minutes. ...
How to use your KitchenAid to make pasta dough?
Using the widest setting (1 on the Kitchenaid), turn mixer to speed 2 and taking one piece of the flattened dough, feed through rollers. Fold dough in half & roll again. Repeat 3 more times, lightly dusting the sheet of pasta in between each rolling if it feels the slightest bit sticky.
How to use juicer and sauce stand mixer attachment- KitchenAid?
- It’s a bit pricey for an accessory
- Not ideal if you don’t have a KitchenAid Mixer
- Higher RPM than traditional slow juicers
- Short product warranty
How to safely use a KitchenAid mixer?
To Remove Bowl on a Tilt-Head Mixer:
- Turn the speed control to OFF and unplug the stand mixer.
- Slide the lever to the unlock position and tilt the head of the mixer back.
- Remove the flat beater, wire whip or dough hook by pushing up, turning to clockwise and pulling downward.
- Turn the bowl counterclockwise until you feel it detach from the bowl-clamp plate.
How do you take apart a KitchenAid pasta extruder?
0:000:47How to Clean the KitchenAid® Gourmet Pasta Press AttachmentYouTubeStart of suggested clipEnd of suggested clipCleaning your KitchenAid gourmet pasta press attachment remove the pasta press from the stand mixerMoreCleaning your KitchenAid gourmet pasta press attachment remove the pasta press from the stand mixer hub and disassemble all parts. Allow any excess dough in the pasta plates to dry thoroughly.
How do you clean a KitchenAid pasta roller?
0:000:32How To: Clean the 3-Piece Pasta Roller and Cutter Set | KitchenAidYouTubeStart of suggested clipEnd of suggested clipLet the attachment hair dry then use the cleaning brush to remove any dry dough if the dough isMoreLet the attachment hair dry then use the cleaning brush to remove any dry dough if the dough is difficult to remove tap the attachments with your hand or use a toothpick if necessary.
How do you lubricate a pasta roller?
Lubricate your pasta roller: We recommend using light mineral oil to lubricate the gears periodically. Add a drop of mineral oil to each of the far corners of the rollers and/or cutters to lubricate the gears (4 locations). This can be done annually or after 50 uses.
Why is my pasta machine not cutting?
If wet dough is inserted into the maker, it won't cut very well. When you find yourself with partially cut dough that requires you to manually tear the strips of pasta by hand, then the dough is still a little too wet. If your dough is too wet, give it time to dry, or add more flour.
Are Kitchen Aid pasta rollers dishwasher safe?
How to Clean the KitchenAid Pasta Sheet Roller. IMPORTANT: Do not use metal objects to clean out the Pasta Roller. Do not wash the Pasta Roller in the dishwasher or immerse in water or other liquids. The Pasta Roller should be hand washed.
Why is my pasta sticking to the machine?
The pasta cannot be too moist or the pasta will stick together as it extrudes from the machine. If it is too moist it should be sprinkled with flour and then sent back through the machine.
How do you clean a KitchenAid pasta extruder?
0:000:47How To: Clean the Gourmet Pasta Press Attachment | KitchenAidYouTubeStart of suggested clipEnd of suggested clipAnd pasta plates by hand only with a soft damp cloth the pasta ring auger and combo tool can beMoreAnd pasta plates by hand only with a soft damp cloth the pasta ring auger and combo tool can be washed by hand or in the top rack of your dishwasher.
Should you oil a pasta machine?
If your pasta machine has been exposed to water and has started to rust, you may be able to save it. The first step is to lubricate your machine. Add a few drops of mineral oil to the roller, using a brush to distribute the oil.
How do you maintain a pasta maker?
Wipe down the body of the machine with a damp cloth then dry it off. Get a clean, soft cloth wet and wring it out well. Run it over the entire exterior of the pasta maker to clean off flour and bits of dough. Use a second cloth to dry off the machine.
Why is my pasta dough breaking apart?
So what causes pasta dough to tear and form holes when rolling? The primary reason is that the dough is not being rolled, folded and fed in properly on the correct settings of the pasta roller. If the dough is not flat enough, fed in at the wrong angle, or too fast through the roller, it can bunch up and rip.
Can you sharpen a pasta machine?
Pasta machines are delicate and sharpening their blades is a job for the professionals. Fortunately, the company can put in the work for you!
How do you fix a jammed pasta maker?
This does seem to be a universal pasta machine problem. You can fix this by wrapping a bit of duct tape around the handle before jamming it back in. Or use the finger from a rubber glove. I have even heard of putting a tiny rare-earth magnet in the hole so they handle will stay stuck tight.
How do you clean a KitchenAid pasta extruder?
0:000:47How To: Clean the Gourmet Pasta Press Attachment | KitchenAidYouTubeStart of suggested clipEnd of suggested clipAnd pasta plates by hand only with a soft damp cloth the pasta ring auger and combo tool can beMoreAnd pasta plates by hand only with a soft damp cloth the pasta ring auger and combo tool can be washed by hand or in the top rack of your dishwasher.
Can you put KitchenAid pasta attachment in the dishwasher?
Cleaning the KitchenAid Pasta Attachment and Accessories Do not wash housing, cutter, and pasta plates in the dishwasher or immerse in water or other liquids. The housing, cutter, and pasta plates should be hand washed.
How do I use my KitchenAid pasta roller?
0:091:41How To: Use the 3-Piece Pasta Roller and Cutter Set | KitchenAid - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart with your pasta roller on the widest setting to begin meeting your dough. Cut your pasta doughMoreStart with your pasta roller on the widest setting to begin meeting your dough. Cut your pasta dough into sections that will fit into the pasta roller. Usually about four sections per recipe.
How do I clean my Imperia pasta maker?
Using a combination of a soft, dry cloth and a soft, dry brush, such as a pastry brush or paintbrush, gently wipe and brush away all visible traces of flour, crumbs and bits of dough from the machine and any accessories you used.
Still need help? Contact us or schedule service
Please contact us or click below to make an appointment from our preferred list of service providers for service on your appliances.
Interested in purchasing an Extended Service Plan?
Please click below to learn more on how you can save up to 25% on New Appliance Extended Service Plans within 30 days of your appliance purchase.
Is the Stand Mixer plugged in?
Ensure the Stand Mixer is plugged in. Check your outlet. If the Stand Mixer does not turn on, try another outlet.
Is the fuse in the circuit to the Stand Mixer in working order?
If you have a circuit breaker box, be sure the circuit breaker on the electrical circuit is connected and closed.
Did you use the correct speed for the Pasta Roller and Cutters
Use the correct speed for the Pasta Roller and Cutters, as suggested in the "Roller Settings Chart."
Did you attach the Pasta Roller or Cutter attachment properly?
CLICK HERE to check how to attach pasta roller and cutter to Stand Mixer.
Did you follow the usage instructions?
CLICK HERE for more information on how to use pasta roller and cutter attachments.
Pasta roller and cutter still do not operate?
Turn off the Stand Mixer for 10-15 seconds, then turn it back on. If the Stand Mixer still does not start, allow it to cool for 30 minutes before turning it back on.
Still need help? Contact us or schedule service
Please contact us or click below to make an appointment from our preferred list of service providers for service on your appliances.
Holes or tears in the dough
If the pasta dough is rolled too thin, it may cause holes or tears in the dough. Change to a thicker setting.
Roller not rolling
Is the dough too wet? Try adding some flour. If your roller does not roll or cutter does not cut after adding flour to wet dough, please Contact Us for further assistance.
Still need help? Contact us or schedule service
Please contact us or click below to make an appointment from our preferred list of service providers for service on your appliances.
Interested in purchasing an Extended Service Plan?
Please click below to learn more on how you can save up to 25% on New Appliance Extended Service Plans within 30 days of your appliance purchase.
To clean pasta sheet roller and cutter attachments
Let parts air dry for one hour and then remove any dried dough using the Cleaning Brush.
Still need help? Contact us or schedule service
Please contact us or click below to make an appointment from our preferred list of service providers for service on your appliances.
Interested in purchasing an Extended Service Plan?
Please click below to learn more on how you can save up to 25% on New Appliance Extended Service Plans within 30 days of your appliance purchase.
