How to Repair a Kwikset Door Lock Cylinder
- Step 1. Remove the outside door knob assembly from the door. Some models have a small pin on the neck of the inner door...
- Step 2. Push the small spring housing away from the cylinder on the inside of the door knob with the cylinder plug tool...
- Step 3. Place the flat retaining ring tool that comes with the kit around the...
Full Answer
How to rekey a Kwikset deadbolt lock?
- Prepare Necessary Tools And Workspace
- Remove The Locks From Your Door
- Free The Cylinder From The Housing
- Get The Plug Out Of The Cylinder
- Pull The Plug Out Of The Core
- Find The Reset Tab To Align The Wafers
- Insert New Key
- Reassemble The Lock
How to install Kwikset deadbolt locks?
Things You'll Need
- Drill or screwdriver
- Hammer
- Scrap piece of wood
How to rekey Kwikset SmartKey?
The Pros
- The Kwikset Smart Key design uses wafers to interact with a sidebar. This design protects lockpicking and key bumping.
- The ability to rekey a Smart Key Lock without disassembly is a major convenience.
- You can accomplish rekeying without the need for a locksmith
How to fix a jammed Kwikset indoor latch?
Is manipulating the door handle differently not making a difference in the latch retraction?
- Are you experiencing proper movement of the latch when the door is open?
- Is the door latch still stuck in place?
- Is manipulating the door handle differently not making a difference in the latch retraction?
How do you troubleshoot a Kwikset lock?
Test each button on the keypad (one at a time), and listen for a beep as each button is pressed. If beeping is not heard on all buttons, replace the batteries. If battery replacement does not solve the problem, contact Kwikset Support at 1-866-863-6584.
Why won't my Kwikset lock won't lock?
Check that the bolt hole is at least 1” deep so the bolt fully extends. Check that the door closes properly so that when the deadbolt is extended, it is going into the bolt hole and not hitting the deadbolt strike or door frame. Check that the mounting screws securing the exterior keypad are not over-tightened.
How do you fix a Kwikset deadbolt?
0:201:24How to tighten electronic kwikset deadbolt - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's get at it now the first step there's a set screw on both sides that we need to remove. SoMoreSo let's get at it now the first step there's a set screw on both sides that we need to remove. So we're gonna remove those I've removed them already. Once that's done this unit comes off right.
Why is my Kwikset key not working?
If your cylinder will not rotate with the key used during re-keying, your cylinder has become misprogrammed. A common reason for misprogramming is that they key was not fully inserted during re-keying. Another common reason is that they key was accidentally pulled while rotating to the home position.
How do you fix a lock that won't lock?
1:104:12How to Repair a Door Lock. THE EASY WAY! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what you need to do is you need to go for a dry lubricant. Something like a silicon spray or inMoreSo what you need to do is you need to go for a dry lubricant. Something like a silicon spray or in this case a graphite powder. And graphite is a super fine powder.
Why is my keypad door lock not locking?
If you find that the issue is the lock, try rebooting the lock first. To reboot the lock, remove one battery from the lock and replace it. Once you have rebooted the lock, try the entry code again. If this does not work, the keypad must be reset.
How do you put a Kwikset deadbolt back together?
3:527:29How to install new Kwikset door handle & Deadbolt - FAST & EASY!YouTubeStart of suggested clipEnd of suggested clipThe latch bolt see that once you compress it I'll line this properly. And slide it through the slotMoreThe latch bolt see that once you compress it I'll line this properly. And slide it through the slot I'll need both hands and once you get that slid.
How do you fix a loose deadbolt lock?
1:192:32Home Improvement & Repair Tips : How to Fix Door Locks - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn it where it's actually opening the doors actually opening where you'll open and close and whatMoreTurn it where it's actually opening the doors actually opening where you'll open and close and what you do is you take the deadbolt. And you're going to make a little mark. Right on top of it.
How do you change a Kwikset cylinder?
1:273:25(118) How to Remove the Cylinder from a Kwikset Door knob - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd with the camera up here you can see and then once that's all the way in that piece is held up.MoreAnd with the camera up here you can see and then once that's all the way in that piece is held up. Yeah. I should just tap it and the cylinder will come out.
How do you open a Kwikset lock without a key?
1:203:51How to Open a Kwikset Smart Key Lock in 10 seconds Video by Mr ...YouTubeStart of suggested clipEnd of suggested clipIt. I'm right-handed but i'm doing this my left hand uh here's the force. Tool. Put it in i like toMoreIt. I'm right-handed but i'm doing this my left hand uh here's the force. Tool. Put it in i like to use just a pair of vice grips on the end. Just force it over take my tool. Out.
What to do if SmartKey is not working?
To check if your smart key's batteries are dead, simply open the key up and replace the batteries with new, fresh ones. If your smart key is still not working after replacing the batteries, check to see if your car is not detecting your smart key.
Can I rekey a Kwikset lock myself?
Re-keying SmartKey locks requires only three items and entails three easy steps. Users must have their functioning key, a SmartKey Learn Tool, and a new Kwikset key. First, insert the functioning key and turn it ¼-turn clockwise. Then, insert and remove the SmartKey learn tool.
How do you Repin a deadbolt?
3:3618:37How To Repin A Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnother very common type of end cap has a c-clip that pops on and off if you have a c-clip a pair ofMoreAnother very common type of end cap has a c-clip that pops on and off if you have a c-clip a pair of pliers works. Best in the case of a pin style.
How do you take a deadbolt cylinder apart?
4:486:14How To Remove Lori Double Cylinder Deadbolt | Mr. Locksmith™ VideoYouTubeStart of suggested clipEnd of suggested clipSo if you run across this lock and you can't figure how to pull it apart so take the strike.MoreSo if you run across this lock and you can't figure how to pull it apart so take the strike.
Why is my Kwikset lock blinking red?
Red indicates low battery. For other operating modes, please see Aura installation guide.
How do you reset a deadbolt lock?
0:562:23How to Re-Key a Key Control Deadbolt Lock - Kwikset - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I just receive that lock crazy huh we can also change out the master key just as easy ok tie meMoreAnd I just receive that lock crazy huh we can also change out the master key just as easy ok tie me and watch this we insert the smart key learn tool into the slot at the bottom of the cylinder.
How to use a key on a lock?
Insert the new key you wish to use with the lock. Make sure your key is FULLY inserted. The edge of the key touches the indent in the cylinder face. Without pushing or pulling the key, rotate it 180 degrees counter-clockwise. Then rotate they key 180 degrees clockwise.
How to re-key your SmartKey Security™ locks?
If you have a deadbolt, make sure it is in the locked potion. If you have a knob or lever, make sure it is in the locked position. Ensure your door cannot close on its own, or that you have another way to enter you home. Insert current key. Insert the key that currently operates your lock. Rotate the key 90 degrees clockwise. Insert the SmartKey tool fully and firmly into the SmartKey hole. You may feel the tool click inside the lock. Remove the SmarKey tool. Remove the current key. Insert the new key you wish to use with the lock. Make sure your key is FULLY inserted. The edge of the key touches the indent in the cylinder face. Without pushing or pulling the key, rotate it 180 degrees counter-clockwise. Then rotate they key 180 degrees clockwise. Pull the key to make sure it will NOT come out in this position. Rotate the key 90 degrees counter-clockwise, back to the starting position. Remove your new key. You have successfully re-keyed your lock. Video How to Re-Key Your SmartKey Lock
How to make sure your door is locked?
Ensure your door cannot close on its own, or that you have another way to enter you home. Insert current key. Insert the key that currently operates your lock. Rotate the key 90 degrees clockwise.
How to program a symlink keypad?
1. Open the door. 2. Remove battery cover. 3. Press the program button once. 4. Enter new user code. 5. Press lock button. 6. If programming is successful the keypad will flash green once, and you will hear one beep.
How many tests does Kwikset have?
At Kwikset, we put our locks through 50 different strength tests. Each of our deadbolts deliver the tough, strong protection you and your home deserve.
What is a Kwiket deadbolt?
Kwiket' s low profile deadbolts are stylish and secure. With ANSI/SHMA grade 1 security, an all metal construction and a Smartkey Security cylinder these modern beauties are built to protect.
Why do we design locks?
You want security that will stand the test of time and keep you safe. We design our locks to protect against common break-in methods so you can have peace of mind.
How to re-key the Kevo Smart Lock with Kwikset's SmartKey Re-Key Technology?
Kevo Smart Lock includes Kwikset's SmartKey Re-Key technology that allows you to re-key your SmartKey locks as frequently as you wish while maintaining the highest level of security. Video How to Re-Key Your SmartKey Lock
How to use smart key on lock?
You may feel the tool click inside the lock. Remove the SmarKey tool. Remove the current key. Insert the new key you wish to use with the lock. Make sure your key is FULLY inserted. The edge of the key touches the indent in the cylinder face.
How to re-key your SmartKey Security™ locks?
If you have a deadbolt, make sure it is in the locked potion. If you have a knob or lever, make sure it is in the locked position. Ensure your door cannot close on its own, or that you have another way to enter you home. Insert current key. Insert the key that currently operates your lock. Rotate the key 90 degrees clockwise. Insert the SmartKey tool fully and firmly into the SmartKey hole. You may feel the tool click inside the lock. Remove the SmarKey tool. Remove the current key. Insert the new key you wish to use with the lock. Make sure your key is FULLY inserted. The edge of the key touches the indent in the cylinder face. Without pushing or pulling the key, rotate it 180 degrees counter-clockwise. Then rotate they key 180 degrees clockwise. Pull the key to make sure it will NOT come out in this position. Rotate the key 90 degrees counter-clockwise, back to the starting position. Remove your new key. You have successfully re-keyed your lock. Video How to Re-Key Your SmartKey Lock
How to re-key a pin and tumbler Knob?
And all Kwikset pin & tumbler locks can be re-keyed to achieve convenient one-key operation across multiple locks. All you need is a Kwikset Re-keying Kit, a Kwikset key, and a pin & tumbler lock. Video How to re-key a pin and tumbler knob
How to make sure your door is locked?
Ensure your door cannot close on its own, or that you have another way to enter you home. Insert current key. Insert the key that currently operates your lock. Rotate the key 90 degrees clockwise.
How to rotate a key in a keypad?
The edge of the key touches the indent in the cylinder face. Without pushing or pulling the key, rotate it 180 degrees counter-clockwise. Then rotate they key 180 degrees clockwise. Pull the key to make sure it will NOT come out in this position.
Can you rekey a Kwikset lock?
Re-keying a new lock to match an existing Kwikset key is simple and easy. And all Kwikset pin & tumbler locks can be re-keyed to achieve convenient one-key operation across multiple locks. All you need is a Kwikset Re-keying Kit, a Kwikset key, and a pin & tumbler lock. Video How to re-key a pin and tumbler deadbolt
