how to repair lawn edges

^{How to Repair Lawn Edges}

1. Cut Out Damage. Cut out a rectangle of sod around the damaged area. Cut a generous area, or the sod will fall apart as you lift it out.
2. Undercut Sod. Undercut the rectangle with a spade. Try to cut the sod to as even a thickness as possible, with at least 1 in (2.5 cm) of ...
3. Break Up Soil. Lightly fork over the newly exposed soil to break up the surface and to encourage re-rooting. Add soil if necessary and firm well.
4. Turn Broken Edges Inward. Lay the piece of sod again, turning it around so that the broken edge faces inward, and the cut edge aligns with the edge ...
Apply Top Dressing. Fill the hole with top-dressing and work it into the seams to help them knit together. ...
Keep it Neat. To maintain a neat edge, re-cut it whenever it starts looking untidy; this is easiest when the soil is moist but not wet.

How do you fix a broken lawn edger?

Step 1 - Disconnect Power (Electrical Lawn Edgers Only) If your lawn edger uses electricity to power the unit, make sure that you disconnect the power cord from an outlet before attempting to repair it. Step 2 - Remove Gas Tank (Gasoline Powered Units Only) If you use a gas powered lawn edger, use a screwdriver to remove the tank if possible.

Can you repair damaged lawn edging?

Damaged lawn edging is easy to repair when it's a straight section, but curved pieces are more complicated. To maintain a natural curve, replace a long section and take extra care with the splicing.

How to use a power edger to cut grass?

If you want to edge your lawn, start by turning on your power edger and walking with the edger held completely level. If you can, walk on the footpath while you edge and keep your arm steady to make the grass cut much straighter. For best results, work slowly with your edger rather than trying to rush around your lawn.

How do you fix uneven garden edging?

Saw through the edging after removing the soil and mulch on both sides. If the damage is on a curved area, cut farther back to where the edging runs straight so the newly installed piece can make a more natural, graceful curve. Prepare the new edging for installation.

What is the best material to edge a lawn?

deep strips of steel, aluminum or plastic. The metal lawn edging bends easily into smooth, graceful curves and stops the spread of grass roots. However, painted aluminum and steel offer the sleekest, most refined garden edging look because they almost disappear against the grass and garden bed.

What can I use for grass edges?

Re-cut the edges of your lawn in spring with a half-moon edging tool. ... After mowing, trim edges with long-handled edging shears, to cut grass the mower couldn't reach. ... For grass which has grown over onto paths, use a sharp knife to cut the turf and pull pieces away.More items...•

What is the easiest way to edge your lawn?

0:253:58How to Edge Your Lawn - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnother thing you want to keep in mind is always have a sharp edge err sharp. Tools they make themMoreAnother thing you want to keep in mind is always have a sharp edge err sharp. Tools they make them make all the difference in the world.

Should you edge your lawn?

Edging also serves a practical purpose. If left unchecked, grass will grow into landscape beds and over the edges of pavement. Edging creates a root barrier that stops grass from invading. And if you keep up with regular edging it will save you time when you're trimming.

How to restore natural curve?

To restore the natural curve, you need to cut back and splice in a longer section of new edging to replace the existing border from the beginning to the end of the curve. Note: Use this repair for all types of border edging.

Can you repair a curved lawn edging?

Damaged lawn edging is easy to repair when it's a straight section, but curved pieces are more complicated. To maintain a natural curve, replace a long section and take extra care with the splicing.

What is a lawn edger?

A lawn edger is a very convenient tool that makes edging along sidewalks or walkways in your yard much easier. A lawn edger can create a flat, clean edge up against the sidewalk or walkway to make your lawn appear more attractive and look like it was professionally done. However, when your edger is not working the way it should, ...

What kind of blade do lawn edgers use?

Some lawn edgers use a metal cutting blade, while others use a plastic string-like line such as those used on weed eaters. Inspect the blade or line and make sure that it is not physically damaged. If the line spool blade on the edger is damaged, replacing the faulty part may correct your problem.

What to do if cutting wire is not spinning?

If the blade or cutting wire is not rotating or spinning the way it should, check the rotor or line-feeding mechanism on the edger. Make sure that the parts are adequately lubricated and that they spin freely. If the blade or linefeed mechanism is defective, you will probably need to take the unit in for repair at a service center.

What tool to use to cut new edges?

There are a couple of tools you can use to cut new edges. A half-moon edging iron, or. A powered edge cutter. I find a half-moon cutter is best for cutting straight edges. The top edge of the blades is treaded so you can push into the turf using the weight of your foot. It also acts as a depth indicator so you can cut the edges to ...

Why is my lawn turning brown?

More often than not, closed lawn edges are either paths, driveway, fences or walls. During the summer, they can get very hot during the day and they hold onto that heat even when the temperature cools down at night. This cause the soil and the grass at the edges of the lawn to dry out and turn brown.

What is an open edge?

Open edges – these are edges of your lawn which are exposed. Along planted borders for example. Closed edges – are where the edge of the lawn meets another surface. A path, a lawn edging product, mowing strip or driveway. You’ll treat each type of edge slightly differently so we’ll look at caring for them individually.

Can a half moon edger cut wavy edges?

However, a half-moon edger isn’t great at cutting wavy edges. A powered edge cutter works best for me. You simply walk behind and guide it while a spinning blade cuts the edge. The fact that they have wheels makes it very easy to cut curved edges.

Can you roll a lawn mower over a driveway?

Paths and Driveways. If your lawn meets a path or driveway, then chances are, you’ll be able to roll your lawn mower right over it and use it as a mowing strip. However, lawns can easily grow over the edges of a path, creating an undefined, messy edge.

What is the best tool to use to edge a lawn?

When you edge your lawn, you have two options for which tool to use: an electric or gas powered tool, or a manual edging tool . Because you don't have the space to dig out extra mulch or dirt around sidewalks and footpaths, it's best to use a power edger in these situations.

How to cut grass faster?

Walk forward slowly and take your time. Keep holding your tool by the handles straight out in front of you, trying to keep it as steady as you can. Engage your core and keep your shoulders down as you walk forward slowly to cut your grass as evenly as possible. As you learn how to edge your lawn, you’ll pick up speed.

How to edge a tool?

Line up your tool with the spot you’d like to edge, then shove it into the ground with the handle sticking straight up. This will create your edge, so make sure it’s positioned exactly where you’d like your edge to be. If you’re having trouble, use your foot to stomp on the tool and drive it deeper.

Who is the founder of Lawn Love?

This article was co-authored by Jeremy Yamaguchi. Jeremy Yamaguchi is a Lawn Care Specialist and the Founder/CEO of Lawn Love, a digital marketplace for lawn care and gardening services. Jeremy provides instant satellite quotes and can coordinate service from a smartphone or web browser. The company has raised funding from notable investors like Y Combinator, Joe Montana, Alexis Ohanian, Barbara Corcoran and others. This article has been viewed 427,901 times.

Can you use a manual edger on a flower bed?

Flower beds and planters are perfect for using a manual edge because you can afford to take away a little soil or mulch when you edge them. You also won’t spray a ton of grass and dirt around like you would with a power edger or weed wacker. Manual edgers take more time, but you can be more precise with them.

What are stakes for lawn edging?

Stakes for plastic lawn edging are either straight or perpendicular in shape. These are installed in the same way. Note: Stakes help to sturdy the garden bed and edging as the soil moves over time. This way, the edging cannot move any further away from the bed, and the soil will tightly compact it in the trench.

How to make plastic edging less curled?

The sun will warm the plastic and make it less curled, and therefore easier to shape and use. Dig a 3–6 in (7.6–15.2 cm) deep trench around the garden bed. Use a shovel to dig a neat trench around the whole bed where the plastic edging will go.

How to make a pointed tip go through a edging?

Place the stake into the soil so that it is right next to the top of the edging, and the pointed tip is going towards the "V" shape at the bottom. Hammer the part of the stake that is above the soil, to make the pointed tip go through the edging.

Who is the owner of Lawn Love?

This article was co-authored by Jeremy Yamaguchi. Jeremy Yamaguchi is a Lawn Care Specialist and the Founder/CEO of Lawn Love, a digital marketplace for lawn care and gardening services.