Repairing Guides

how to repair leaky delta faucet

by Eveline Morar PhD Published 2 years ago Updated 1 year ago
image

This is how to how to fix a leaking Delta double-handle bathroom sink faucet:

  • Turn off Water to the faucet. Again, you will do this from underneath the sink. Turn off the cold and hot water shut off...
  • Open the faucet to drain out all the water in the hoses and plug off the drain to prevent dropping anything down the...
  • Remove the handles. Look for a hex screw underneath...
  • Install the handle.

Part of a video titled How to fix a leaky dripping Delta faucet - YouTube
0:00
2:11
There's usually a screw it'll either screw off or there's a screw hole on the side as is the case onMoreThere's usually a screw it'll either screw off or there's a screw hole on the side as is the case on this one. So once you remove the handle you'll reveal the valve.

Full Answer

How do you fix a leaky kitchen faucet handle?

Lift the handle straight up to remove it from the faucet stem. You may need to remove a decorative cap from the top of the handle to access the handle screw. Loosen the bonnet nut securing the faucet stem. Use tongue-and-groove pliers or an adjustable wrench to turn the nut counterclockwise. Unthread the nut completely and remove it from the stem.

How do you fix a leaky Aaron Stickley faucet?

Check for Leaking and Reinstall the Handle Aaron Stickley. Turn the water supply back on by opening the shutoff valve (under the sink) counterclockwise all the way until it stops. Check for leaking around the faucet stem. If it leaks, tighten the bonnet nut until the leaking stops; again, be careful not to overtighten.

Is it time to fix that leaking faucet?

Even the smallest of faucet leaks can have a major impact, wasting up to three gallons of water a day. For the sake of your water bill (and our planet!), it’s time to fix that drip. While a plumber is an easy go-to solution, doing it yourself isn’t as daunting as you think.

Can a plumber fix a dripping faucet?

For the sake of your water bill (and our planet!), it’s time to fix that drip. While a plumber is an easy go-to solution, doing it yourself isn’t as daunting as you think. The culprit is usually a failure of the faucet’s seats and springs—rest assured, this is a relatively simple DIY fix. Here’s how.

image

How do you fix a leaky Delta single handle bathroom faucet?

0:004:37Delta Peerless Bathroom Single Handle Faucet Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd just use a small slotted screwdriver and pry off the decorative cover to loosen that set screwMoreAnd just use a small slotted screwdriver and pry off the decorative cover to loosen that set screw you can use 1/8 inch allen wrench or you can get this combo tool and this has 1/8 inch allen wrench.

Why is my Delta faucet dripping?

0:018:33Delta Faucet Dripping from Spout? How to fix it in - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd this is a spring let's get started. Sometimes you can find out whether it's the hot or coldMoreAnd this is a spring let's get started. Sometimes you can find out whether it's the hot or cold faucet that's dripping by simply feeling the temperature of the drip.

How do you fix a Delta faucet with two handles?

1:323:15How To Fix A Leaky Delta Two Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a wrench or channel lock pliers to loosen the bonnet nut make sure to note where the quarterMoreUse a wrench or channel lock pliers to loosen the bonnet nut make sure to note where the quarter term stop is set on top of the cartridge. And use a pair of pliers to grab the top of the cartridge.

How do you fix a Delta single handle faucet?

0:344:06How To Rebuild A Delta Single Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce we have the handle took off we're going to need to open our rebuild kit as it has the tool toMoreOnce we have the handle took off we're going to need to open our rebuild kit as it has the tool to loosen that nut on the top of the faucet. The part numbers gonna be at our b-36.

How do I know what model Delta Faucet I have?

The model number is on all packaging, some faucets, and all installation instructions provided with your faucet. On the packaging, look near the UPC code or the top of the box. On the faucet, a model identification tag has been attached to most models manufactured since 2012.

Are Delta faucets guaranteed for life?

All parts and finishes of the Delta faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns their home.

How do you take apart a Delta faucet?

2:4710:00Delta Faucet Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce we get semi loose. We can set the adjustable wrench down and finish removing the cap assemblyMoreOnce we get semi loose. We can set the adjustable wrench down and finish removing the cap assembly by. Hand. Now that we've removed the cap assembly.

How do you fix a dripping kitchen faucet with two handles?

0:424:49How to Repair a Leaky Two-Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you determine the trouble stem you'll need to turn off the water. Next remove the handle with aMoreOnce you determine the trouble stem you'll need to turn off the water. Next remove the handle with a Philips head screwdriver. So that the stem is visible.

How do you stop a dripping Delta kitchen faucet?

1:125:29How to repair a dripping Delta Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll need a 1/8 of an inch allen wrench to remove this set screw in the handle. This one is reallyMoreYou'll need a 1/8 of an inch allen wrench to remove this set screw in the handle. This one is really tight. So I ended up getting a longer one so I'd get some leverage.

How do I change the O rings on my Delta faucet?

1:022:57How to repair a leaky Delta faucet. - YouTubeYouTubeStart of suggested clipEnd of suggested clipClean off all the old grease. Each package comes with two o-rings slide the first one on the secondMoreClean off all the old grease. Each package comes with two o-rings slide the first one on the second one will slide right over the top of the first one.

How do you change the cartridge on a Delta single handle kitchen faucet?

4:1812:08Delta Single Handle Faucet Cartridge Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipUnder that pull that out and as you can see it's a little. Cover red for hot blue for cold hot onMoreUnder that pull that out and as you can see it's a little. Cover red for hot blue for cold hot on the Left. Blue on the right.

How do you take apart a Delta faucet head?

0:462:21How To Clean a Delta® Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipLikely just that mineral build-up you'll need to remove your spray wand don't worry this is superMoreLikely just that mineral build-up you'll need to remove your spray wand don't worry this is super easy on some faucets you can just remove your spray wand by simply unscrewing it.

How do I stop my faucet from dripping?

0:072:54How To Fix A Dripping or Leaky Double Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe aerator if it won't unscrew soak a towel and white vinegar and wrap it around the aerator toMoreThe aerator if it won't unscrew soak a towel and white vinegar and wrap it around the aerator to help loosen mineral deposits. After an hour gently twist off the aerator.

How do you stop a Delta tub faucet from dripping?

0:013:26How to replace a Delta Cartridge and fix a leaky bathtub faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen just pull the handle off it comes off that easy then there's this housing over the cartridge.MoreThen just pull the handle off it comes off that easy then there's this housing over the cartridge. And that you can just pull right out. And then there's this ring that you can just twist off.

How do I change the O rings on my Delta kitchen faucet?

1:112:57How to repair a leaky Delta faucet. - YouTubeYouTubeStart of suggested clipEnd of suggested clipClean off all the old grease. Each package comes with two o-rings slide the first one on the secondMoreClean off all the old grease. Each package comes with two o-rings slide the first one on the second one will slide right over the top of the first one.

How to access delta faucet cartridge?

To access the Delta faucet cartridge and seats & springs you’ll have to remove the faucet handle & body. Unscrew the delta faucet handle by hand and use an Allen wrench to loosen the set screw that holds the handle body in place. Then remove the faucet handle body and set it aside. Unscrew the stem unit nut with channel locks.

How to check if a faucet is leaking?

Turn the hot water shutoff valve under the sink to the off position (completely to the right). Check to see if the leak is still there. If the leak is gone you know the hot water side of the faucet is the culprit.

Can I put a new seat and spring down into a faucet?

I always put the new seat and spring down into the faucet together as one unit. Just make sure they’re oriented like in the picture below with the wider side of the spring facing down into the faucet.

Can you clean O rings on a cartridge?

As an FYI, one of my readers (Powell Svendsen) was able to clean the O-rings on the cartridge and eliminate a leak coming from the aerator. So you could give this a try before buying a new cartridge unit.

Can you go wrong with Delta faucets?

You can’t go wrong with Delta, Moen, or American Standard. There are so many awesome styles to choose from. Please let us all know which faucet you choose over on prettyhandygirl.com 🙂

Is it easy to save a plumber call?

Very easy and you’ll save a call to the plumber.

Does Delta bathroom faucet have a repair kit?

Wow, what nice tips you have here…the good thing about this Delta Bathroom Faucet is that it has a repair kit, so it is easy to fix it.

How to remove faucet arm from upright shaft?

Gently remove the faucet arm from the upright shaft by pulling upward on it while rotating it.

How to check for leaks in water valves?

Turn on the water at the valves and check for leaks. Start out with the water on cold and on with about half the maximum pressure. If things look OK with the half pressure then turn the cold water on all the way. Again, check for leaks. Once you're sure things are OK, turn on the hot water. ...

How to remove a swivel aerator?

Step 1: Remove old end, aerator (looks like a cap with a little screen), or previous swivel that broke and part is still there; carefully clean the threads. Step 2: Use one layer of Teflon tape around the outer threads. Converter first, then swivel. Hand tighten to be very snug, and do not wrench.

How to remove chrome dome?

Remove the chrome-dome by turning counter-clockwise. You may need to use Channel-Lock pliers to get things moving. Set aside.

How to remove a golf ball from a socket?

Gently remove the ball. Please note the orientation of the ball, cut into one side of the ball is a slot that rides on a stud inside the socket.

Where to get replacement water cartridges?

You can get the replacement cartridge from any big box hardware store.

How to fix Allen wrench that won't remove?

Spray it with PB Blaster and let set, then spray again. Make sure the Allen wrench is secure and turn outwards to the left. If you still can't remove it, then replace it.

How to stop a faucet from leaking?

Investigate the cap and adjusting ring by taking a good look. If the faucet seems to be leaking from there, try tightening the adjusting ring with needle-nose pliers. If that doesn’t stop the leak, you’ll need to replace the faucet’s seats and springs.

How long does water run in a faucet?

The water needs to run for one minute. For kitchen & bathroom faucets, be sure to put a bucket upside down over top of the faucet in order to direct the water down to the sink, or water will spray everywhere. Turn the water off at the supply lines again before re-assembling. 8.

Do you need an adjusting ring for a faucet?

Depending on the age of your faucet, you may not have an adjusting ring. For those with newer faucets that don’t contain adjusting rings, please skip this step. If you have an older faucet with an adjusting ring, it will not be needed after the repair if the cam/packing is replaced.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9