Little Known Repair Tips for Your Metal Detector
- Non-functioning search heads If you have a non-functional search head, try to analyze the condition. Check for any mud or dirt sticking on your metal detector's search head. ...
- Store your batteries when not in use In order to avoid any battery-related problems with your metal detector, it is best to stash them in the "fridge" when not ...
- Turn it off Always turn off your metal detector before repairing it. This is to avoid any further dilemma. ...
- Find a reliable repair shop
Full Answer
Can you fix a metal detector without damaging it?
Indeed, you can fix or repair your metal detector without having to spend hundreds of dollars on repair charges or lengthy restoration, thereby, curbing your metal detecting. “…Just try to remember these repair tips for your metal detector and you will surely solve the minor problems without the mess…”
What is a metal detector?
Metal detector is a portable electronic device that penetrates the Earth’s magnetic field to find traces of minerals. This metal can be either neglected pieces of aluminum or the value of the coins, jewelry and other buried treasures.
How to fix a metal detector search head that won't work?
If you have a non-functional search head, try to analyze the condition. Check for any mud or dirt sticking on your metal detector's search head. If it is full of dirt, try to clean it up with a WD40. Squirt the dirt out by applying the solution abundantly on the bottom and top of the search head. It will be much easier now to remove the mud.
How do I Keep my metal detector batteries from dying?
In order to avoid any battery-related problems with your metal detector, it is best to stash them in the "fridge" when not in use. By doing this your batteries will last longer. However, remember to place them on a lukewarm "radiator" an hour before you start metal detecting. This will give your batteries the opportunity to revive their functions.
How do you fix a metal detector coil?
3:0314:56Repair of metal detector coil with broken ears - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd make it fit the other thing I'll have to do is just remove some of this excess glue just aroundMoreAnd make it fit the other thing I'll have to do is just remove some of this excess glue just around here look at moments a bit of a lump. So I want this to be flush.
How can I make my metal detector work better?
To increase the depth of a metal detector, you can:sweep the coil close to the ground.increase the sensitivity setting.reduce the discrimination setting.install fresh batteries.upgrade to larger coil.
Can metal detectors fail?
Unfortunately, it can happen that detectors erroneously identify metal where there is none, leading to the destruction of good products. The metal detector is not always the source of error, some problems can be easily and inexpensively remedied.
Why does my metal detector keep beeping?
The most common reasons your metal detector beeps too often are: Low batteries. Moisture in cable connections or control box. Bad coil.
Why won't my metal detector detect gold?
Metal detectors are electromagnetic devices, and as such can detect items that are conductive and non-magnetic, like gold, or non-conductive but magnetic, like magnetite. Or both, like metallic iron. When dealing with gold you are dealing only with conductivity.
Does aluminum foil block metal detectors?
The post office uses x-rays, which are blocked by aluminum foil. Metal detectors are not likely to detect aluminum foil, however. If you use X-rays, then you will see a big blank spot in the suitcase, and you will be forced to open it. So you can't cover something else with aluminum foil at the airport.
How do you test a metal detector?
simply place the metal test piece in or through the aperture without the product. For most third party audits, testing without product will result in non- compliance and, even worse, could allow metal to pass undetected during production.
Does electrical tape stop metal detectors?
Phones hidden in body cavities can't always be picked up by traditional metal detectors, and many are wrapped in electrical tape to further avoid detection.
Who makes the best metal detector?
Over 30 hours of hands-on testing with seven top products priced under $250, we found the Garrett – Ace 250 to be the best metal detector in every category we tested. The Ace 250 is superior when it comes to locating coins, relics and gold, both in the sand and in the water.
How do you test a metal detector coil?
2:1915:14How to Test Whites Metal Detector Coil Frequency 5900/di MXT All ProYouTubeStart of suggested clipEnd of suggested clipSo for the test I'm simply gonna put the search coil. On top of my coil. Now we're gonna adjust itMoreSo for the test I'm simply gonna put the search coil. On top of my coil. Now we're gonna adjust it back and forth for maximum amplitude. And we'll take a look at the analyzer.
What will throw off a metal detector?
Below are the most common causes of false metal detector signals. Footwear with metal accents. Steel-toed boots are a common culprit and even the metal eyelets in shoelaces can set off your detector. Diggers and other metal objects.
What causes a metal detector to go off?
When the field strikes that . 38 special in your pocket, there is generated a tiny electrical current, which produces a radio signal, which is picked up by the detector's antenna. The signal is amplified and analyzed, then, maybe, the alarm goes off.
Can you upgrade a metal detector?
Upgrade Your Detector with a Powerful New Search Coil! You can “soup up” your metal detector just by adding a more powerful search coil! The Detech 15 x 12″ SEF Butterfly Search Coil will give you MUCH deeper depth and better pinpointing than a standard 8″ search coil.
How do you calibrate a metal detector?
1:035:46How To Set Up And Calibrate A Metal Detector - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd set up sensitivity of the machine a metal detector needs to be calibrated at the beginning ofMoreAnd set up sensitivity of the machine a metal detector needs to be calibrated at the beginning of the shift. One to two hours into production depending on recommendations from the supplier.
What is the best frequency for metal detectors?
The best frequency for metal detecting is somewhere in the range of 5 kHz to 15 kHz. This range is where most general-purpose metal detectors are tuned too, and also the easiest to manage for beginners.
What is sensitivity on a metal detector?
Metal detector sensitivity is defined as: The smallest diameter sphere that can be detected, 100% of the time, at the weakest spot in the detector aperture. The metal detector's sensing field is weakest at the geometric center of the opening.
What to do if your metal detector is non functional?
If you have a non-functional search head, try to analyze the condition. Check for any mud or dirt sticking on your metal detector's search head.
How to keep a metal detector from mud?
By keeping your metal detector's search head and wellies free from mud you can use them for a longer period of time. 2. Store your batteries when not in use. In order to avoid any battery-related problems with your metal detector, it is best to stash them in the "fridge" when not in use.
Can you fix a metal detector?
This way you avoid spending more on repair charges. Plus, you can be sure that your metal detector is in good hands. Indeed, you can fix or repair your metal detector without having to spend hundreds of dollars on repair charges or lengthy restoration, thereby, curbing your metal detecting.
Expert Service for Every Stage of Your Metal Detector's Life Cycle
Our team of professionals have decades of Inspection experience and offer a full menu of services for your processing line’s metal detectors to help you reach maximum up-time while maintaining accuracy and efficiency.
Get In Touch
Call us at (559) 862 – 1400 or use the form below to contact us 24 hours a day, 7 days a week.
