how to repair moen shower handle

What To Do If Your Moen Shower Handle Sticks Out

1. Get Your Moen Shower Valve Ready. The Moen shower valve requires some preparation work. ...
2. Insert The Valve In. Your wall should already be exposed because this is a rough-in. ...
3. Tighten Up The Joints. Now, carefully solder each of the joints that are connected to the shower valve. ...
4. Re-insert The Cartridge. ...
5. Install The Handle. ...

Full Answer

How do I remove a stuck shower faucet handle?

You can remove a stuck faucet handle using three methods:

• Removing lime or scale deposits
• Getting rid of corrosion
• Applying oil and force

How to fix or install a shower door handle?

For a single handle:

• Firstly, you will need to remove the end cap. This is simply the small piece of metal that sits on the inside surface of the door, holding the handle in ...
• Initially, the end cap will probably be too stiff to loosen by hand so we would recommend that you use a set of pliers. ...
• With the end cap removed the handle will simply slide out of the hole.

How to remove Moen bathtub faucet handle?

How to Remove Moen Bathroom Faucet Handle

• Step#1: Turn off the water supply. Turn off your water supply before you start the process of removing your Moen bathroom faucet handle.
• Step#2: Find where the handle connects to the escutcheon. This step involves finding where your faucet handle connects to the escutcheon, which is the base of the deck plate.
• Step#3: Use a wrench. ...

How to adjust Moen kitchen faucet handle?

• Turn off the water shutoff valve under the sink.
• Unscrew the handle screw and remove the handle.
• Loosen the valve retaining nut but don't remove it.
• Replace the handle without the screw and try pushing it in the direction you need it to go. ...

More items...

Why does the shower handle break?

Why is my shower turning left to right?

Can you remove a shower handle that fell off?

Can a shower handle be loose?

How do you take apart a Moen shower handle?

0:001:37Remove Shower Handle - Moen Shower Handle - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor a mowing handle a 7 64 hex is a common size after removing the set screw i used a rubber malletMoreFor a mowing handle a 7 64 hex is a common size after removing the set screw i used a rubber mallet to help loosen the handle remove the handle.

How do you fix a Moen single handle shower faucet?

0:299:09How to Repair a Moen Shower Faucet Step-by-Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I'm going to show you how easy it is to install it these are for single handle faucets. And youMoreAnd I'm going to show you how easy it is to install it these are for single handle faucets. And you can pick these up at a home depot or any other hardware store like that.

How do you fix a loose Moen shower handle?

0:171:17Fix loose shower handle - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo now just come in with your phillips screwdriver your cross point screwdriver. And you don't wantMoreSo now just come in with your phillips screwdriver your cross point screwdriver. And you don't want to tighten this too much or it'll be hard to turn the faucet handle. So just snug it back up until.

How do you fix a shower handle that won't turn?

Pull the handle off. If the handle is stuck, try to add lubrication or use a flat-head screwdriver to try and pry it out little by little. Leak Geeks also suggests you use plumber's grease. If all else fails, purchase a handle puller from a hardware store.

How do you reattach a shower handle?

0:161:30How to fix a loose shower handle - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat I'll do first is take an Allen wrench and tighten the screw to make sure it will threadMoreWhat I'll do first is take an Allen wrench and tighten the screw to make sure it will thread properly through the shower handle.

Why is my Moen shower handle loose?

Loose handle: The shower handle can slowly loosen over time and create additional friction that can then wear out the shaft at the point where the handle grips the stem of the cartridge. If you feel the shower handle getting loose, pop off the screw cover and tighten the handle screw.

How do you tighten a loose faucet handle?

0:523:46How To Tighten A Loose Faucet Handle-Step By Step TutorialYouTubeStart of suggested clipEnd of suggested clipSo I always just recommend using your fingernail. As. You can see my fingernails are not long by anyMoreSo I always just recommend using your fingernail. As. You can see my fingernails are not long by any means. So you don't really need a long fingernail to do it. But get your fingernail under the lip.

How do you tighten a single handle faucet?

0:043:47Tighten Loose Faucet Handle and base - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you'll need something like a swiss army knife or a small screwdriver. And right in the back ofMoreSo you'll need something like a swiss army knife or a small screwdriver. And right in the back of the handle. You'll find this tiny little cap and you're just going to very carefully pop it out.

How do I fix a single handle shower faucet?

0:002:38Repairing a Leaky Single Handle Tub/Shower Ball-Type FaucetYouTubeStart of suggested clipEnd of suggested clipTurn off the main water supply to your home. For an obstacle remove the index button by prying offMoreTurn off the main water supply to your home. For an obstacle remove the index button by prying off with the screwdriver. Then unscrew the handle screw. And remove the handle.

Why is my shower faucet not turning on?

If your shower won't turn on or if you only get either hot or cold water, it likely means you have a broken valve. Faulty valves can also cause your shower handle to get stuck or make odd grinding sounds. If the valve breaks and the broken part blocks its opening, you'll have low water flow or pressure.

Why is my Moen shower handle so hard to turn?

Typical Cause This is usually caused by (but not limited to) sediment or debris in the cartridge, mineral buildup or a damaged seal within the cartridge. If the handle is loose it may not be installed properly or there may be an issue with the handle mechanism.

How do I change a Moen cartridge?

1:213:14How to Remove & Install the 1222 Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure the cartridge is in the on position the notch in the stem should be facing up remove theMoreMake sure the cartridge is in the on position the notch in the stem should be facing up remove the cartridge from the valve. You can also use the Moen cartridge removal tool to pull out the cartridge.

How do you disassemble a Moen adjustable shower head?

1:056:21How to Disassemble and Clean a Moen Shower Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimple this piece comes out through the back you got to pop that off it's fairly simple i just pushMoreSimple this piece comes out through the back you got to pop that off it's fairly simple i just push it flat against the counter.

How do you put a shower diverter back together?

0:161:17Shower Repair : How Do I Repair the Diverter in a Shower? - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat you'll take your new one once you get the new one it slides into place use that same allenMoreThat you'll take your new one once you get the new one it slides into place use that same allen wrench lock that screw back in place now on a three handle tub and shower valve.

How do you change a Moen shower cartridge?

1:213:14How to Remove & Install the 1222 Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure the cartridge is in the on position the notch in the stem should be facing up remove theMoreMake sure the cartridge is in the on position the notch in the stem should be facing up remove the cartridge from the valve. You can also use the Moen cartridge removal tool to pull out the cartridge.

How do I know which Moen shower valve I have?

Look closely at the handle buttons that were attached to the shower valve. Typically, "Moen" will be written in the middle of the "Hot" and "Cold" buttons. If you do not see this, the handle buttons have been replaced, or the "Hot/Cold" button is a lever (wall escutcheon).

Why does the shower handle break?

The shaft can break from normal wear and tear, but it can also break because the cartridge became too stiff, requiring force to operate.

Why is my shower turning left to right?

If you have a hard time turning the water on or turning it from left to right, it is an indication that the cartridge is too stiff. When this happens you should replace the Moen cartridge. Otherwise replacing the shower handle will be a temporary fix, and you may be replacing it again soon.

Can you remove a shower handle that fell off?

If the shower handle just fell off, removal is not necessary: you just install a new handle. Often, though, some pieces will be attached to the cartridge stem, requiring you to take them off.

Can a shower handle be loose?

Before going to full replacement of the handle, consider these two possibilities: Loose handle: The shower handle can slowly loosen over time and create additional friction that can then wear out the shaft at the point where the handle grips the stem of the cartridge. If you feel the shower handle getting loose, ...

What is a Moen shower valve?

Moen pressure-balance shower valves are designed so they sense hot and cold water pressure and keep them in balance, preventing the shower from sudden surges of hot or cold water. When the shower valve begins leaking or fails to correctly balance the hot and cold water, fixing the problem is usually a simple matter of replacing the insert cartridge.

How to remove a Moen faucet?

Unscrew the black plastic handle adapter with a Phillips screwdriver and pull it straight out. Pull the two white plastic pieces (the temperature-limit stop kit; not all Moen faucets have these) straight out, keeping the two pieces together so you don't loose the temperature setting. Grip the chrome sleeve and pull it straight out. This will expose the retaining clip that holds the cartridge in place.

How to put a H C cartridge in a valve?

Insert the cartridge into the valve body so that the "H C" marking on the face of the cartridge is on top (hot is on the left and cold is on the right). Push in the cartridge as far as it will go. Use the plastic adapter that comes with the new cartridge to help position the cartridge and push it into the valve body.

How to use a Moen cartridge puller?

To use the tool, fit it onto the end of the cartridge and thread the puller screw into the end of the valve stem (the same part that accepts the valve handle). Make sure that it goes in straight and is not cross-threaded.

How to remove cartridge retaining clip?

Note the location of the cartridge retaining clip; you much reinstall it the same way after the new cartridge is in place. Use needle-nose pliers to grip the top of the clip and pull it straight up to remove it. Set the retaining clip aside; you will use it with the new cartridge.

How to drain water from a house with no water shut off valve?

Drain any water remaining in the pipes by turning on the faucet. If you had to turn off the water at the main house shutoff, then open the lowest faucet in the home to drain the pipes.

How to turn down the temperature of a scald guard?

To turn the water temperature down, move the outer white piece to the right to limit the hot water. The number of splines you move will depend on how much restriction you want.

Why Is Moen Shower Handle Sticking Out?

There are two reasons why your Moen Shower Handle may stick out. One might be because the valve wasn’t placed properly on the wall.

What To Do If Your Moen Shower Handle Sticks Out?

To fix this, you have to rip out the whole finished wall and install the shower faucet again. The entire procedure has been split down into five steps. Take a look at it-

Conclusion

Now you know what to do if your Moen shower handle sticks out too far. Make sure to follow our instructions properly!

Why does the shower handle break?

The shaft can break from normal wear and tear, but it can also break because the cartridge became too stiff, requiring force to operate.

Why is my shower turning left to right?

If you have a hard time turning the water on or turning it from left to right, it is an indication that the cartridge is too stiff. When this happens you should replace the Moen cartridge. Otherwise replacing the shower handle will be a temporary fix, and you may be replacing it again soon.

Can you remove a shower handle that fell off?

If the shower handle just fell off, removal is not necessary: you just install a new handle. Often, though, some pieces will be attached to the cartridge stem, requiring you to take them off.

Can a shower handle be loose?

Before going to full replacement of the handle, consider these two possibilities: Loose handle: The shower handle can slowly loosen over time and create additional friction that can then wear out the shaft at the point where the handle grips the stem of the cartridge. If you feel the shower handle getting loose, ...