Repairing Guides

how to repair sata hard disk not detected

by Eliane Gislason Published 2 years ago Updated 2 years ago
image

  1. Shutdown the old computer and remove the computer case with its ATA/SATA cable and power cable.
  2. Open the new computer or laptop case.
  3. Locate the hard drive slot and insert the hard drive into the slot.
  4. Reconnect the hard drive as the second HDD on the computer via the ATA/SATA cable and power cable.
  5. Restart the laptop or computer to check if the hard drive shows up.

Unplug the hard drive which fails to be recognized by Windows BIOS, and remove the ATA or SATA cable and its power cable. If the ATA or SATA cable and the power cable are broken, change to a new one. If the cables are covered by dust, clear the dust.

Full Answer

How to fix ATA/SATA hard drive not detectable?

1 Method 1. Update Hard Drive Drivers to Make ATA/SATA Hard Drive Detectable. ... 2 Method 2. Initialize ATA/SATA Hard Drive to Make It Detectable. When hard drive especially new hard drive doesn't get initialized, it is unusable for users to install programs or save ... 3 Method 3. Check Drive Spinning up or Not. ...

What to do if your hard drive is not detected?

Method 1. Check if Disk Is Connected Properly. a. It's important to double-check the connections from your hard drive to the PC. Ensure that the cables connecting the hard drive to the power supply or motherboard are in place. If data cables are switched or misplaced, the system cannot detect the hard drive.

How to fix hard drive not recognized in Windows 10?

Quick Fix 2. Turn on and Enable ATA or SATA Hard Drive in BIOS If your hard drive is a new disk and connected as a second drive in PC, it won't be recognized by PC till you enable it in BIOS: Enter Setup and check system documentation to see whether the not detected hard drive is turned Off in System Setup or not;

How to fix HDD not detected in BIOS error?

Applies to: Fix HDD not detected in BIOS error directly by enabling hard disk in BIOS. Step 1. Shut down the PC and restart the PC and press F2/F8/F11 or Delete to enter BIOS. Step 2. Enter Setup and check the system documentation to see whether the undetected hard drive is turned Off in System Setup or not.

image

How do I fix a SATA hard drive not detected?

Therefore, you can try below two ways to make computer detect and read your ATA or SATA hard drive right away:Reconnect the hard drive with the data cable port or connect ATA/SATA hard drive to another new data cable in PC;Connect the hard drive with another desktop/laptop as a second HDD;

What is the problem if the hard disk is not detected?

The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect. Serial ATA cables, in particular, can sometimes fall out of their connection. Be sure to check your SATA cables are tightly connected to the SATA port connection.

Can I repair hard disk?

If the hard drive is inaccessible, TestDisk is a program that can repair it. Though challenging to use due to its scanty interface, this free little tool proves itself to be a powerful tool to save your hard drive. Alternatively you can use Ontrack EasyRecovery with its SMART tools.

How do I enable SATA ports in BIOS?

To Set the System BIOS and Configure Your Disks for Intel SATA or RAIDPower on the system.Press the F2 key at the Sun logo screen to enter the BIOS Setup menu.In the BIOS Utility dialog, select Advanced -> IDE Configuration. ... In the IDE Configuration menu, select Configure SATA as and press Enter.More items...

Why is my ATA hard drive not detecting?

A glitch in power or spin can easily be detected by following specific steps: Switch off the computer. Remove data cable from the hard drive.

How to check if your hard drive is damaged?

Switch off the computer. Remove data cable from the hard drive. Switch on the computer and see whether the hard drive is spinning or not. You can also touch at the side of the hard drive to check for a slight vibration and humming sound. Faulty/damaged hard drive.

What is a hard drive?

Summary: A hard drive is one of those data storage devices, which often comes to us with caution – to be handled with care. While physical damage to a hard drive costs wealth, the loss of important data saved on it affects the peace of mind. Therefore, among all problems faced with ATA or SATA hard drives of computers or laptops, ...

When an electronic device or a part of it is not working, the first step should always be to check for proper?

When an electronic device or a part of it is not working, the first step should always be to check for proper power connection or fault in cables. Sometimes, it’s hard for us to detect a problem with data cables even if there is.

Can a secondary ATA drive be detected in BIOS?

Note: New or secondary ATA/SATA hard drive will not be detected in BIOS until auto-detection is enabled.

Why is my hard drive not detected?

If the hard disk is not detected, it could be because it is turned off in the system setup. There are mother manufacturers that tend to disable the unused ports in the BIOS by default. One has to enter the BIOS to verify their current status. If a second hard disk is not detected after being connected, it could require to be enabled by turning it ...

Why is my hard drive not spinning?

The hard disk is not detected as the drive is not spinning up. This can arise when the drive is not receiving enough power to function and hence doesn't spin up. You can check for this issue by performing the following steps: Power Off the computer. Access the computer case and remove the data cable from the hard drive.

What is an ATA port?

Generally, an ATA or SATA port is set to auto-detect. If one finds that their hard disk is not detected by the system BIOS, the following steps (not in any particular order), can be used to isolate the issue. Part 1:Hard Drive Is Not Enable in the BIOS.

Why switch power cables with a device like an external CD or DVD?

Switching power cables with a device like an external CD or DVD to ensure that the cable is not faulty.

Why create a bootable disk?

Create a bootable disk to help you regain data from a crashed computer.

What to do if playback doesn't begin?

If playback doesn't begin shortly, try restarting your device.

How to stop power saving commands?

Access the computer case and remove the data cable from the hard drive. This will ensure that any of the power saving commands that are being sent out is ceased.

What happens if your hard drive is not recognized?

But if the hard drive is still not recognized, it may have other issues. Or, if the hard drive shows up but you cannot access the data, don't worry. You can move on and try the advanced fixes to get this issue resolved.

Why won't my BIOS detect my hard drive?

BIOS will not be able to detect a hard disk when the hard drive data cable is damaged or improperly connected . If the serial ATA or SATA drivers are not properly installed, hard disk is not enabled in BIOS, hard drive keeps spinning up, or the hard drive is corrupted, failing or dying, BIOS may also fail to recognize your hard disk. ...

How to find lost files on USB drive?

When you boot from the USB, you can run EaseUS Data Recovery Wizard from the WinPE bootable disk. Select the drive you want to scan to find all your lost files.

What to do if ATA cable is broken?

If the ATA or SATA cable and the power cable are broken, change to a new one. If the cables are covered by dust, clear the dust.

How to fix a broken ATA cable?

Shut down your PC at first. Step 2. Open your computer cases and remove all the screws with a screw driver. Step 3. Unplug the hard drive which fails to be recognized by Windows BIOS, and remove the ATA or SATA cable and its power cable. If the ATA or SATA cable and the power cable are broken, change a new one.

What to do if Windows doesn't find a new driver?

If Windows doesn't find a new driver for your drive, try to find the latest one on the device manufacturer's website.

How to create a bootable disk on Windows 10?

Connect the USB drive to PC, launch EaseUS Data Recovery Wizard WinPE Edition. Select the USB drive and click "Create" to create a bootable disk.

What to do if your hard drive is broken?

Note: If your hard drive is physically damaged or broken, send it to a local repair center or its manufacturer for repair. Fixes that are shown below only work to fix logical errors that prevent your drive from showing up on computers.

What happens if your hard drive is disabled in BIOS?

If the hard drive is disabled in BIOS, the OS won't be able to detect it, not showing up in Windows. Hence, checking whether your hard drive is disabled in BIOS is also necessary.

Why is my hard drive not showing up in File Explorer?

Applies to: Fix hard drive not showing up in File Explorer, hard disk has a yellow exclamation mark in Disk Management. If your hard drive has a yellow exclamation mark in Disk Management under the Disk Driver section , it means that the drive driver is outdated. As a result, the hard drive will neither show up in Windows File Explorer ...

Why is my hard drive unallocated?

If a used hard disk suddenly becomes unallocated, it could be due to accidental deletion, virus attack, or other unknown reasons that cause partition loss on your disk. In this case, you should recover data from the unallocated space first. And then, create a new volume (s) on the disk to make the hard drive show up.

How to make a new hard drive show up in BIOS?

Most of the time, if your hard drive is a brand new disk, you need to initialize it first. Then, create a new partition on it and enable it in BIOS. By doing so, you'll make your new hard drive showing up on Windows 11/10/8/7.

Why won't my external hard drive show up in File Explorer?

When the external hard drive has an outdated drive driver, it won't show up in File Explorer. It appears with a yellow exclamation under the Disk driver section.

What does it mean when your hard drive is RAW?

When your hard drive is displaying as RAW, or it shows as "*Others" in Disk Management, it means that your hard drive contains a file system error.

Why is my SSD not showing up?

The drive letter of the SSD is missing or conflicting with another disk can result in SSD not showing up. You can fix this issue by manually assigning the SSD a new drive letter in Windows Disk Management.

Why is my hard drive not working?

A hard drive malfunction may be caused by faulty wiring or damaged ports. Connect your hard drive to another SATA port on the PC's motherboard. If after doing this, the hard drive remains undiscoverable, the problem may be on the cables. You can try replacing old cables with new ones and check to see if the drive is now listed as a connected drive.

Why won't my hard drive show up?

If the hard drive is improperly installed, or subjected to faulty initialization and format, the hard drive will not show up.

How to open disk management?

1. First, you need to open “ Disk Management ” tool. You can press Win + X and choose the Disk Management selection, or press Win + X and enter “ diskmgmt.msc in the run box.

What happens when you plug in a new hard drive?

For example, when you plug in a new hard drive, it will automatically perform the necessary actions to integrate the new device into other components of the system. However, it does not follow that this process is invulnerable— sometimes, the system fails to detect the hard drive . Part 1.

Can you run hardware troubleshooter on a not recognized hard drive?

Running the hardware troubleshooter can fix quite a few issues on Windows, including not recognized hard drive issue. Follow the below steps:

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9