- Turn Off the Water. Remove the tank lid and set it aside. Close the shutoff valve that is located on the wall or floor near the toilet.
- Disconnect the Old Toilet Handle. Unhook the flapper chain from the lever. ...
- Remove the Old Flush Handle. Slide the nut down the length of the lever. Work the lever out through the hole in the tank. ...
- Install the New Flush Handle. In most cases, the handle is already attached to the lever arm. ...
- Connect the Flapper Chain. Attach the chain to one of the holes in the lever. There should be about 1/2 inch of slack in the chain.
How does a toilet flush lever work?
The toilet flush lever is often located on the left side of the toilet tank. When you push the flush lever or handle, the chain that is connected to it lifts the flapper valve it is connected to on the other end and flushes the toilet.
How do you fix a toilet that won't flush?
Another very easy problem to fix is when the flush handle becomes loose or disconnected from the rest of the tank. It usually requires one of two solutions: Reconnect the lift wire or lift chain that connects the lift arm from the flapper.
What are the most common toilet problems to fix?
One of the most common toilet problems is a broken flush lever yet it is also one of the easiest toilet problems to fix. The toilet flush lever is often located on the left side of the toilet tank.
How do I know if my toilet flush lever is broken?
The warning sign that the lever is broken is when it stops functioning properly and would not flush. However, replacing the flush lever is just one of the problems in the bathroom that you can do yourself.
How do you fix a broken flush handle?
0:141:42How To Replace A Broken Flush Handle - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's usually made of plastic unscrew. The nut that holds the handle in place this. Can be a bitMoreIt's usually made of plastic unscrew. The nut that holds the handle in place this. Can be a bit tricky as this nut is reverse threaded which means you must turn it clockwise to undo remove the handle.
Why is my toilet lever not working?
Look inside the bowl for a wire or chain that leads from the flapper up to the trip lever. The chain may have just disconnected from the lever, from the flapper, or the lever or chain may have broken. If there is a break, you can check to be sure everything else is all right by physically raising the flapper.
Are flush levers universal?
Choosing a Toilet Handle Another way to get the type of handle you need is to purchase one from the manufacturer of your specific toilet. There are also universal handles that will fit almost any toilet, no matter what type of tank lever you currently have.
How do you fix a flush valve?
To fix a one-piece flush valve that has the float and flapper integrated into the valve assembly, follow these steps:Step 1: Turn off the Water Supply. ... Step 2: Flush and Get Rid of Excess Water. ... Step 3: Unscrew the Flush Valve. ... Step 4: Replace the Flush Valve. ... Step 5: Reconnect the Water Supply and Check for Leaks.
How to tell if toilet flush lever is broken?
In other instances, the lever can fall apart from corrosion. The warning sign that the lever is broken is when it stops functioning properly and would not flush. However, replacing the flush lever is just one of the problems in the bathroom that you can do yourself. With an adjustable open-end wrench and the toilet lever kit you can get from the local hardware store, you can fix this minor toilet problem. You can also choose between plastic and brass. When you purchase the kit, ensure that it comes with the flush handle, tank lever and the tank lever nut. Here is a step-by-step guide to replace the toilet flush lever.
Where is the flush lever on a toilet?
The toilet flush lever is often located on the left side of the toilet tank. When you push the flush lever or handle, the chain that is connected to it lifts the flapper valve it is connected to on the other end and flushes the toilet. However, minor problems can happen in time.
How does a toilet flush valve work?
Integrated into the flush valve is a vertical overflow tube that extends up into the tank from the base of the flush valve. The role of the overflow tube is both to prevent water from overflowing the tank, and also to allow a small amount of water to flow down into the toilet bowl as the tank is refilling. A small refill tube placed into the top of the overflow tube allows a small stream of water to flow down into the bowl during the refill cycle. This restores the level of standing water in the toilet bowl, keeping the trap sealed.
What is the function of a flapper in a toilet?
The flapper or float ball seats against the val ve opening and keeps water in the tank until the flush handle is operated. When the handle is depressed, a chain or lift wire connected to the handle rod lifts the flapper away from the valve seat and allows the water to flush down out of the tank and into the toilet bowl.
How does a fill valve work?
Whatever the design, the fill valve works to automatically open the water supply valve when the water level falls in the tank during a flush, then shuts off automatically when the water level rises to a specific level in the tank. Depending type of design, the valve is operated either by a floating ball or a float cup that moves up and down with the water level in the tank. Floatless fill valves operate by sensing water pressure at the bottom of the tank.
Why is my toilet running?
The problem occurs either because the flapper is not seating itself correctly in the opening of the flush valve, or because the water level in the tank is too high and allows water to flow over the top of the overflow tube and down into the tank.
How does a toilet tank work?
The toilet tank's function is to hold a quantity of water until you flush the toilet, at which time the water in the tank rushes down through an opening in the bottom of the tank and into the bowl, forcing waste out of the bowl and into the home's drain and sewer lines. There are two major components in the tank ...
How does a floatless fill valve work?
Floatless fill valves operate by sensing water pressure at the bottom of the tank.
What is the bowl of a toilet?
Your home toilet consists of two major parts: the bowl unit that rests on the floor, and the upper tank that holds the water that is released each time you flush the toilet. The bowl is little more than a solid piece of porcelain drain fixture with no moving parts at all. With only a few exceptions, there aren't many repairs that involve the bowl.
