How To Repair A Broken Toilet Seat Hinge
- Remove The Seat. First, remove the seat assembly. To do this you’ll need a Phillips screwdriver and pliers. Lift the lid...
- Purchase A Cheap Toilet Seat. Replacement hinges are expensive, often $30 or more per set. A replacement oak seat...
- Secure The New Hinges To The Seat. Mount the hinges onto the stool and secure them firmly,...
How do you replace a toilet seat hinge?
- Lower the seat and locate the two screw covers at the back of the seat.
- Put the flat-head screwdriver in the screw slot and hold it steady while you unscrew the nut from underneath the bowl.
- Remove the nut and bolt and take the seat off the bowl.
How to replace your toilet seat hinges?
Replacing the Hinges
- If there is a main pin connected to the hinges, you need to remove that as well. ...
- Place it in the middle of the pin and strike the end with the hammer; the pin should come out without any tension.
- Next, place the mouth of the pliers on the pin. ...
How to clean the hinges on a toilet seat?
- Spray the outside of the toilet with a disinfectant bathroom cleaner and let the cleaner sit for a couple minutes, or as recommended by the manufacturer.
- Starting with the tank or top, wipe down the back, front and sides of the toilet all the way to the floor.
- Clean the toilet handle with a disinfecting wipe.
How to remove the screws on a toilet seat?
Removing Seat with No Screws
- Gather the things you’ll need – hacksaw, protective wear, duct tape, rugs, and any knife.
- Open the toilet lid and cover the remaining part of the toilet with duct tape. ...
- Mark the areas you will be cutting through and sit the knife right underneath the toilet seat to guide you as you cut through.
- Begin to cut gently moving one side to the other. ...
Are toilet seat hinges replaceable?
Over time, these hinges can break or wear out, requiring replacement. If your toilet seat hinges are broken or stripped out, you do NOT need to change the whole toilet seat, but instead only the hinges. With the right tools and spare parts, you can easily replace your toilet seat hinges.
How do you put a toilet seat back on a hinge?
0:571:37Hinge and Damper Replacement - Quiet-Close Toilet Seats - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the hinge assembly is secured to the toilet seat snap the bottom cover of the hinge assembly backMoreSo the hinge assembly is secured to the toilet seat snap the bottom cover of the hinge assembly back into place finally snap the toilet seat back into place close the cover caps and you're done.
How do you fix a toilet seat fitting?
0:000:52How to fit a toilet seat - fitting guides from VictoriaPlum.com - YouTubeYouTubeStart of suggested clipEnd of suggested clipMost seats are fixed at the rear of the panel like this take out the old fixings. And clean the areaMoreMost seats are fixed at the rear of the panel like this take out the old fixings. And clean the area install the seal kit onto the new seat. And select the corresponding holes that will fit your pan.
How do you fix a toilet hinge?
0:351:24How to fix a loose toilet seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen I'll do the same step on the plastic bolt on the other hinge. Once the bolts are tight I'llMoreThen I'll do the same step on the plastic bolt on the other hinge. Once the bolts are tight I'll snap back on the hinge covers. And I'm done the toilet seat is secure.
How do you fix a swinging toilet seat?
0:193:08How to Fix a Loose, Wobbly Toilet Seat for GOOD! - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay the way it works is you take the toilet bolt nut you place it just like that design the HoldemMoreOkay the way it works is you take the toilet bolt nut you place it just like that design the Holdem nut in place. While you tighten down the bolt. So let's do it I've got a screwdriver.
Can soft close toilet hinges be repaired?
Tip: If your soft-close toilet seat's hinges are not adjustable, you can replace them with a new set, which costs less than $15 USD, to make your seat work like new again. You could also replace the entire seat for around $50 USD or less. Use your fingers to push the hinge dampers back into the hinge assembly.
Are all toilet seat hinges the same?
There are two main types of hinge fixings, top fixing and bottom fitting, and it is worth noting that not all hinges are suitable for all toilets. Bottom fixing toilet seat hinges feature a traditional style fixing which includes fitting two bolts down into your pan and then tightening them from underneath.
How does a soft close toilet seat hinge work?
Gravity controls it but special, tensioned hinges control the gravity. This is where the slow part comes in so there's no slamming down. To get the seat on its way to closing, even just a light tap will do the trick. After a few seconds, the seat and/or lid will come to rest like a small feather landing on the floor.
How do I stop my toilet seat from moving sideways?
How to Fix a Loose Toilet: Locate and install seat stabilizers. Then install a set of toilet seat stabilizers, such as Safe-T-Bumpers. Loop the rubber band around the toilet seat and center the stabilizers so they touch the inside rim of the bowl. Drill a starter hole and secure the stabilizers with screws from the kit ...
Why does my toilet seat keep moving?
If not appropriately threaded, the wing nut may strip or not hold tight, causing your toilet seat to move out of position. To thread properly, the tips of the wing nut must be centered and pressed up into the underside of the mounting hole. It's best to turn the screw, not the wing nut.
What are the different toilet seat fittings?
There are two types of toilet seat fixings: Bottom Fixings and Top Fixings. Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.
How do you fix a loose toilet seat without access?
2:073:10How to fix a toilet seat with hidden fixings - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can see there there's a little screw on the top. And we need to tighten up that screw. So we canMoreYou can see there there's a little screw on the top. And we need to tighten up that screw. So we can take a phillips head screwdriver. Tighten that one up nicely. Once we're done we can put our cap.
How do you fix a toilet rock back and forth?
0:593:55Fix A "Loose/Rocking Toilet (EASY!!!) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThese toilet shims to stop it from wobbling. Or take the toilet shim.MoreThese toilet shims to stop it from wobbling. Or take the toilet shim.
How do you fix a broken toilet flange?
1:037:42Toilet Flange Repair Using a Toilet Flange Extender (Step-by-Step)YouTubeStart of suggested clipEnd of suggested clipYou can buy a replacement ring. And your hardware store or plumbing supply warehouse. This isMoreYou can buy a replacement ring. And your hardware store or plumbing supply warehouse. This is stainless steel it's made by Sioux chief. You can also get a toilet flange for pair ring this split.
How do you tighten a screwless toilet seat?
0:471:35How to tighten a loose toilet seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo this seat is removed simply by pulling. Up. The caps and using a Phillips head screwdriver theMoreSo this seat is removed simply by pulling. Up. The caps and using a Phillips head screwdriver the longer. The longer the screwdriver the better it makes it easier to type you simply tighten.
Why does my soft close toilet seat not stay up?
The most common reason toilet seats won't stay up is because the seat was installed too far back towards the tank. Unscrew the seat, pull it as far forward as you can, and retighten. This should give your seat the extra angle it needs to stay upright.
Introduction
This guide shows how to fix slow-close toilet hinges that have become loosened through extended use. The steps in this guide include removing the toilet seat, taking apart the hinge assembly, tightening the dampers, reassembling the toilet seat, and then putting it back onto the toilet bowl.
Step 6
Grip your needle-nose pliers in one hand and the hinge assembly in the other.
Step 7
Place the hinge assembly back into the toilet seat with the holes aligned.
Why adjust soft close hinges on toilet seat?
The only reason you would need to adjust soft-close hinges is if your soft-close seat is not closing at the right speed. ...
How to remove a toilet seat from a toilet?
Slide the seat forward from the down position to remove it. Leave the seat all the way down so that it is resting in the closed position on the toilet bowl. Flip up the plastic hinge covers at the back of the seat, then grasp the seat from the back and pull it straight forward off the toilet.
What is a clip on hinge?
Plastic clip-on hinge assemblies are the second main type of hinge assemblies that soft-close toilet seats can have. Look for rectangular plastic pieces that come off the back of the toilet seat, which cover the bolts in the toilet bowl that the seat’s hinges clip onto.
What type of hinges are used on a soft close toilet?
Metal peg-style hinges are 1 of the 2 main types of hinge assemblies that soft-close toilet seats may use. Look for metal pegs coming up from round plates attached to the back of the toilet bowl, which the hinges on the toilet seat slide onto.
How does a soft close toilet seat work?
Some soft-close toilet seat hinges can be adjusted to make the seat close more slowly.
How to get a toilet seat off?
Leave the soft-close seat in the fully open position. Hold the seat at the top and bottom or at both sides and carefully pull it straight up off the metal pegs. If your toilet seat doesn’t lift straight off, try tilting it forward just a few degrees and see if you can lift it off from that position.
Is a soft close toilet seat adjustable?
Not all soft-close toilet seat hinges are adjustable. If there are notches on the dampers that make it so you can only take them in and out in 1 position, they are not adjustable. If your hinges are adjustable, they may be hexagonal or have multiple notches that allow you to put them in at different positions.
Introduction
Tighten a loose or wiggly toilet seat with inexpensive rubber bushings and seat stabilizers. It's a 15-minute fix that'll last for years.
The basics of toilet seat repair
Forum reader “tank_military” asked for advice on keeping a toilet seat tight for more than a few months at a time. Another forum member advised that he change out the plastic toilet seat bolts to steel. We think that’s just a temporary fix too.
How to Fix a Loose Toilet: Install rubber bushings
To begin remove the toilet seat nuts and insert the rubber bushings. Install the rubber bushing with the tapered side facing up toward the toilet seat. Then use the tightening tool from the kit to snug up the nut.
