
How to Fix a Faulty TV Power Board
- First, unplug your TV and remove the stand or wall mount (mounting bracket). When handling your TV, make sure it’s always standing upright or laid flat (face-down).
- Unscrew the back casing of the TV on the outer edge. Depending on your TV model, they may be between 10-20 screws.
- Remove all the wiring harnesses from the power board. ...
How to repair short power supply of TV?
- A cap is a few bucks and easy to replace if you can desolder and solder.
- You need to identify the bad capacitor.
- The bad cap will look buldged out or extra fat and deformed.
- The small cross on the top of the cap usually splits when they go bad.
- (This is because of a chemical reaction in the capacitor that expands therefore leading to the buldging.)
How to troubleshoot a TV power supply?
This test will identify some common issues:
- Short circuits inside the power supply
- Failed components
- A live power connection
How to repair TV Power Board?
There are 3 ratings to identify:
- uF (micro farads)
- Temperature
- Voltage
How to test a TV Power Supply Board?
Upon checking the primary supply towards Pin 1 and 3 of T401-A (Circle in RED), 330V was noted and this proof that this voltage was not boosted. This confirmed that the primary side of the PSU was working well except that the 330 VDC was not boosted.

Can a power board be repaired?
Is it possible to repair my TV power board at home? Yes. Sending your TV to your manufacturer for repairs can be pretty pricey, especially if you factor in shipping and handling fees. However, fixing your power board at home is easy, and the tools required cost less than $50.
How much does it cost to fix a TV power supply board?
Repairing a TV power supply board costs $23 to $234 for parts alone. Completely replacing the power supply board costs $250 for parts and labor. If one capacitor has failed, the cost for replacement capacitors is low.
Can a TV main board be repaired?
Troubleshooting and repairing your TV mainboard is moderately easy. All you need is a multimeter, screwdriver, and replacement parts.
How do you fix a TV that has power but wont turn on?
0:171:40How To Fix Your TV if it Won't Turn On - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first method is to unplug the tv from the wall. Wait 60 seconds be patient wait the whole 60MoreThe first method is to unplug the tv from the wall. Wait 60 seconds be patient wait the whole 60 seconds. This is a power reset on your tv. Then plug it back in.
Is it worth fixing a TV?
If you want to reduce waste or have a simple fix, repairing your TV is worth it. However, sometimes the cost of repairs can exceed the cost of a new TV. Therefore, depending on the age of your TV and the parts you need to replace, replacing your old TV with a new model is more cost-effective.
How much does it cost to replace a main board on a TV?
You will find that it will cost anywhere between $200 and $400. Anything more than that means that those technicians are trying to overcharge you. The average for hiring someone is about $275. A technician can replace the unit in your Samsung TV within a day or so, depending on how many projects they are working on.
Why do TV motherboards get damaged?
Motherboards can go bad for many reasons, although there are a few common culprits. Among the most common causes of motherboard failure are excess electrical shocks, physical damage, or excess heat. Some of these dangers are inescapable, and may vary in likelihood depending on your computer model.
How does a TV motherboard get damaged?
Electrical Spikes and Surges Lightning is the #1 culprit of spike/surge motherboard failure we see — and it will often go in through the Coax Cable / Phone Line / Ethernet Port and bypass a surge protector! This sudden change of voltage can cause damage to the delicate circuits in a motherboard.
How do I know if my main board is bad?
The computer may start to boot but then shuts down. Increased Windows errors or "blue screens of death" are symptoms of failing motherboards. The computer may freeze for seemingly no reason, or connected devices that worked before suddenly won't work.
How do I know if my TV fuse is blown?
Depending on the make and model of your TV, use a screwdriver to unscrew the TV fuse cap holder. Then, carefully check the fuse wire. If you can see a visible gap between the wires or a visible metallic or dark smear inside the glass, you have a blown TV fuse.
How do you test a TV power supply?
0:172:48Multimeter Voltage Testing for TV Repair - Ground and PositiveYouTubeStart of suggested clipEnd of suggested clipWhen testing a voltage on the hot side puts a positive test lead imap in you are testing. And thenMoreWhen testing a voltage on the hot side puts a positive test lead imap in you are testing. And then put the ground lead on either the negative side or on a heatsink on the hot side.
How much does it cost to fix a TV that wont turn on?
TV Repair Prices by ProblemProblemAverage Repair Costs (Labor Included)TV Will Not Turn On$60 - $400Damaged Cables$75 - $200No Sound$75 - $400Screen Lights Up and Goes Blank$100 - $2003 more rows•Jan 24, 2022
What is the power supply board on a TV?
TV Power Supply: The power board converts the ac line voltage which is 110 volts AC to lower voltages that are required for the operation of the television, very important is the stand by 5 volts needed by the microprocessor to stay wake so when it receives a command such as power on to turn on the power supply, then ...
How do you test a TV power supply?
0:172:48Multimeter Voltage Testing for TV Repair - Ground and PositiveYouTubeStart of suggested clipEnd of suggested clipWhen testing a voltage on the hot side puts a positive test lead imap in you are testing. And thenMoreWhen testing a voltage on the hot side puts a positive test lead imap in you are testing. And then put the ground lead on either the negative side or on a heatsink on the hot side.
How do I fix my Samsung power supply board?
0:443:38Samsung TV Power Supply & Main Board Replacement TutorialYouTubeStart of suggested clipEnd of suggested clipAfter I've removed the screws I can lift the board from the panel. Then. I will take my replacementMoreAfter I've removed the screws I can lift the board from the panel. Then. I will take my replacement board line it up correctly and then screw it to the panel to secure it. Tightly.
How do I replace the power board on my LG TV?
0:445:23LG 55LF6000 TV Board Replacement - How to Fix Your LG 55" LED TVYouTubeStart of suggested clipEnd of suggested clipI will remove all of the screws that hold the board to the TV panel. I. Will slide by replacementMoreI will remove all of the screws that hold the board to the TV panel. I. Will slide by replacement board into position and then tighten it to the panel with the screws.
Who wrote the Smart OLED/LED/LCD TV repair tips?
By Jestine Yong on November 20, 2019. In the E-book written by Kent Liew – Smart-OLED/LED/LCD TV Repair Tips – V6, chapter: “Another New Tool to easily to do the PSU self-test with monitoring feature”, guides the reader on how testing can be performed on a PSU without having to connect to the TV.
Does a drain pin need a resistor?
The Drain (D) pin receiving 330 VDC steps down the voltage through built in regulation circuit (5.75 volt) and this means this IC does not need a start up resistor. This is depicted in Figure G.
Is 5VsB a standby voltage?
However, there was still no standby voltage of 5VSB. Upon tracing the voltage lines of the DC-to-DC converting circuit, it came to my knowledge that the 5VSB is produced by IC U501 (MP1584EN), a high frequency step-down switching regulator with an integrated internal high-side high voltage power MOSFET. This can be observed in Figure I as shown below.