
- RUN CABLE. Before starting, be sure to turn off all power to the cabinet location at your home's fuse/breaker box before working with electrical systems.
- CUT A HOLE. Cut a hole for the switch box and run cable into it from a power source - perhaps a nearby receptacle.
- ATTACH THE LIGHTS. ...
- WIRE THE LIGHTS. ...
- WIRE THE SWITCH. ...
Can you dim under cabinet lights?
Basic fluorescent fixtures are much cheaper, but usually can’t be dimmed. The wiring method we show works for any 120-volt undercabinet light. Plan to install a continuous row of lights for the most evenly distributed light. Some types of undercabinet lights are provided with plug-in connectors to join fixtures end to end.
How to install under cabinet lighting in kitchen?
How to Install Under Cabinet Lighting in Your Kitchen. 1 Locate a Power Source. Find a nearby outlet in the wall opposite the back side of the cabinets and plug in a radio (right). Find the circuit by ... 2 Open the Wall. 3 Add the Initial Junction Box. 4 Drill Holes for Horizontal Runs. 5 Cut the Flex. More items
How do I remove a light fixture from a kitchen cabinet?
Remove any lens on the fixture, then the lamp (tube). Then remove the metal cover - this may require removing a couple of screws or pushing in a couple of metal tabs. You might have to crane your neck to see up there, or hop up on the counter.
What happens if you put the wrong bulb in under cabinet light?
The size and the width of the halogen bulb pins at its base should keep you from installing the wrong bulb in your under-cabinet light. The fixture won't light properly, if at all, if you force the wrong bulb in the socket.

How do you troubleshoot under cabinet lighting?
0:472:19Troubleshooting - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure the power cable is plugged all the way into the outlets. And into the power supply. ItselfMoreMake sure the power cable is plugged all the way into the outlets. And into the power supply. Itself. Then check the polarity of each connection. Making sure the plus and minus match up properly.
Why did my under cabinet lights stop working?
The fixture won't light properly, if at all, if you force the wrong bulb in the socket. Double-check the bulb requirements or take the original bulb with you when you purchase a replacement to save yourself a second trip to the store. Using the correct bulbs can prevent permanent damage to the under-cabinet lights.
How do you replace under cabinet light fixtures?
4:028:45How To Remove Under Cabinet Lighting - What A Mess! - YouTubeYouTubeStart of suggested clipEnd of suggested clipPiece the upper piece is tied into the kitchen cabinets. And there's actually a piece of wood that'sMorePiece the upper piece is tied into the kitchen cabinets. And there's actually a piece of wood that's kind of glued in there. And then i take those screws. Out.
How do I replace LED under cabinet lighting?
0:3515:43Under-counter Lights F.L. to L.E.D. Change-out - YouTubeYouTubeStart of suggested clipEnd of suggested clipTypes. So I'm gonna show you a few things I did to do this very simple job except it's veryMoreTypes. So I'm gonna show you a few things I did to do this very simple job except it's very difficult to work under these cabinets. Because you have to lay on top of the counter.
Why did my LED lights suddenly stop working?
This problem has two possible causes. Either (A) You you have a 24V power supply connected to 12V LED strips. Or (B) there is a 'short' along the strip – in other words the solder has gone across the PCB somewhere and the +ve and -ve are touching, shorting the circuit.
What happens when an integrated LED light burns out?
Integrated LED fixtures typically last for many years, often a decade or more. When they do burn out, rather than shopping for a replacement LED bulb, customers will order a new LED array, or module.
How do you replace hard wired under cabinet lighting?
0:201:17Hardwired, LED, Under-Cabinet Lighting Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou use a jumper to go from that box into your first led fixture and then jumpers to go between theMoreYou use a jumper to go from that box into your first led fixture and then jumpers to go between the other fixtures it cleans your installation.
How do you troubleshoot LED lights?
To troubleshoot, try the following steps:1) Confirm that your power supply's voltage and current rating are compatible with your LED strip. ... 2) Confirm that your power supply is working correctly. ... 3) Check and isolate other accessories on the same circuit. ... 4) Check for any visible loose connections.More items...
How do you change a puck bulb under cabinet?
How to Change Under Cabinet Halogen Light Bulb: Step-by-Step ProcedureStep 1: Turn Off the Power. ... Step 2: Remove the Damper. ... Step 3: Remove the Retaining Ring. ... Step 4: Unscrew the Housing. ... Step 5: Remove the Bulb Cover. ... Step 6: Replace the Bulb. ... Step 7: Turn On Electricity and Test. ... Step 8: Replace the Housing and Appliance.
How do you install LED tape under cabinet lighting?
0:007:11How to install LED Strip Lights – Under Cabinet LED Strip - YouTubeYouTubeStart of suggested clipEnd of suggested clipHello in this video I'm going to show you how to install under the cabinet LED lights these are theMoreHello in this video I'm going to show you how to install under the cabinet LED lights these are the strip lengths. Now these lights can be bought at places like Home Depot or Lowe's. They peel back
How do you replace halogen under cabinet lights with LED?
0:583:07Home Repair led lights replace halogen under kitchen cabinet puck ...YouTubeStart of suggested clipEnd of suggested clipI'm going to turn them on and I'll show you how bright they are both come on instantly. That's theMoreI'm going to turn them on and I'll show you how bright they are both come on instantly. That's the LED that's the halogen let me go back a little bit get an angle on it.
Why would a fluorescent light stop working?
A dead fluorescent can be caused by lack of electrical power (tripped breaker or blown fuse), a dead or dying ballast, a dead starter or a dead bulb(s). Check for power first... then the starter (if applicable) and then the bulbs. When all else fails, the ballast should be replaced.
How do I fix my china cabinet light?
0:422:36How to Fix the Top Lights in Your Glass Cabinet - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf your top light still doesn't work change the ceramic connector. Remove the wire nuts. And placeMoreIf your top light still doesn't work change the ceramic connector. Remove the wire nuts. And place the faulty connector to the side attach the ceramic connector to the bulb. Then.
How do you use a Capstone Lighting Remote?
3:368:44CAPSTONE PUCK VIDEO - YouTubeYouTubeStart of suggested clipEnd of suggested clipOr with the remote control to manually operate the lights simply push down on the activation domeMoreOr with the remote control to manually operate the lights simply push down on the activation dome once to turn them on and again to turn them.
How to remove a lamp tube?
Remove any lens on the fixture, then the lamp (tube). Then remove the metal cover - this may require removing a couple of screws or pushing in a couple of metal tabs. You might have to crane your neck to see up there, or hop up on the counter.
How to get a new ballast for a light fixture?
They should be able to provide you with a new ballast and sockets. They may even wire up the new ballast to the sockets for you if you ask nicely.
What to do if grounding it right doesn't fix it?
If grounding it right doesn't fix it, replace the ballast. In a lot of cases a good ballast costs more than the entire fixture did, which tells you something about the quality of ballasts in cheap fluorescent fixtures.
What happens if you touch a fluorescent light?
Lenirdrake, if the light goes on when you touch it, the most likely fault is a missing ground. Some fluorescents just need their reflectors grounded to start reliably. When you touch the fixture, your body is substituting for the missing ground.
Is it cheaper to replace a ballast or replace a fixture?
It is often cheaper to purchase a replacement fixture rather than just a ballast.
Is it hard to install a ballast?
A ballast isn't difficult to install, as long as you replace it with exactly the same type. However, I'd hate to see you spend $20 or so on a new ballast, and still not have a working light.
Can you replace a ballast in an undercabinet?
You can by a replacement ballast, but it likely will cost you more than just going out and buying a replacement LED fixture.
What is halogen under cabinets?
Under-cabinet halogen lights can chase the shadows from your kitchen work area while providing more light than their incandescent counterparts for the same amount of wattage. Halogen lights under your cabinets are more efficient but can present problems that might not occur with incandescent lights.
Why do halogen bulbs burn?
The design of a halogen bulb allows it to burn brighter and longer than its incandescent cousin. The gases inside the bulb allows the burned off tungsten to redeposit back onto the filament rather than onto the bulb’s glass shell. The special coating on the exterior of the halogen bulb reflects the infrared light back onto the filament, allowing it to burn brighter. These gases and coating can also lead to bulb failure when mishandled. Touching the exterior of the bulb with bare fingers when installing it in the under-cabinet fixture weakens the glass, possibly leading to a broken filament or shattering of the bulb's glass. Wrapping a tissue around the bulb before you install it prevents oils from your fingers from transferring and stops the bulb from burning out early.
What is the gas inside a halogen bulb?
The gases inside the bulb allows the burned off tungsten to redeposit back onto the filament rather than onto the bulb’s glass shell. The special coating on the exterior of the halogen bulb reflects the infrared light back onto the filament, allowing it to burn brighter.
How many volts does a halogen bulb need?
Many halogen bulbs are similar in appearance, but the subtle differences indicate whether the bulb requires 10, 12 or 120 volts. The size and the width of the halogen bulb pins at its base should keep you from installing the wrong bulb in your under-cabinet light. The fixture won't light properly, if at all, if you force the wrong bulb in the socket. Double-check the bulb requirements or take the original bulb with you when you purchase a replacement to save yourself a second trip to the store. Using the correct bulbs can prevent permanent damage to the under-cabinet lights.
Can a halogen light switch be turned on?
An undersized dimmer switch operating your halogen lights can overheat the dimmer, burning it out and causing the lights to fail. Low-voltage under-cabinet halogens don't turn on when connected to a 120-volt dimmer switch. Ensure your dimmer switch's rating is equal to or greater than the total bulb wattage or rated for low-voltage lighting for the lights to work correctly.
Do you need a transformer for a 120V halogen light?
Wiring a standard 120-volt halogen under-cabinet light fixture does not require anything more than matching the black wires, white wires and the ground wires together. If you install a low-voltage under-cabinet halogen light, you need a step-down transformer to reduce the amount of voltage coming into the fixture.
How to secure a cable to a fixture?
Secure the cable to the fixture with a cable clamp. Connect the wires according to the manufacturer's instructions.
How to locate outlet in base cabinet?
To locate the position of the outlet in the base cabinet, chuck an 8-in. length of coat hanger into your drill and drill a hole alongside the outlet and through the back of the cabinet. Then mark a 12-in. square and cut an access hole ( Photo 2) directly behind the electrical box. A sharp keyhole saw works well.
How to install flex connectors in cabinets?
Drill 1-1/8 in. holes through the cabinet sides and run 1/2-in. flex for each light or group of lights, for the switch and for the power ( Photo 4 and Figure A ). Allow an extra 6 in. of flex where it enters the walls. Ream the cut end of the flex to remove burrs and install flex connectors on both ends.
How to connect a dimmer switch?
Connect the dimmer or switch according to the manufacturer's instructions. Fold the wires into the box and fasten the dimmer and cover plate.
How to pull plastic cable through flex?
Push or use a fish tape to pull the plastic-sheathed cable through the flex ( Photos 7 and 8 ). Allow an extra 12 in. of cable at the junction box and several feet beyond where the cables should end. It’s better to waste a few feet of cable than to end up short.
What color is aluminum wiring?
CAUTION! If you have aluminum wiring, call in a licensed pro who is certified to work with it. This wiring is dull gray, not the dull orange that’s characteristic of copper.
Do you need conduit for under cabinet lights?
If you can run the plastic-sheathed cable high in the cabinets or behind drawers, you may not need conduit. Ask your local electrical inspector which method is acceptable. Even though the wiring is simple, you’ll still have to tie in to a source of power to provide 120 volts for the hardwired under cabinets lights.
