how to repair wicker rattan furniture

by Ms. Stacey Daniel Jr. Published 2 years ago Updated 2 years ago

How To Repair Rattan Furniture

First, clean your rattan furniture using warm water and a clean cloth. ...
Next, identify the areas in need of mending. ...
If you find loose ends poking out, these can be fixed easily by directly applying a small amount of glue and tucking them back into the rope weaving and wicker ...
Check for loose wrappings on the legs of your furniture. ...

Full Answer

How to replace plastic rattan furniture with wicker?

To replace sections of the plastic rattan furniture, you will need to new plastic rattan wicker. Try to match your furniture’s color or you will have to do a touchup with matching paint. Then, you will need a pair of needle-nose pliers. For the finishing touch, you will need a paintbrush and a similar colored paint.

How do you repair wicker furniture?

You’ll need some replacement wicker or rattan strands, wood glue, a large bowl, some strong scissors, olive oil, a clean cloth and warm water. You can also use varnish if you want to give the entire piece a refresh. It’s best to repair the furniture outside, so make sure you choose a day with beautiful weather, and not too strong wind.

What tools do you need to repair broken rattan furniture?

Some required tools are plier, wire cutter and special pulling tool for wicker furniture. If there are broken rattan, you will need some additional materials to fill the hole.

Is plastic wicker rattan weather-resistant?

Although plastic wicker rattan is weather-resistant, the strips can get frayed or cut. You can repair the furniture by replacing the plastic rattan weave on your own with the right tools.

How do you fix outdoor wicker furniture?

How to Fix Faux Wicker Patio FurnitureClean the Faux Wicker Patio Furniture. ... Remove Broken and Frayed Ends. ... Cut a New Resin Strip to Fit. ... Apply a Quick-Set or Non-Quick-Set Epoxy. ... Weave the Strip Into Place. ... Glue the Ends Together Before Trimming. ... Touch Up the Section as Necessary.

How do you repair ripped wicker furniture?

If you have a section on your wicker that's broken, first, use an Exacto knife to cut out the damaged strands. Then, soak replacement reeds in warm water for 30 minutes to make them flexible. Drain the excess water, then weave the new reeds into the wicker pattern.

Can rattan furniture be repaired?

Not to worry—both wooden and synthetic rattan are easy to repair, and both can be fixed in the same way. If your furniture only has a few loose ends or wrappings, refer to the first method in this guide. If some sections of your furniture need a little extra TLC, skip ahead to the second method.

How do you fix a worn rattan?

How to Repair a Rattan ChairSand the Weave. Sand the sides of the rattan at the points where it will be reattached, using 200-grit sandpaper. ... Apply Wood Glue. ... Join the Pieces Together. ... Removed the Damaged Weave. ... Soak the New Weave in Water. ... Interlace the Weaves. ... Glue the Weaves Into Place. ... Trim Off Excess Pieces.

Is wicker and rattan the same?

“The difference is that rattan is a material, whereas wicker is the style and method of weaving,” Zoe explains. “Wicker can be woven from rattan as well as many other natural or synthetic materials, which is where the confusion often lies.”

How do you fix a hole in a rattan?

For smaller hole or the rattan is not broken, just bent, you can use the needle to pull and push rattan in place. Carefully rearrange and tighten it until the hole is clearly unseen.

How do you refurbish rattan furniture?

How To Refinish Rattan Furniture In 7 Easy StepsVacuum the furniture thoroughly.Repair any damaged areas.Clean the furniture with mild dish soap.Let the furniture dry out.Sand the furniture with sandpaper.Apply a single coat of paint or lacquer.Additional coats as needed.

Why is my rattan furniture splitting?

Long-term exposure of natural rattan to sunny weather may result in splitting and cracking of the furniture.

How do you renovate rattan furniture?

0:075:31How To Restore Cane Furniture with Linseed Oil - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd well to try and fix that up I've heard linseed oil is really good for furniture. And outdoorMoreAnd well to try and fix that up I've heard linseed oil is really good for furniture. And outdoor furniture.

How do you restore dry wicker?

How to Refresh Dried-Out WickerVacuum the wicker thoroughly using a bristle attachment. ... Mix water with a mild detergent. ... Mix 1/4 cup of bleach in 4 cups of water. ... Place the furniture in a well-ventilated area, preferably outdoors on a sunny, breezy day.More items...

Can resin wicker be repaired?

To repair your resin wicker furniture, you will need a few tools. You will need new resin wicker strips, manicure scissors or box cutter, and plastic epoxy. Optionally, you will want to match the wicker color with matching paint or spray paint.

How do you wrap a rattan?

0:239:47How To Bind Your Joints - 3 Methods - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you fold it quite neatly over the point there it's a bit tricky with one hand but then you wrapMoreAnd you fold it quite neatly over the point there it's a bit tricky with one hand but then you wrap that around the back at the top one come back over the top here.

How do you fix the wicker on a bottom chair?

0:544:26How to Replace Pressed Cane Webbing - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe easiest way to get the spline out of the groove is to use a caning chisel but you can also useMoreThe easiest way to get the spline out of the groove is to use a caning chisel but you can also use an appropriately-sized chisel or screwdriver. Cut out the middle of the cane.

Can you repair resin wicker furniture?

If the resin strips are loose, you can reattach them with glue. You can use resin epoxy. Dip the tip of the strip in the epoxy and hold it in the weave for a few seconds. If the strips are cut or frayed, you will need to repair them differently.

How do you restore a wicker chest?

When wicker with a clear finish (lacquer, shellac or varnish) becomes dull, you can usually restore its luster by rubbing with a soft cloth dampened with furniture polish or lemon oil. Minor scratches can be disguised by rubbing with a wax-stick scratch remover, available at home centers and some furniture stores.

How do you repair cane furniture?

0:045:31How To Restore Cane Furniture with Linseed Oil - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd well to try and fix that up I've heard linseed oil is really good for furniture. And outdoorMoreAnd well to try and fix that up I've heard linseed oil is really good for furniture. And outdoor furniture.

How Can I Repair a Resin Wicker?

What are the benefits of rattan furniture?

Another benefit is that it is lightweight, making the furniture, like plastic rattan tables and chairs, easy to move.

Why is plastic wicker furniture durable?

Plastic wicker furniture lasts for a long time because they are durable and weather resistant. If you clean the furniture regularly, it will give you a nice look that outlasts regular wicker furniture. Another benefit is that it is lightweight, making the furniture, like plastic rattan tables and chairs, easy to move.

What to do if resin strips are loose?

If the resin strips are loose, you can reattach them with glue. You can use resin epoxy.

How to match furniture color?

Try to match your furniture’s color or you will have to do a touchup with matching paint. Then, you will need a pair of needle-nose pliers. For the finishing touch, you will need a paintbrush and a similar colored paint. Spray paint will also do the job to match your color or redo the color of your furniture.

Why use a weave puller?

The reason to use these tools is to pull the strips that are damaged from the weave.

Is plastic wicker good for outdoor furniture?

Outdoor furniture made with plastic wicker is trendy because of the weave design that gives a comfortable lounge experience. The sturdy rattan-like weave adds a refined feel to your garden, patio, and backyard. Although plastic wicker rattan is weather-resistant, the strips can get frayed or cut.

How to pull rattan string out of wicker?

It’s necessary to check for the weaving style of your wicker furniture. Use the needle to help pull the rattan string in and out. Don’t forget to cut the leftover and push it back inside the surface. For smaller hole or the rattan is not broken, just bent, you can use the needle to pull and push rattan in place.

How to remove a broken rattan?

If the hole is large and rattan is broken, you might need to cut it off. Use the plier and pulling tool to pull it off and remove the damaged rattan by wire cutter or any special scissors.

When is the right time to take home wicker patio furniture?

Summer is the right time of the year to take home with you these patio conversation sets. Creating an outdoor oasis on the patio has never been simpler with our 2019 wicker furniture sectional...

What is needed to tighten rattan?

A pulling tool is needed to tighten the rattan. Depending on the state of the hole, there will be different things needed. Some required tools are plier, wire cutter and special pulling tool for wicker furniture. If there are broken rattan, you will need some additional materials to fill the hole.

What is the first room we decorate?

A living room is often the first room we decorate and the first room we show new guests during a tour. But it doesn’t necessarily mean we cannot welcome our guest in an outdoor...

Can wicker furniture be damaged?

Everything, even your favorite wicker furniture, can be damaged someday. One of the common damages that any owner would have encountered is furniture hole. You might think of replacing the furniture at first, but the cost would hurt your pocket. Besides, it’s your favorite after all. So repairing is a possible and reasonable solution for this problem. If it is not too serious, or you want to DIY, note these 5 steps to repair your wicker furniture hole properly.

Do you have to repaint rattan after covering a hole?

After covering the hole, you will have to repaint it so that the old and new rattan matched regarding the color. Note that this step is only needed when you have to reweave your wicker furniture pieces.

How long should I soak a rattan coil?

Once your rattan is purchased, soak the coil in water for 20 minutes. If you omit this step your rattan will be very stiff, brittle, and difficult to work with. I used a large bowl of water and kept it nearby while working with the rattan to prevent it from drying out.

What to use for a cane that is fragile?

For thinner, more fragile cane I would recommend a soft toothbrush.

Can you stop rattan?

You can stop here if you love the look of the natural rattan.

Can you cut a tucker on the other end?

Allow for some extra tucking room on the other end and cut (if it’s too long you can trim it later).

Choose Rattan

Before Fix your Rattan Furniture, the first step is to choose Synthetic Rattan Material fit for your Furniture, that is rattan front color and rattan width. Choose a new rattan strand for your furniture from rattan color to rattan width.

Replacement broken rattan strip

Step1: Cut away the broken or damaged rattan strip under the Weave Rattan to hide the replacement.

What material is used to replace wicker reeds?

Wicker can be manufactured using natural or synthetic resin materials. Whether you use natural or resin reed, the style and size of the reed can vary and so can the colors. 3.

How long do you soak wicker reeds in water?

Note: Natural wicker reed will need to be soaked in water for at least 15 minutes to make it flexible enough to bend prior to weaving. 10. Stain and Seal Natural Wicker. If you are repairing a natural wicker product, you will need to stain or paint it to match your finish.

How to weave a reed?

Its important to remember two things: 1 You will need more length than the linear distance between start and finish of your weave because the weaving action takes up more reed than you might otherwise expect. 2 Leave at least an additional 2 inches excess at the end of each side of the new reed so that it can’t pull out the you put the finished ends tucked under the surface where they can’t be seen.

How to keep a reed in place?

Back out the end of the remaining reed so that the end is aiming down away from the surface. Leave at least 1-2 inches of the original reed tucked down under the surface. To keep a piece of reed in place properly, the more you weave it in the better it holds. So, if you can, try to remove enough original reed so that you can weave back in a pice over and under the cross members at least four to seven times, more if you like. In small areas you may have no other choice but to use a short weave over and under 2-3 cross members. In those cases, you might have to live with it being a little loose when you weave the new piece in. But its perfectly acceptable as long as the woven piece does not fall out.

How to get a replacement reed?

In order to acquire the correct replacement reed, you might need to take a sample from the damaged reed or from a piece of reed that has excess sticking out from a concealed place under the furniture. If you can acquire a sample you can show the vendor, you have a better chance of getting the right replacement or one close enough you can live with from them.

Is it hard to repair wicker furniture?

Repairing wicker furniture sounds hard and in some cases it can be. However, this lesson concentrates on replacing missing or damaged reed that is woven in one direction and not intended for highly complicated woven sections. Small repairs are very easy and doing it yourself can be a very rewarding experience. Once you get the feel for it, it’s not bad at all and it does however, take a little patience.

Do you need to paint wicker after staining?

If you are staining and not painting, you should seal the stained reed with a clear acrylic paint after its stained and dry. You won’t need to paint or seal if your wicker is natural and untreated. Go to your hardware store and buy the smallest amount of stain you can find.