how to repair windows 10 in safe mode

How to reboot Windows 10 into safe mode?

Safe Mode via MSConfig Tool

1. Press Win + R, type msconfig and click on the “ Ok ” button to open the MS Config tool.
2. In the new window, go to the “ Boot ” tab. Here, select “ Safe Mode ” checkbox and click on the “ Ok ” button.
3. Now, restart the system normally and it will boot into the Safe Mode.

More items...

How do I restart in safe mode Windows 10?

How do I force Windows to start in Safe Mode?

• Press the Windows Key + R.
• Type msconfig in the dialog box.
• Select the Boot tab.
• Select the Safe Boot option and click Apply.
• Choose Restart to apply the changes when the System Configuration window pops up.

How to fix not working safe mode on Windows 10?

Windows Won’t Boot into Safe Mode FAQ

• Enter Safe Mode to fix the issue.
• Remove all USB drives.
• Turn off Fast Boot.
• Use anti-virus software to scan your computer.
• Performa a System Restore.
• Re-installing Windows.

How to boot up in safe mode in Windows 10?

Why is the safe mode used in Windows 10?

• Method 1: Go to the search bar or Cortana of Windows 10 and type msconfig and press Enter button. ...
• Method 2: To start your computer system in safe mode and access the boot manager of your operating system, press the keys Ctrl + F8 together during the startup process.
• Method 3: Click on the Start menu and go to the power option. ...

How do I repair Windows in Safe Mode?

How to Fix Your PC in Safe ModeScan for Malware: Use your antivirus application to scan for malware and remove it in Safe Mode. ... Run System Restore: If your computer was recently working fine but it's now unstable, you can use System Restore to restore its system state to the earlier, known-good configuration.More items...•

How do I do a system restore on Windows 10 in Safe Mode?

Run System Restore from Safe Mode in Windows 10Search “recovery” in the Windows 10 search box and select the top result Recovery.In the pop-up window, click Open System Restore.When you launch System Restore, click Next.Select one of the available restore points to do system restore in Safe Mode.More items...•

How do I start an automatic repair in Safe Mode?

Under the Windows Setup window, choose "Next" Navigate to "Repair your computer" > "Troubleshoot" > "Advanced options" > "Startup Settings” Choose the Safe Mode (Enable Safe Mode, Enable Safe Mode with Networking, and Enable Safe Mode with Command Prompt) that meets your needs.

How do I repair corrupted Windows 10?

Use the System File Checker tool to repair missing or corrupted system filesOpen an elevated command prompt. ... If you are running Windows 10, Windows 8.1 or Windows 8, first run the inbox Deployment Image Servicing and Management (DISM) tool prior to running the System File Checker.

Can I factory reset my PC in Safe Mode?

If no install CD or DVD is available, you can boot into Safe Mode and run System Restore. Before you begin, note that you can't undo a restore if you run it from Safe Mode. Or, you can run System Restore via the System Recovery Options menu: Turn the computer and press the F8 key as above.

Is F8 Safe Mode for Windows 10?

Now you can start Safe Mode using the F8 key 1) Ensure your computer is turned off. 2) Turn your computer on. 3) Before anything appears on your screen, press F8 repeatedly until the Boot Options menu below displays. Then select Safe Mode.

Why is F8 not working for Safe Mode?

The reason is that Microsoft has reduced the time period for the F8 key to almost zero interval (less than 200 milliseconds). As a result, people almost can't press the F8 key within such a short period of time, and there is little chance to detect the F8 key to invoke the boot menu and then start Safe Mode.

Can't boot Win 10 Safe Mode?

Using the Shift+ Restart combination when you can't enter Safe Mode:Open the 'Start' menu and click or tap on the 'Power' button.Keeping the Shift key pressed, click on Restart.One can also use the Shift+ Restart combination from the 'Sign In' screen.Windows 10/11 would then reboot, asking you to select an option.More items...

How do I fix a corrupted operating system?

To restore the operating system to an earlier point in time, follow these steps:Click Start. ... In the System Restore dialog box, click Choose a different restore point, and then click Next.In the list of restore points, click a restore point that was created before you began to experience the issue, and then click Next.More items...

How do I repair Windows 10 with Command Prompt?

Open "Start", search for the Command Prompt, select it and run as administrator. 2. Then type the command: "sfc /scannow" and press "Enter". If SFC is unable to fix the problem, probably the utility cannot get the necessary files from the Windows image, which might have become broken.

What is Run command to start System Restore Windows 10?

I suggest you to open run command by pressing Windows key + R and then enter rstrui.exe and press Enter. Try this and check if system restore opens up.

Does Windows 10 still have System Restore?

Since Windows 10 no longer includes the System Restore feature enabled by default, you must enable it manually. To enable System Restore on Windows 10, use these steps: Open Start. Search for Create a restore point and click the top result to open the System Properties page.

What is safe mode on Windows 10?

The Windows safe mode is a diagnostic mode with only the necessary drivers and files loaded to start your computer. This can be very helpful if you are having trouble starting your device, as it will allow you to run System Restore without loading all of the other drivers that are not related to the issue. If this does not resolve your issue, then you may want to re-install Windows.

What if I can’t fix my issue through Safe Mode?

If your computer remains unresponsive after a complete Windows reinstall, your hardware may be faulty. A full Windows reinstall eliminates any software-related issues unless there’s an outdated hardware driver that has to be updated.

How to restart Windows 10?

Windows 10: Click Restart on the “Power Options” submenu of the Start Menu while pressing and holding Shift. Click Advanced Options > Startup Settings > Restart. When you see the Startup Settings screen , press the “4” key.

Why does my computer crash in safe mode?

If your computer is stable in Normal Mode but crashes in Safe Mode, there’s a good chance that the problem lies with the software. If your computer continues to crash in Safe Mode, this is frequently a sign of a hardware issue. (Note that stability in Safe Mode doesn’t necessarily indicate it’s due to a hardware problem. For example, if your graphics card is broken and causes shutdowns under load, it may be stable in Safe Mode, as in Safe Mode the graphics card driver doesn’t load up)

How to get to Advanced Boot Options?

1) Restart your computer and immediately begin tapping the F8 key until your computer enters the Advanced Boot Options menu.

How to open a system configuration window?

Press Win+R (Windows key plus the R key) at the same time to bring up a Run dialog box. Type msconfig and click OK. This will open the System Configuration window.

How to make Windows 10 boot safe?

Step 1: Right-click Start button and choose Run. Step 2: Type msconfig in the Start > Run box and hit Enter. Step 3: Wait until System Configuration is launched, then go to the Boot tab and check the Safe boot option under Boot options. Also ensure Minimal is selected as the sub-option.

How to restart a laptop with a mouse?

Step 1: Right-click Start button and navigate the mouse over Shut down or sign out, which reveals a bunch of power options. Step 2: Press and Hold Shift key and then click Restart. Wait until your computer reboots and enters into the Advanced Options screen.

How to Fix Windows 10 Stuck in Safe Mode?

In this section, we will show you how to fix the error of Windows 10 stuck in Safe Mode.

How to get out of safe mode?

Way 1. Uncheck Safe Mode 1 Press Windows key and R key together to open Run dialog. 2 Then type msconfig in the box and click OK to continue. 3 In the pop-up window, navigate to the Boot tab. 4 Then uncheck the option Safe boot option. 5 Check the option Make all boot settings permanent. 6 Then click Apply and OK to save the changes.

How to delete safeboot in command prompt?

In the Command Prompt window, type the command bcdedit / deletevalue {default} safeboot and hit Enter to continue.

What is safe mode in Windows 10?

Safe Mode is a built-in diagnostic mode of Windows 10 (7, 8, etc.) computer operating system. If you start Windows 10 PC in Safe Mode, it will only allow starting up basic system programs and services in booting process. A Windows 10 PC booted in Safe Mode is a stripped down version of computer.

What to do if your Windows 10 is unstable?

If your Windows 10 computer runs unstable recently, you can perform a System Restore to restore the system to an earlier state which has a good configuration. But what if Windows 10 System Restore stucks in normal Windows 10 start mode? Then you may try to start Windows 10 in Safe Mode to run a successful System Restore without crashing.

Why isn't F8 working in Windows 10?

And we know that this method isn’t working in Windows 10 and 8 because Windows 10/8 has much faster booting speed. However, you can still make F8 work again in Windows 10 with the BCD (Boot Configuration Data) Edit command. Step 1. Open Administrator Command Prompt window.

How to restart Windows 10 with a keyboard?

Step 1. You can press and hold Shift key on the keyboard, and click Start menu on Windows 10 at the same time. Then click the Power icon in the Start menu and choose Restart.

How to open a command prompt in Windows 10?

You can press Windows key and R key on computer keyboard at the same time to open RUN window. Then type cmd in the box, and press Ctrl + Shift + Enter key at the same time to run the Administrator Command Prompt window. Please do not simply click OK, because it won’t open the Command Prompt (Admin) window.

How to open system configuration utility?

You can press Windows + R key, input msconfig in Windows RUN window and hit Enter to open the System Configuration utility.

Why does my computer stop working?

If your computer is crashed or stops working because of malware or virus infection, you may boot Windows 10 in Safe Mode to scan and remove malware/virus . You can also use Windows Defender in Windows 10 to scan and kill the malware and virus in PC.

What to do when Windows 10 cannot boot?

When Windows 10 cannot boot normally, you can use Startup Repair to fix Windows loading problems.

How to restore Windows 10 to factory settings?

1. Boot into Windows 10 recovery mode and navigate to Advanced Option menu. 2. Select the option System Restore. 3. Select your username and enter your password. 4. Select a restore point from the list, and click Next to start the System Restore. Before you start the System Restore, you can scan for affected programs.

How to fix corrupted files in Windows 10?

If you can boot Windows 10 or safe mode, you can type “cmd” in the search box. 2. Right click on the result Command Prompt and select Run as Administrator. 3. Type “sfc /scannow” (without quotes) and press Enter.

How to reset a Windows 10 computer?

You can go to Settings > Update&Security >Recovery > Reset this PC.

How to refresh Windows 10?

If you want to refresh Windows 10 and install Windows updates, you can run a command “systemreset -cleanpc” from an elevated command prompt .

How to install Windows 10 on a virtual drive?

1. Download the latest Windows 10 installation ISO file and save it on your hard drive. 2. Double-click on this ISO file to mount it as a virtual drive. (Windows 7 or older version of Windows will have to use third party tool to mount an ISO file) 3. Locate the Setup.exe file and double-click to run it.

Can you run rstrui.exe before a system restore?

On some cases, only the option Command Prompt is available , then you can type ”rstrui.exe” (without quotes to bring out System Restore.