Repairing Guides

how to repair windows xp

by Joshuah Corwin Published 2 years ago Updated 2 years ago
image

How to Repair My Windows XP

  1. Backup your data. Although a Repair Install should not affect any of your data,...
  2. Insert your Windows XP setup disc. If you bought your computer from a manufacturer such as Dell,...
  3. Reboot the computer and enter the BIOS. With the disc inserted, restart your computer.
  4. Change your boot order. Once you've entered the BIOS,...

Repair the Windows Installation from the Recovery Console
  1. Boot from a standard Windows XP Install CD (not a Network Install CD).
  2. At the first setup screen, hit R to repair Windows using the Recovery Console.
  3. Select the Windows installation that you would like to repair by entering its number, followed by Enter.
May 2, 2007

Full Answer

How to reinstall Windows XP on an old computer?

Part 3 Part 3 of 3: Setting up Windows XP

  1. It's in the bottom-right corner of the window. You can also click Customize ...
  2. Enter your name, then click Next. Your name goes in the "Name" text field. ...
  3. Enter your product key, then click Next. ...
  4. Add a password, then click Next. ...
  5. Set a date and time zone, then click Next. ...
  6. Check the "Typical Settings" box, then click Next. ...
  7. Check the "No" box. ...

More items...

How to make clean install of Windows XP?

Step 2: Installing Windows XP using Bootable USB drive

  • After you have successfully created your bootable Windows XP USB or CD, now it’s the time to boot your system from that.
  • For that, you have to go into your System BIOS and Change the Boot Disk Preference to USB or CD depending upon your choice.
  • After that, your system will run Windows XP Installation Setup.

More items...

How do you repair Windows XP using the Recovery Console?

Repair the Windows Installation from the Recovery Console. Boot from a standard Windows XP Install CD (not a Network Install CD). At the first setup screen, hit R to repair Windows using the Recovery Console. Select the Windows installation that you would like to repair by entering its number, followed by Enter. CD .. ATTRIB -H C:\boot.ini.

How to perform System Restore in Windows XP?

  • Click Start→All Programs→AccessoriesSystem Tools, and then click System Restore.
  • Click Restore my computer to an earlier time after Welcome to System Restore displays, and then click Next. ...
  • Click restore points available in calendar when Select a Restore Point appears, and then click Next. ...

More items...

image

How do I run Windows XP repair?

About This ArticleInsert your Windows XP setup disc.Reboot the computer and enter the BIOS.Set the PC to boot from the CD first.Reboot again to boot from CD.Press R to select the Repair install.Select your copy of Windows.Set your preferences.Install all Windows Updates.

How do I repair Windows XP without a disk?

Using System RestoreLog in to Windows using an administrator account.Click “Start | All Programs | Accessories | System Tools | System Restore.”Select “Restore my computer to an earlier time” and click “Next.”Choose a restore date from the calendar and select a specific restore point from the pane to the right.More items...

How can I repair Windows XP with command prompt?

Launch System Restore from a command prompt in Windows XPRestart. your computer and press [F8] during the initial startup.When. you see the Windows Advanced Options Menu, select the Safe Mode with a Command. ... Select. the Windows XP operating system.Log. ... Type.

How do I make a Windows XP repair disk?

To create the bootable diskette for Windows XP, follow these steps:Boot into Windows XP.Insert the diskette in the floppy disk.Go to My Computer.Right-click on the floppy disk drive. ... Click Format.Check the Create an MS-DOS startup disk option at the Format options section.Click Start.Wait for the process to finish.More items...•

How do I fix corrupted files in Windows XP?

Here are the steps to run CHKDSK using the Windows XP Recovery Console:Insert the Windows XP installation CD.Restart the computer and boot from the CD.Press any key to boot from the CD.Press R when the Windows Options menu is loaded to access Repair Console.Enter the Administrator password.More items...

How do you repair Windows?

How to repair Windows 10 (and 11) in 4 stepsThe Windows 10 (or 11) repair drill.Step 1: Using DISM and SFC for system repair.Step 2: Try a recent restore point or image backup.Step 3: In-place upgrade to current Windows 10 version.Step 4: Completely reinstall Windows 10.Picking up the pieces after the repair.More items...

How do I fix boot failure?

Fixing “Disk boot failure” on WindowsRestart the computer.Open the BIOS. ... Go to the Boot tab.Change the order to position the hard disk as the 1st option. ... Save these settings.Restart the computer.

How do I start Recovery Console?

When the Welcome to Setup screen appears, press the R key to start the Recovery Console. Select the Windows installation that you must access from the Recovery Console. Follow the instructions that appear on the screen, type the Administrator password, and then press ENTER.

How do I use a Windows repair disk?

To use the system repair discInsert the system repair disc into your CD or DVD drive.Restart your computer using the computer's power button.If prompted, press any key to start the computer from the system repair disc. ... Choose your language settings, and then click Next.Select a recovery option, and then click Next.

How do I boot Windows XP?

What is the boot command for Windows XP? To boot XP FROM the Command Prompt, type “Type “shutdown -r” without quotes. To boot XP TO the command Prompt, repeatedly press 'F8' to load the 'Advanced Settings' menu.

How to check Windows XP version?

Verify the version of Windows XP that is installed on the computer 1 Click Start, click Run, type Winver.exe in the Open box, and then click OK. 2 In the About Windows dialog box, verify the version of Windows XP that is installed on the computer.

How to uninstall XP SP2?

To do this, follow these steps: Click Start, click Run, type appwiz.cpl in the Open box, and then click OK . In the Currently installed programs list, click ...

How to remove Internet Explorer from Windows 10?

Click Start, click Run, type appwiz.cpl in the Open box, and then click OK. In the Currently installed programs list, click Internet Explorer 7 or click Internet Explorer 8, and then click. Remove. If Internet Explorer is not listed in the Currently installed programs list, follow these steps: Open a command prompt.

How to remove a program from Internet Explorer?

Click Start, click Run, type appwiz.cpl in the Open box, and then click OK. In the Currently installed programs list, click Windows Internet Explorer 7, or click Windows Internet Explorer 8, and then click. Remove.

When will Internet Explorer 11 be retired?

Note: The Internet Explorer 11 desktop application will be retired and go out of support on June 15, 2022 (for a list of what's in scope, see the FAQ ). The same IE11 apps and sites you use today can open in Microsoft Edge with Internet Explorer mode. Learn more here.

Does Internet Explorer work after Windows XP repair?

If you do not uninstall the later version of Internet Explorer in this situation, Internet Explorer will no longer work after the repair installation of Windows XP is completed. Specifically, the repair installation does not restore earlier versions of the files in the Program FilesInternet Explorer folder. Therefore, the later version files ...

Where is my Windows product key?

Your Product Key is typically located on the case that the Windows disc came in, or on a sticker affixed to your computer.

What are the key combinations for Windows 10?

The key varies from system to system, and will be displayed beneath the manufacturer's logo. Common keys include: F2, F10, F12, and Delete. If Windows begins to load, the Setup key was not pressed in time and you will have to retry. Change your boot order.

Does a repair install remove a virus?

A repair installation should not affect your personal data, but back everything important up just in case. Thanks! Helpful 8 Not Helpful 6. A repair install will fix any files system files affected by a virus, but will not remove the virus itself.

Introduction

If your Windows XP installation becomes corrupt and you cannot boot into Windows normally or through Safe Mode, it may be possible to repair Windows without having to completely start over with a fresh installation.

Repair Process

To repair your Windows XP installation, you will need to boot your computer to the Windows XP installation CD. Your computer must be configured to boot from the CD or DVD drive first. You may need to configure your computer's BIOS to boot priority to boot from the CD or DVD drive first.

Installing Drivers

Now that Windows is installed, the next step is to verify that your hardware drivers are correctly installed.

Windows Updates

Now that you have finished repairing Windows XP and your hardware drivers, the next step is to install critical Windows updates. For this, you will need a connection to the Internet. Click on Start, All Programs, Windows Update. This connects to Microsoft's website through Internet Explorer. Next click on the Express tab.

Completed!

Congratulations! You have now successfully completed a Windows XP repair installation!

How to install Windows XP on a new computer?

1. Insert the Windows XP CD into your computer. If you no longer have a copy of the CD, contact your computer manufacturer for a replacement, or download an .iso from the internet that you can burn to a blank CD. Be aware of viruses, and know that you will still need to enter a valid Product Key to install.

Where is the Windows XP key?

It can usually be found in one of a couple different places: Attached to the case your Windows XP CD came in, usually on the back. Attached to your computer. If it is a desktop then it is usually located on the back of the tower. For a laptop, it is on the bottom.

How to install Windows XP on a blank CD?

Steps. Insert the Windows XP CD into your computer. If you no longer have a copy of the CD, contact your computer manufacturer for a replacement, or download an .iso from the internet that you can burn to a blank CD. Be aware of viruses, and know that you will still need to enter a valid Product Key to install.

How to reboot a computer in BIOS?

Once you are in the BIOS, navigate to the Boot menu. Set the 1st Boot Device as the CD drive. Depending on your BIOS and setup, this could also be called the DVD drive, the Optical drive, or CD/DVD drive. Save your changes and exit the BIOS. This will cause the computer to reboot. ...

How to know if my computer is not installed?

To see which devices are not installed properly, open the Start Menu and right-click My Computer. Select the Hardware Tab, and then click Device Manager. If there are devices with a yellow exclamation point, then they may need their drivers reinstalled.

Getting to the Windows Recovery Console

Insert your Windows XP CD into your CD and assure that your CD-ROM drive is capable of booting the CD. Configuring your computer to boot from CD is outside of the scope of this document, but if you are having trouble, consult Google for assistance.

Results and wrap-up

It’s time to reboot your PC by typing EXIT in the Windows Recovery Console and confirming the command with a stroke of the enter key. With any luck, your PC will boot successfully into Windows XP as if your various DLL, Hive, EXE and NTLDR errors never existed.

How to repair Windows installation?

Repair the Windows Installation from the Recovery Console 1 Boot from a standard Windows XP Install CD (not a Network Install CD). 2 At the first setup screen, hit R to repair Windows using the Recovery Console. 3 Select the Windows installation that you would like to repair by entering its number, followed by Enter. 4 At the Recovery Console, type each following commands followed by Enter:#N#CD ..#N#ATTRIB -H C:\boot.ini#N#ATTRIB -S C:\boot.ini#N#ATTRIB -R C:\boot.ini#N#del boot.ini#N#BOOTCFG /Rebuild#N#Set the Load Identifier to: Microsoft Windows XP Professional#N#Set the OS Load Options to: /noexecute=optin /fastdetect#N#CHKDSK /R#N#FIXBOOT 5 Type exit to reboot the computer. 6 If the computer still doesn't boot after the repair, backup data from the hard drive, if possible, and bring your machine to one of the walk-in locations.

What to do if your computer won't boot after a repair?

Type exit to reboot the computer. If the computer still doesn't boot after the repair, backup data from the hard drive, if possible, and bring your machine to one of the walk-in locations.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9