how to use usb drive to repair windows 10

How to create Windows 10 repair boot USB

All in all, it is a wise choice to create Windows 10 repair USB drive in case of Windows 10 running into problems. Here are the detailed steps:

1. Connect a USB drive to your working computer and make sure it can be detected. ...
2. In the search box, type “recovery drive” and choose “Create a recovery drive”.
3. In the small pop-up window, check the option “Back up system files to the recovery drive” and click “Next”.
4. Select a USB flash drive and click “Next’.
5. Click “Create” to start the operation.

Full Answer

How to fix a corrupted USB drive on Windows 10?

To update the driver of your USB drive, you need to:

• Right click Start icon and find Device Manager. Open it.
• Find your corrupted USB drive and right click on it. Choose Uninstall device.
• Plug out your drive and plug it in again. Your computer will automatically update the driver itself.

How do you fix an USB drive?

Repair the Connected USB Drive

1. Firstly, try to connect your USB drive to your Mac the usual way. ...
2. This will open the Disk Utility application on your Mac. Otherwise, you can also go to Finder > Applications > Utility to launch the same application as well. ...
3. On the sidebar, you can see a list of all the connected (and the internal) data sources available on Mac. ...

More items...

How to repair a corrupted USB flash drive?

How to repair the USB flash drive on Windows 10

1. Click on the “My Computer- Removable Disk” icon. Then right-click the “Properties” tab to the Removable Disk icon.
2. Scan; let the computer do the task of scanning and restoring previously corrupt files.
3. Finally, right-click the USB pen drive and click on eject to safely disconnect the drive from the computer system.

How to fix Windows 10 not booting?

Windows 10 Not Booting After Update

• Revert Installed Updates. Wait patiently for the Windows 10 booting procedure to begin after turning on your machine. ...
• Recover Using Startup Repair. Windows 10 will not start can be fixed by running automatic startup repair in the recovery environment.
• Boot in Safe Mode. ...
• Checking For Errors Using Command Prompt. ...
• Check Errors in Hard Drive. ...

How do I repair Windows with a flash drive?

0:262:00How to Boot or Repair Windows 10 using the Installation MediaYouTubeStart of suggested clipEnd of suggested clipStart by going to microsoft. And downloading a windows iso. And create a bootable usb drive when youMoreStart by going to microsoft. And downloading a windows iso. And create a bootable usb drive when you boot from your usb.

How do I factory reset Windows 10 with USB?

0:281:19How To - Use a USB Recovery Drive to Reset Your PC in Windows 10YouTubeStart of suggested clipEnd of suggested clipDrive is connected to the PC. Power on the system and continually tap the f12 key to open the bootMoreDrive is connected to the PC. Power on the system and continually tap the f12 key to open the boot selection menu use the arrow keys to highlight the USB. Recovery drive in the list.

How do I use a USB recovery drive?

Make sure your Surface is turned off and plugged in, and then insert the USB recovery drive into the USB port. If you can, use a USB 3.0 drive with at least 16 GB. Select Start, enter recovery drive, and then select Create a recovery drive or Recovery Drive from the results.

How do I repair Windows 10 with disk?

Press the power button to turn on the system and immediately start pressing the Boot Menu option key, usually F12, to enter the boot menu. Use up/down key to select the bootable USB drive or system repair/installation disc and hit Enter. On Windows setup screen, click 'Next' and then click 'Repair your Computer'.

How do I restore Windows 10 without a disk?

Restore without an installation CD:Go to "Start" > "Settings" > "Update & Security" > "Recovery".Under "Reset this PC option", tap "Get Started".Choose "Remove everything" and then choose to "Remove files and clean the drive".Finally, click "Reset" to begin reinstalling Windows 10.

How do I force a factory Reset on Windows 10?

Answer: Press the ''F11'' or ''F12'' key when you restart the system. Select the option to reset to factory settings. The system will then boot itself with restored factory settings.

How do I reinstall Windows 10 from USB in BIOS?

How to boot from USB Windows 10Alter the BIOS sequence on your PC so your USB device is first. ... Install the USB device on any USB port on your PC. ... Restart your PC. ... Watch for a “Press any key to boot from external device” message on your display. ... Your PC should boot from your USB drive.

Can I repair Windows 10 without losing data?

By using Repair Install, you can choose to install Windows 10 while keeping all personal files, apps and settings, keeping personal files only, or keeping nothing. By using Reset This PC, you can do a fresh install to reset Windows 10 and keep personal files, or remove everything.

How do I restore my computer with a recovery drive?

To restore or recover using the recovery drive:Connect the recovery drive and turn on your PC.Press Windows logo key + L to get to the sign-in screen, and then restart your PC by pressing the Shift key while you select the Power button> Restart in the lower-right corner of the screen.More items...

How do I repair corrupted Windows 10?

Use the System File Checker tool to repair missing or corrupted system filesOpen an elevated command prompt. ... If you are running Windows 10, Windows 8.1 or Windows 8, first run the inbox Deployment Image Servicing and Management (DISM) tool prior to running the System File Checker.

Can you create a system repair disk on a flash drive?

You cannot create a system repair disc on USB and make it a bootable flash drive. If you want to create an ISO file and move to other places, you need to turn to other tools to create a system repair disc to ISO file. You may even receive the error “the parameter is incorrect” during the creating process.

Is there a Windows 10 repair tool?

Answer: Yes, Windows 10 does have a built-in repair tool that helps you troubleshoot typical PC issues.

How do I restore Windows 10 to factory settings without settings?

You can do this by using the boot option menu when you start the PC. To gain access to this, go to the Start Menu > Power Icon > and then hold down Shift whilst clicking the Restart option. You can then, go to Troubleshoot > Reset this PC > Keep my files to do what you ask.

How do I wipe and reinstall Windows 10?

Windows 10 has a built-in method for wiping your PC and restoring it to an 'as new' state. You can choose to preserve just your personal files or to erase everything, depending on what you need. Go to Start > Settings > Update & security > Recovery, click Get started and select the appropriate option.

How do I format my laptop using USB Windows 10?

Connect the USB flash drive to your technician PC. Open Disk Management: Right-click on Start and choose Disk Management. Format the partition: Right-click the USB drive partition and choose Format. Select the FAT32 file system to be able to boot either BIOS-based or UEFI-based PCs.

How do I reset my USB to factory settings?

Find and select your USB flash drive. Click the "Erase" tab in the window to show options for erasing the flash drive. You'll have to choose a file system (such as FAT32 or HFS+) to format on the new USB drive, as well as choosing a name for the drive. Click Erase to erase the drive's contents and reformat it.

How can I repair my USB flash drive?

Knowledge of how to fix and repair a corrupted USB drive can save you a lot of work in redoing a project all over again. A USB pen drive works under the same memory principle as a computer hard drive. Before you try USB flash drive repair, you need to know what is causing the problem. This can mitigate future storage-related issues.

How to fix unreadable disk drive?

You can sometimes fix the unreadable drive by enabling the device on the control panel’s device manager. You simply go to start and then control panel in order to access the device manager. Enlarge the list next to the “disk drives option.”. Double click on the arrow facing downwards under this tab option to “Enable device.”.

How to rebuild a hard drive on a laptop?

Step 1 – Click on the “My Computer- Removable Disk” icon. Then right-click the “Properties” tab to the Removable Disk icon. Left-click the tools tab to select the button named “Rebuild” on it.

How to rebuild a USB drive?

Step 1 – Click on the “My Computer- Removable Disk” icon. Then right-click the “Properties” tab to the Removable Disk icon. Left-click the tools tab to select the button named “Rebuild” on it.

How to find a USB drive that is missing?

Step 1 – Attach the USB drive to your computer and press on the Windows button at the bottom left of your screen (this used to be called the Windows Start button). As soon as you see a popup, type diskmgmt.msc and hit enter. This will start Disk Management, which is great for detecting any missing drive.

How to use a pen drive in Windows 10?

Step 1 – Insert/connect the USB flash drive or hard drive into the computer system USB port. Step 2 – Windows 10 should automatically detect the USB flash drive. Then, go to the removable disk icon under the “My Computer” icon list. Step 3 – Access the pen drive via right-clicking the properties tab, then click on the Tools tab using ...

How to get to disk management on Windows 10?

Step 1 – Attach the USB drive to your computer and press on the Windows button at the bottom left of your screen (this used to be called the Windows Start button). As soon as you see a popup, type diskmgmt.msc and hit enter. This will start Disk Management, which is great for detecting any missing drive.

How to Repair Windows with USB?

It is not a single step to complete the whole process . It contains the following steps:

What to do if your computer won't boot?

If your Windows computer won’t boot normally and you want to repair it, you’d better recover your files in advance to keep them safe. You can use the bootable edition of MiniTool Power Data Recovery, a professional data recovery software, to retrieve your files.

What is Windows Startup Repair?

This tool can scan your computer for issues like missing or corrupt system files. If problems are found, Windows Startup Repair can automatically fix them. During the repairing process, your computer may restart several times.

What does it mean when you see the setup interface?

When you see the following Windows Setup interface, it means that your device successfully boots from the Windows installation USB drive.

What command to use to check for logical errors?

For example, you can use the CHKDSK command to check the file system of a volume for logical and physical errors. If you use the CHKDSK command without any parameter, this tool will only show you the status of the volume but not fix any errors. If you use the CHKDSK command with the /f, /r, /x, or /b parameters, it will fix the found errors on the volume.

What is system image backup?

A system image backup is a copy of the drives required for Windows to run. If you have made a system image, you can use it to restore your computer if the hard drive or device stops working.

What are the two types of Windows 10 updates?

Windows 10 updates have two types and they are feature updates and quality updates. Now, you can read this post to get their main differences.

How to create bootable media in Windows 10?

Step 1. In the main interface, click “ Create Bootable Media ” under “ Tools ” tab. Step 2. Select the type of bootable media that you are creating . WinPE is recommended. Note: Linux based bootable media enable you to access basic functions of AOMEI Backupper and Windows PE based bootable media allow you to access all functions of it.

How to repair a computer using a USB?

If you need to repair system using boot repair USB drive when your operating system fails to boot, you can insert the repair USB drive to your computer and enter BIOS to make your computer boot from the bootable disk firstly. Then, when the recovery screen appears, go to “ Advanced options ” > “ Troubleshoot ” > “ Startup Repair ”.

What to do when your PC fails to start?

When your PC fails to start, you can boot it from the bootable USB drive and perform system restore in WinPE. Download and install the freeware to have a try:

How to repair a computer when it doesn't boot?

If you need to repair system using bootable recovery drive when your operating system fails to boot, you can insert the repair USB drive to your computer and enter BIOS to make your computer boot from the bootable disk firstly. Then, when the recovery screen appears, go to “ Advanced options ” > “ Troubleshoot ” > “ Startup Repair ”.

What is a Windows 10 repair drive?

As described above, the bootable Windows 10/11 repair drive helps to fix boot issues, restore or reinstall Windows OS. But it cannot be used to start other computers. Sometimes you are even unable to create a recovery USB disk.

What is a Windows 10 recovery USB?

Here creating Windows 10 repair boot USB drive means to create a bootable recovery drive using USB drive. If you have already made such a drive before system crashes, you’ll be able to fix issues, reset your computer when your computer is unable to boot. The bootable recovery drive also offers you an opportunity to reinstall Windows 10 if you are unable to repair your system.

How to make a recovery drive?

PS: If you have any data that you don’t want to lose, backup files at first as this operation will delete all data on the USB drive. Step 2. In the search box, type “recovery drive” and choose “ Create a recovery drive ”.

What to do if you forgot your BIOS password?

Note: If you have previously set the BIOS password you will need to provide the password to enter BIOS setup. If you forgot BIOS password, you will need to reset it by taking out the CMOS battery from the motherboard. In case you haven't done this before, it is best to take the help of a technician. If you forgot Windows login password, try to reset your Windows 10 password with PC Unlocker software.

What is the key to enter BIOS?

When the PC starts to run, on the first screen it will display the key you need to press in order to enter the BIOS setup. Usually, it is the 'Delete' or 'Del' key. Note: If you have previously set the BIOS password you will need to provide the password to enter BIOS setup.

What does it mean when your motherboard doesn't support USB boot?

Once you are there you can set the Boot Priority. If you do not see the USB boot option, it means that your motherboard does not support it. You will need to boot using some other method. Report abuse.

Can I Download a Windows 10 Recovery Disk?

If you never created a USB recovery drive when Windows was working, Windows 10's built-in tool called Reset This PC can install a fresh copy of Windows. You don't need to create a Windows 10 installation USB; however, it is possible to install Windows from a USB if you can't access the Advanced Startup Options.

How Do I Repair Windows 10 With USB?

If your PC won't boot up at all, and you have a bootable Windows USB, repair your Windows installation by booting from the USB. Select Recover from a drive when given the option and choose Just remove my files .

How to make a recovery drive for a computer?

If your computer has a disc drive, you can create a recovery drive on a CD or DVD. Type Recovery Drive in the Windows search bar and select the Recovery Drive app. Make sure the Back up system files to the recovery drive box is checked and select Next . Select your USB drive, then select Next .

How to get Windows to boot from USB?

If your computer doesn't boot to the Advanced Start Option, try changing the boot order in the system BIOS to boot from the USB drive first. Select Use a Device .

What to do if your computer won't boot up?

If your PC won't boot up at all, and you have a bootable Windows USB, repair your Windows installation by booting from the USB. Select Recover from a drive when given the option and choose Just remove my files . Reinstalling Windows from a USB drive will wipe all of your files and restore your PC to factory settings.

How to create a recovery USB for Windows 10?

Here's how to create a recovery USB while your PC is working so you can restore Windows 10 later: 1 Insert the USB drive into your computer.#N#If your computer has a disc drive, you can create a recovery drive on a CD or DVD. 2 Type Recovery Drive in the Windows search bar and select the Recovery Drive app. 3 Make sure the Back up system files to the recovery drive box is checked and select Next . 4 Select your USB drive, then select Next . 5 Select Create .#N#Doing this will erase everything else on the USB drive, so move any files you want to keep to your PC. 6 Wait for your recovery drive to be created, then select Finish .

Who is Michael Heine?

His specialties include web development, cryptocurrency, and cybersecurity. Michael Heine is a CompTIA-certified writer, editor, and Network Engineer with 25+ years' experience working in the television, defense, ISP, telecommunications, and education industries.

More Windows 10 resources

For more helpful articles, coverage, and answers to common questions about Windows 10, visit the following resources:

Microsoft will begin testing experimental Windows 11 features with Insiders

Microsoft has today announced that it's changing up the way in which it flights preview builds of Windows 11 to Insiders registered in the Dev or Beta Channels. Going forward, both channels are to be considered the "active development branch," but for different kinds of feature testing.

Xbox Game Pass 2022 review: Still the best deal in gaming

Xbox Game Pass has been out for some time now. I thought I'd look back at how the service is doing, its value, and what features I think it's currently lacking.

Surprise! Microsoft apparently has no idea what to do with HoloLens

With the cancellation of HoloLens 3, internal fighting, poor leadership, and employees feeling the mixed reality division, Microsoft has a massive problem on its plate and can only blame itself. If this all sounds familiar, you’re not wrong.

These 10 apps are must-haves apps for any new Windows PC

You just purchased a new PC and set it up, and now you're looking for some great apps. Look no further. These are the best apps for your new Windows 10 PC.

Did you fix your problems with Windows 10?

When Windows 10 fails to start or work correctly, the recovery drive gives you options to fix your problems. Try it out, see how it works, and let us know about your experience with the Windows 10 recovery drive. Did it manage to help you fix your problems with Windows 10?

How to uninstall Windows 10 update?

Windows 10’s recovery USB drive also allows you to uninstall the last quality or feature updates. On the “ Advanced options ” screen, click or tap on “Uninstall Updates.” Note that in versions of Windows 10 before October 2020 Update, this option was called “Go back to the previous version.”

How to use recovery USB?

To take advantage of the Windows 10 recovery USB drive, you first have to boot your system from the drive you created. Insert the recovery USB drive into your PC and make sure that it boots from it during the next restart. When loaded, the recovery drive first shows the options for the keyboard layout that you prefer using. Find the language you want to use for typing in the recovery environment, and click or tap on its name. If your keyboard layout is not shown on this first screen, go “ See more keyboard layouts. ” For most people, the “ US ” layout works well, even if they are not English speakers.

What is a recovery USB drive?

The Windows 10 recovery USB drive is an essential tool for the troubleshooting of a system with crashes and problems. When Windows 10 fails to start or work correctly, the recovery drive gives you options to fix your problems. Try it out, see how it works, and let us know about your experience with the Windows 10 recovery drive. Did it manage to help you fix your problems with Windows 10?

How to go back to recovery tool in Windows 10?

Starting the Command Prompt from the Windows 10 recovery drive. The Command Prompt window shows up, and you can start typing commands. When you are done , type the command “ Exit ” to go back to the Recovery tool. The Command Prompt from the Windows 10 recovery drive.

What happens when you reset your computer?

The reset of Windows 10 deletes all your personal files and settings from the computer. There are two reasons to run the reset:

What is a Windows 10 system image?

Windows 10 can create an image of the entire partition where it is installed together with all the apps and personal files stored there. The system image is a full copy of the system partition and, in the backup file, there is no differentiation between the system and personal data. When you use the recovery drive to recover Windows 10 with a system image, all system and personal data are replaced with what was available at the moment of the backup. Any changes made since this backup are lost.