Repairing Guides

how to use watch repair tool kit

by Kitty Deckow Published 2 years ago Updated 2 years ago
image

Hold the watch firmly in the palm of your hand and with the tool in the other hand, rotate the whole tool in an anti-clockwise direction and loosen the watch case back. Once loosened, continue to use Mr. Twister until the case back is removed. Take care not to lose the rubber gasket which is sandwiched between the screw-down case back and the watch case as this is used to keep the watch dust free and, in many models, water resistant.

Full Answer

What tools do I need to repair a watch?

[Article]10 Essential Tools Every Watch Repairer Needs

  • Size 2 This will be for picking up heavier pieces. ...
  • Size 3 These are finer than size two and are useful for general purpose when working on wrist watches.
  • Size 5 This size will have extremely fine tips and are most useful when working on watch escapements and manipulating hairsprings.
  • Size AM.BR

What are the best watch repair tools?

View The Best Watch Repair Kit Below

  1. SE 16-Piece Watch Repair Tool Kit. The SE 16-Piece Watch Repair Tool Kit is a great place to start in your search. ...
  2. Ohuhu 156 PCS Watch Repair Tool Kit. Take your watch repairing to the next level with the Ohuhu 156 PCS Watch Repair Tool Kit. ...
  3. EZTool Watch Repair Kit. ...
  4. HAOBAIMEI 168 PCS Watch Repair Kit. ...
  5. Vastar 151 PCS Watch Repair Kit. ...

More items...

What tools are typically included in a watch repair set?

Watch repair kits are professional quality kits that contain all the tools that you need in order to fix a watch. Tools include a watch case holder, a watch case opener knife, a back pry opener, spring bar tool, link remover, a selection of precision screwdrivers and other items. The tools are usually presented in a zipped carrying case.

How to use some basic watch tools?

  • Screwdrivers
  • Tweezers
  • Movement Holder
  • Loupe
  • Watch Case Tools
  • Watch Hand Removing and Fitting Tools
  • Peg Wood
  • Rodico
  • Demagnetizer
  • Digital Calipers

More items...

image

How do you use tools in a watch repair kit?

10:3218:54Overview of watch toolkits, and how to use the tools in them - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut it in and then you can use the punch edge to maybe push it out spring pins. And then anotherMorePut it in and then you can use the punch edge to maybe push it out spring pins. And then another fork on this end for removing spring bars as well.

How do you use a watch opening tool?

0:443:37How to Open a Screw Down Watch Back with a Case Wrench - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd tighten the holder until it holds the watch case. Securely. Now you need to make sure the caseMoreAnd tighten the holder until it holds the watch case. Securely. Now you need to make sure the case wrench fits securely in the notches of the case back using the thumb screw control between the tips.

What tools do I need to fix a watch?

12 Essential Tools for your Watch Repair KitWatch Case Opener.Watchmakers Screwdriver Set. ... Watchmakers Tweezers. ... Eyeglass or Eye Loupe. ... Watch Hand Lifting Levers. ... Movement Holder. ... Parts Container. ... Pegwood.More items...•

How do you use a watch screwdriver?

0:070:51Reversible Screwdriver Set of 7 For Watch and Jewelry Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you'll always have the screwdriver you need on hand the blades are reversible. And can easily beMoreSo you'll always have the screwdriver you need on hand the blades are reversible. And can easily be changed by loosening and tightening the nut at the end of the screwdriver. Extending.

How do you open the back of a watch with notches?

0:453:31How To Unscrew A Watch Back With Scissors (No Case Wrench Needed)YouTubeStart of suggested clipEnd of suggested clipI'm going to squeeze the handles together and put apply some pressure downwards. And I'm going toMoreI'm going to squeeze the handles together and put apply some pressure downwards. And I'm going to turn counterclockwise. And hopefully I can unscrew. This let's see let's try I'm just gonna.

How do you use a watch clamp?

2:575:22How To Close A Snap Off Watch Back With A Watch Press (Tutorial)YouTubeStart of suggested clipEnd of suggested clipAll that you have to do is grab. The watch press like this and then squeeze it down together. OkayMoreAll that you have to do is grab. The watch press like this and then squeeze it down together. Okay now with most watches you will here the watch back snap.

How do you start a watch repair?

3:5810:28Watch Repair Tool's you will need to start working on Watches - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat's the first step into fixing a watch if it's gaining or losing time demagnetize it and then goMoreThat's the first step into fixing a watch if it's gaining or losing time demagnetize it and then go to step 2 start with the easiest part and then with a with the hardest.

How do you open the back of a watch without the tool?

Using a Rubber Ball on a Screw-Back Watch. Purchase a soft, mashable rubber ball. Rubber balls often have enough grip to pry off watch backings. Choose a rubberized ball that is both squishy and tacky so it can latch onto your watch's back.

How do I get started in watchmaking?

There are two main paths to becoming a watchmaker: apprenticeships and horology school. IWC Schaffhausen in Switzerland offers an excellent 3-year apprenticeship for budding watchmakers. Each year, they search for scientific-minded young people who are prepared for meticulous work.

What size screwdriver do I need for a watch?

But many watch bracelets have screws for which you need a screwdriver with a size of 1.4-1.8mm. Worth adding is that the vast majority of watch bracelets use T-screws.

How do you use a pin pusher watch?

0:101:04Little Giant Link Watch Band Pin Remover - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply place the watch band in the channel align the pin pusher with the pin you want to remove andMoreSimply place the watch band in the channel align the pin pusher with the pin you want to remove and slowly tighten the screw to push the pin out of the watch band.

What is a ratchet screwdriver?

: a screwdriver that is operated by the reciprocating motion of the handle and that usually has a removable screwdriver bit.

How do you open the back of a watch with notches without tools?

5:589:05How to Open a Watch Case With Common Household Items Without ...YouTubeStart of suggested clipEnd of suggested clipYou can use alternatively small precision screwdriver. But I prefer this because give me moreMoreYou can use alternatively small precision screwdriver. But I prefer this because give me more leverage. Even if it doesn't have you just on that spot and you pry it open.

How do I open my watch to replace the battery?

0:102:54How to Save Money Replace Watch Battery with Simple Tools - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a plastic ring that goes around the covers the battery. So just take that and pop it outMoreThere's a plastic ring that goes around the covers the battery. So just take that and pop it out with a pair needlenose pliers.

How do you pop open the back of a watch?

0:382:33How to Open a Snap Off Watch Back - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse it like a lever to pop the back open gently push the handle away from the watch back the backMoreUse it like a lever to pop the back open gently push the handle away from the watch back the back will pop loose. And you will be able to remove it with your fingers.

How do you open a screw back watch without tools?

2:325:35How To Open A Screw Down Watch Back WITHOUT The Right ToolsYouTubeStart of suggested clipEnd of suggested clipAnd you apply some pressure downwards towards the back of the watch and you twist counterclockwise.MoreAnd you apply some pressure downwards towards the back of the watch and you twist counterclockwise. Just like that you can unscrew. You can loosen and unscrew. The back of the watch.

What is a watch tool kit?

A watch tool kit has the necessary tools needed to accomplish such easy tasks as removing or adding watch links, removing the back cover of your watch ( to change a cell ), unscrewing the little screws inside the watch to free the battery. Even taking off the watch band so you can clean it in an ultrasonic cleaner.

How to tell if watch requires wrench?

If your watch requires a watch wrench, you’ll know by the slots, or grooves around the back of the watch like so…

How to unscrew watch pins?

Unscrewing watch pins is a breeze. Grab the right precision screwdriver and applying slight force, push down and turn counterclockwise. Just don’t strip the screw. If you buy cheap screwdrivers, you’ll probably strip them. Invest in precision screwdrivers and you should have no problems.

What is a watch pin remover?

Watch pin remover: There is a great little device out there called a watch pin remover that does exactly what it says. It removes pins from watch links. And it does it very, very well. This is what jewelers use, and if you want to remove links yourself at home, you’ll need one….

How many prongs does a watch wrench have?

There are many different types of common watch wrenches, one with 2 prongs, and one with 3 prongs. Either one works, but the 3 prong is easier to use and since it makes 3 contact points on the watch, it removes the cover much faster, and with less effort.

What does the lip on a watch mean?

That lip means “ I can be popped off. ” Grab a watch case opener, put the sharp edge under the lip with the knife at an angle, like so…

What does it mean when your watch back doesn't snap off?

If your watch back doesn’t snap off, or twist off, it probably is screwed down . You’ll know this if you see little screws holding your back on your watch, like so…

What is the first thing you need to repair a watch?

1. Watch Case Opener. The first addition to your watch repair kit should be a case opener. Before you can even get inside a watch to see what may be causing a problem or just to undertake a regular service you need to remove the back and/or front of the watch.

How long do watchmakers screwdrivers last?

Purchasing a good quality set of watchmakers screwdrivers will be the best investment you can make. If you look after your screwdrivers they can last a lifetime.

How many times magnification do you need for a watch?

No need to panic, you will only really need 2 types: General Eyeglass (3 - 4 times magnification) Inspection Eyeglass (10 - 12 times magnification) Your general eyeglass is used most of the time for dismantling and reassembling your watch.

Why do you need a part container for a watch?

But more importantly they should have a cover which prevents any dust or debris landing on the watch parts after they have been removed and cleaned.

What is a watchmaker tweezer?

Watchmakers tweezers are very different from regular cosmetic tweezers. They have very precise ends that close perfectly together and are easy to operate.

How to remove snap on watch back?

Snap on front and back watches can be removed with a simple case opener knife. Case opener knives are manufactured with a short and blunt blade that is inserted into the chamfer of a case back and then twisted anti-clockwise in order to pop off the case back.

How to remove hands from a dial?

The hands need to be removed vertically and the Hand Lifting Levers do this beautifully by rocking on their angles to drive the hands upwards.

What is the best tool to replace straps on a watch?

A spring bar tool is a must to replace straps. The most trusted one is the Bergeon 6767-F. Again, there are cheaper options but going for higher quality will minimize the time spent removing spring bars. This then reduces the risk of scratching a watch.

What is the best tool to check lumens on vintage watches?

A UV flashlight is also a great little tool that you can use to check the lume on vintage watches.

What is the best ultrasonic cleaner for cleaning parts?

For cleaning parts, you will need a good ultrasonic cleaner like the Quantrex Q140 Ultrasonic with timer and heater. Use some Bergeon 7033 Rodico for cleaning wheels and removing fingerprints from plates, bridges etc. and also for removing superfluous oil from jewels. There are so many ways of using Rodico.

What is a Bergeon 2533 watch case opener?

You will need a watch case opener for screw back watches. The Bergeon 2533 is made of rubber to avoid scratching cases or crystals and providing safety. You just need to place the tool above the watch back, press down to create suction and twist to unscrew the back off.

How to remove back of vintage watch case?

Cautiously place the blade in the space found on the side of the case and press it firmly until you feel the blade going under the back. Move the knife up and down to remove the back.

What is the best pocket watch movement?

A good pocket watch movement to start would be the ETA 6497 or its cheaper Chinese equivalent, the Seagull ST3600. If you are feeling more confident, you can try a normally sized movement with the Sellita SW210-1 Movement.

How to remove dust from a watch?

You will therefore also need a proper demagnetizer. Plug it in and place the watch on top the demagnetizer.

What do you need to unscrew a watch?

Of course, manufacturers use a range of sizes for different models. What you’ll need is multiple miniature screwdrivers, which will allow you to unscrew a watch no matter what its size is.

Why do mechanical watches need handsprings?

The reason is that instruments allow for better grip and superior torque, which come in handy when working with such small objects.

What can you use a watch repair kit for?

The tools in a watch repair tool kit can also be used to repair eyeglasses and similar items with small parts.

How much does a watch repair kit cost?

Watch repair tool kits are generally moderately priced. The majority are between $15 and $25, with a few reaching up to $40 or slightly more.

What type of screwdriver should I use for a watch?

Screwdrivers: A kit should contain multiple screwdrivers — preferably both flat edge and Philips — to handle the variety of tiny screws you run across in your watch repairs. Anti-magnetic screwdrivers are safer to use for the watch. The kit receives bonus points for including extra screwdriver heads in case you break one.

How many pieces are in a 52mm case opener?

151 pieces in all, including multiple sizes of replacement spring pins. Screwdrivers and tweezers are anti-magnetic. Includes an instruction manual. 52mm case opener can handle over-sized watches.

How many pieces are in a watch repair kit?

This is actually a big deal since some of these kits contain 150+ pieces.

What is a link remover?

Link remover: As the name implies, a link remover can remove links from metal watch bands so you can resize them.

How to clean a watch case?

Use a soft brush such as a toothbrush and soapy water to remove dirt and grime from the watch case and metal bands. You can also use a soft cloth between cleanings to keep your watch looking shiny and new.

16PCS Watch Repair Tool Kit

Buy best price professional 16pcs watch repair tool kit for repairing watches and replacing batteries, including phillips screwdrivers, pin punches, tweezers, spring bar remover, hammer, watch case opener knife, slotted screwdrivers, long nose pliers, etc., portable and practical.

30PCS Watch Repair Tool Kit

Portable 30pcs watch repair tool kit for sale, includes screwdrivers, tweezers, spring bar remover, adjustable case opener, pin punches, watch case holder, watch back pry opener, etc. The best watch repair kit meets all your needs for repairing watches.

37PCS Watch Repair Tool Kit

Professional 37pcs watch repair tool kit with low price for sale, includes pin punches, spring bar remover, hammer, watch pin link remover, screwdrivers, adjustable case opener, long nose pliers, etc. The watch repair kit is the best tool set for repairing watches.

143PCS Watch Repair Tool Kit

Economical price 143pcs watch repair tool kit for sale, includes watch strap spring pins, screwdriver, pin punches, tweezers, spring bar remover, adjustable case opener, hammer, leather carry case, etc., a professional watch repair tool kit is the best hand tool for repairing and assembling watches.

147PCS Watch Repair Tool Kit

Reasonable price professional 147pcs watch repair tool kit for sale, includes watch strap spring pins, screwdrivers, pin punches, tweezers, spring bar remover, adjustable case opener, hammer, watch case holder, watch case opener knife, etc. A best watch repair kit meets your different needs for repairing watches.

149PCS Watch Repair Tool Kit

149pcs watch repair tool kit contains hand tools and accessories for repairing and assembling watches, including spring bar remover, watch back pry opener, tweezers, hammer, screwdriver, adjustable case opener, watch pin link remover, watch strap spring pins, etc., practical and easy to carry.

151PCS Watch Repair Tool Kit

Buy professional 151pcs watch repair tool kit with low price, including watch strap spring pins, screwdrivers, pin punches, tweezers, spring bar remover, adjustable case opener, hammer, watch case holder, watch case opener knife, etc., a carry case available. The watch repair kit meets all your needs for repairing watches.

Mark

Wether watch repair is your hobby, or you wish to train as a watch repairer, you will need to buy some tools at some stage. These are the 10 most useful tools you will need in your kit. There is the right tool for every job in all trades and this is especially true for watch repairing.

autowind

Your list is all that is required tool wise to get stated, some of the other things required cannot be bought, such as patience, a steady hand and good eyesight. To anyone wishing to learn I would recommend "Practical watch repairing" by Donald De Carle, this is available from Amazon.

Mark

Indeed - and buy a bunch of scrapper watch movements off eBay - not for repairing them but simply to practice dismantling and re-assembly, this will help to develop confidence in your tools.

Nigel

Did you deliberately leave out those plastic blocks that seem to be used when working on bracelets etc or can this be achieved using the tools mentioned?

bobm12

I prefer to use those "daylight" GE bulbs and I got 2 of them over my work bench. I believe that it doesn't matter what lighting you use as long as you are comfortable with it and your eyes are not strained. Maybe another more experience member have a better suggestion.

altaka

Years ago I purchased some old tools and holders. I think a good set of screwdrivers need to be added to my bench.

NigelNorski

So where to get the best VFM?, I do hate wasting good money on cack tools, also I am aware that good suppliers need to make some profit at the end of the day otherwise we will only be left with army surplus stores...

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9