Sprinkler System Repair Prices
| National average cost | $200 |
| Average range | $100-$400 |
| Low-end | $50 |
| High-end | $850 |
Full Answer
How much does repairing a sprinkler system cost?
The average cost to repair your sprinkler system is $75 to $250, with most homeowners paying $212. Most sprinkler repairs involve replacing sprinkler heads at $5 to $20 per head, or replacing valves at $20 to $40 per valve, not including the cost of labor of about $75 an hour by a professional plumber. Likewise, How deep are sprinkler lines buried?
How much will a good sprinkler system cost?
On average, a professionally installed in-ground sprinkler lawn irrigation system costs between $1,800 to $3,500. For larger and more complex landscapes, the cost can exceed $5,000. In-ground Sprinkler Sample Project.
How to tell if your sprinkler system needs repair?
To Winterize:
- See if your system has auto-drain valves. ...
- If you have manual drains, you'll need to use an air compressor with pressure between 50 and 100 PSI. ...
- Open the valve manifolds to allow any remaining water to drain.
- Hook up the air compressor and run air through each zone in your system until you've cleared all zones of water.
How much to install a sprinkler system?
To estimate costs for your project:
- Set Project Zip Code Enter the Zip Code for the location where labor is hired and materials purchased.
- Specify Project Size and Options Enter the number of "square feet" required for the project.
- Re-calculate Click the "Update" button.
How much does it cost to have my sprinkler system blown out?
about $80 to $85Cost to Blow Out Sprinkler System Hiring a pro to winterize your system will require about $80 to $85. Plumbers usually prefer to "blow out" the sprinkler because it works for almost all systems. This involves an air compressor to force the water out.
How much does it cost to replace a sprinkler manifold?
Replacing a manifold in your sprinkler system costs between $100 and $225 per manifold. Manifolds include multiple valves that can break down, and if one or more valves are broken beyond repair, the entire manifold needs replacing.
How do you fix a broken sprinkler line?
First, find the leak by looking for escaping water or sprinkler heads with little to no flow. Then, dig up and expose the damaged pipe so you can remove it. Use a slip coupling to replace the damaged section of pipe, fill in the dirt around it, and you're done!
How often should you replace your sprinkler system?
between 20 to 25 yearsGenerally speaking, residential lawn sprinklers can last anywhere between 20 to 25 years depending on how well your system was installed and maintained. Your sprinklers' longevity also depends on where you live.
How much is a sprinkler valve cost?
The cost to replace a sprinkler valve runs about $12.50 to $40 each for most models, plus labor expenses. The valve controls the release of water to the various zones in the yard.
How do you replace an inground sprinkler system?
0:424:51Replace SPRINKLER HEAD in 5 Minutes - Rainbird - Hunter - OrbitYouTubeStart of suggested clipEnd of suggested clipYou don't need to go all the way down because you could actually cut the sprinkler line. And if yourMoreYou don't need to go all the way down because you could actually cut the sprinkler line. And if your knife is thick enough you can use it to pry this doughnut out or just use your hands.
How do you fix a leaking sprinkler system?
2:387:26EASY Irrigation Sprinkler System Leak Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can put some kind of system in there to catch water turn on your irrigation. Line let it sprayMoreYou can put some kind of system in there to catch water turn on your irrigation. Line let it spray out any dirt or that may have gotten in the lines you want to check your fittings. For cracks.
How do I find a broken sprinkler wire?
0:232:43Using a Pulser to Troubleshoot a Sprinkler System Wire BreakYouTubeStart of suggested clipEnd of suggested clipThe receiver goes parallel with the wire path. And when you turn it on there's an analog meter thatMoreThe receiver goes parallel with the wire path. And when you turn it on there's an analog meter that you'll watch when the needle bounces to the right that's the direction of the fault.
How do you fix a leaky sprinkler system?
0:562:33City of Roseville California-Sprinkler Valve Leak Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you don't immediately see the water running you can use a turkey baster to remove the water fromMoreIf you don't immediately see the water running you can use a turkey baster to remove the water from the valve. And then wait a few minutes to see if it fills back up.
How long does underground sprinkler system last?
around 20 yearsHow Long Do Sprinklers Last? The average lifespan of a professional in-ground sprinkler system typically is around 20 years with consistent winterization and care.
How long do sprinkler pipes last?
Nozzles should usually be replaced after two years, depending on water quality and climate. The pipes are the most durable component and will last the longest, being shielded from direct sun damage and other external factors, and you can expect them to last for up to 40 years before you'd need to replace them.
How long should a lawn sprinkler system last?
How long is the life expectancy of the average sprinkler system? This system can last up to 20 years, but you'll likely experience minor breakdowns every 3-10 year, depending on how much you invest in the quality of your sprinkler system. You should also be sure to inspect your sprinkler system as least once a year.
How long do sprinkler valves last?
10 to 15 yearsOne of the components that you may need to replace regularly are the wires, often due to improper installation and corrosion. Valves will give you 10 to 15 years of service, while controllers 5 to 10 years.
How do you know if sprinkler solenoid is bad?
Signs You Have a ProblemThe Water Won't Shut Off. If you have this problem, it's very likely the solenoid. ... Low or Uneven Water Pressure. The solenoid controls the water pressure. ... Water Leaks. There are many points in a sprinkler system that can leak. ... Current Testing. ... Valve Inspection. ... Parts Replacement.
How do you fix a leaky sprinkler valve?
0:3313:41Fixing A Sprinkler Valve "Quick Fix," No Glue - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the tops on the sprinkler valve that's already down in the ground. And it needs to have itMoreWith the tops on the sprinkler valve that's already down in the ground. And it needs to have it replaced because the valves leaking it won't shut off with the timer. So.
How do you replace a sprinkler solenoid valve?
0:211:26Replacing the Solenoid: Rain Bird Residential Valve TroubleshootingYouTubeStart of suggested clipEnd of suggested clipFirst shut off the main water supply to your irrigation. System disconnect the wires to the solenoidMoreFirst shut off the main water supply to your irrigation. System disconnect the wires to the solenoid. By cutting them or by unscrewing the wire nuts. Turn the solenoid counter clockwise to remove.
How much does it cost to fix a sprinkler system?
The average cost to repair your sprinkler system is $75–$250, with the average homeowner paying $212, which includes an hourly labor cost of about $75 by a professional plumber. Most sprinkler repairs involve replacing sprinkler heads at $5 to $20 per head, or replacing valves at $20 to $40 per valve, not including the cost of labor.
How much does it cost to replace a sprinkler valve?
The cost to replace a sprinkler valve is around $65–$290 which includes labor. This could be caused by debris in the valve or a broken valve, so the valve will need to be located, possibly excavated, and cleaned out or replaced. Sometimes, valves can be rebuilt instead of replaced.
Why do sprinklers need to be fixed?
The main reasons your sprinkler system will need to be fixed can include a damaged backflow preventer, faulty valves, broken sprayer heads, a malfunctioning sprinkler system controller, and/or broken or leaking pipes.
How much does it cost to install a sprinkler system controller?
Installing a new sprinkler system controller and timer will cost $150 to $225 on average, plus labor. However, your technician may only need to reprogram or rewire your unit, at an average cost of $80. If wiring is an issue you can expect to pay $1 per sq. ft. including labor, and sometimes you may need to hire an electrician at $50 to $80 per hour.
How much does it cost to replace a backflow prevent?
Replacing a backflow prevent costs around $150 to $400 just for the part, plus $50 to $200 for professional labor expenses. A state-certified backflow tester will need to check out the problem and provide a solution.
How much does it cost to replace a water system?
Some homeowners can save up to 40% or their original water usage with the replacement. The replacement cost will be approx. $0.04 per square foot of ground watered plus the cost to remove the old system of $40–$85/hour.
When do sprinklers go out?
Typically a sprinkler system will start to go out around at 20 years old. Consistently be on the lookout for water bubbling around heads, zones that won't turn on, or dry spots in your yard. If you see any of these problems or broken parts, call a pro to evaluate.
How much does it cost to repair a sprinkler system?
(Photo courtesy of Hunter Industries) Repairing a lawn sprinkler system costs an average of $250. Most jobs range between $130 and $380.
How much does it cost to replace a valve?
Some heads can cost as much as $30 each, and brass valves range to $100 or more. Valve replacement averages about $12.50 to $40 per valve in addition to labor. The valve controls the release of water to the various zones in the yard.
How much does it cost to repair a burst water pipe?
In colder temperatures, an improperly winterized system can cause a pipe to freeze or break. The cost to repair a burst pipe ranges from $150 to $350, not including the expense to fix water damage.
Can a plumber fix a timer?
In most cases, your plumber should be able to repair or replace this for you. Sometimes, you may need an electrician. But before making the call, confirm that the timer program is set correctly for each zone. If you feel comfortable doing so, turn off power to the circuit and check the wiring on the controller.
How much does it cost to replace a sprinkler system?
The cost to repair a sprinkler system ranges from $131 and $390, averaging $256. Replacing sprinkler heads runs $2.50 to $18 per head for most types, plus a range of $50 to $100 per hour for labor by a professional plumber. Valve replacement averages about $12.50 to $40 per valve in addition to labor. Some heads can cost as much as $30 each, and brass valves range to $100 or more.
How much does it cost to fix an irrigation system?
With a range of $125 to $375, the cost of irrigation repair often depends on the part. Repair for a broken piece usually requires replacement, especially for less-expensive components. Plumbers typically mark up the price they pay for the parts by 25-50%, in addition to the average $50 to $100 per hour for labor.
What is a sprinkler system?
Sprinkler systems are a great way to maintain your lawn. They take the hassle out of managing it yourself and ensure that the lawn gets evenly watered at the right time of day. If you start having problems with your system, it can be tough to figure out what to do.
How much does it cost to install a backflow preventer?
Installing a new backflow preventer costs $125 to $900 for the part, plus $25 to $250 for professional installation. This tool keeps water from flowing back toward the supply source. Annual testing ranges from $50 to $100 and can help ensure that the preventer continues to perform.
How much does it cost to hire an electrician?
Sometimes, you may need an electrician. The expense to hire an electrician runs $50 to $100 per hour. Before making the call, confirm that the timer program is set correctly for each zone. If you feel comfortable doing so, turn off power to the circuit and check the wiring on the controller.
How to save money on sprinkler system repairs?
How to save money on future repairs. Stay on top of irrigation and sprinkler maintenance to prevent expensive repairs down the road. Follow these tips to save money on sprinkler system repair: Clean your sprinkler heads and valve to remove dirt, grime and other residues. Keep tabs on the water pressure.
What happens if your sprinkler system leaks?
If you've noticed that your sprinklers have a leak, the water pressure is low, the valve is broken or the sprinkler head is clogged, it might be time to enlist a contractor's help. The cost of sprinkler system repairs will depend on several different factors covered in the sections below. However, one of the most important factors is where you live.
How much does a sprinkler guy cost?
The Sprinkler Guy: $35 per 30 minutes after the first hour. There are potential downfalls to both flat and hourly cost estimates for irrigation system repair. While a flat rate makes it easier to budget, a company may like to err on the side of caution when deciding on the fee.
How much does it cost to fix a sprinkler system?
Sprinkler system repairs tend to cost between $70 and $85, with a national average cost of $75. Low-end sprinkler repair can cost as little as $45 to $65, while high-end repairs can range from $91 to $300.
How to winterize sprinklers?
Winterize your sprinklers by draining the water and turning it off during the cold winter months.
Can you fix a PVC sprinkler head?
Your total repair cost will depend on the type of damage done to your irrigation system. Perhaps someone took out a sprinkler head or two when they parked on the grass. This will likely involve minimal labor and a couple of replacement parts. However, a PVC pipe bursting underground from freezing weather could include digging and landscaping to fix the broken section.
Can I fix a large irrigation system for free?
Fixing a large irrigation system could require lots of different valves, sprinkler heads, pipes and many labor hours. The larger the job, the more you can expect the repair company to do for free.
How much does a sprinkler system cost?
Sprinkler systems cost $500 to $1,000 per zone with installation. The average yard requires at least 3 to 5 zones. Irrigation zones are areas of the yard with different watering needs based on sun exposure and whether they feature turf, shrubs, or flower beds.
How much does an above ground sprinkler cost?
Above-ground sprinklers cost $10 to $40 each on average and cover up to 4,500 square feet. Above-ground sprinklers connect to a standard hose on the surface of the lawn and may be moved to different areas as needed.
How much does it cost to install irrigation systems?
Commercial irrigation systems cost $1,000 to $7,000 per acre to install and typically include a combination of furrow, drip, and pivot irrigation. Commercial irrigation systems cost less per acre than residential irrigation systems because the price per acre drops for large-acreage projects.
How many sprinkler heads can be in one zone?
Never put different sprinkler head types in the same irrigation zone. They have different flow rates and water application rates. A single zone may support 1 to 9 sprinkler heads, depending on the water pressure, flow rate, and type of heads.
How much does it cost to add a sprinkler zone?
Cost to add a sprinkler zone. The cost to add a zone to an existing sprinkler system is $300 to $700, depending on the zone type, sprinkler head type, and site conditions. Adding a sprinkler zone requires installing a new valve and may require upgrading the controller.
How much does drip irrigation cost?
A drip irrigation system costs $300 to $1,200 per zone or $500 to $4,000 per acre. Drip irrigation is a system of flexible tubing or drip lines that carries water directly to the plant base via drippers, conserving water and reducing weed growth and disease.
What is the difference between above ground and in ground sprinkler systems?
Drip irrigation distributes water directly to plants through tubing on the surface. Above-ground irrigation uses sprinklers connected to hoses on the surface and is typically a DIY project.
