how to repair a swivel rocker recliner

^{How to Repair Swivel Rocking Chairs}

1. Determine the Problem Examine the gas mechanisms, if applicable, to see if they look worn, if the seat lowers and rises when not in use, if leaning back ...
2. Replace Faulty Gas Cylinder Lay the swivel rocking chair on the floor. Remove the base with casters by loosening the clip and washer under the base. ...
3. Replace Faulty Manual Mechanisms Use the adjustable wrench to remove the base and casters to gain access to the washers. ...
4. Repair Damaged Wood

Full Answer

Can you use a swivel Rocker as a recliner?

One of the best features of a swivel rocker is it can be used as a recliner when raised. If you are having problems with your swivel rocker recliner, there are several things that you can do to repair it, instead of replacing it. Buy new swivel clips.

How do you fix a swivel on a rocking chair?

Turn the chair over so you have access to the swivel on the bottom side of the chair. Use a screwdriver or a wrench to remove the screws or bolts holding the base onto the swivel. Check the swivel's clips to see if they are worn or broken.

How to repair a recliner mechanism?

The first thing that you need to do when trying to repair your reclining mechanism is to turn your recliner over. That way, you will be able to see all of the different parts more easily. You should tighten any loose bolts that attach the mechanism to the footrest.

How to fix a recliner sofa without zippers?

If your chair’s cushions don’t have zippers, you can get a recliner sofa repair kit online and: Turn your recliner upside down. Ensure the springs aren’t damaged. Extend your footrest to reduce the risk of injury. Start on one part and introduce the stiff foam insert underneath the spring.

How do you fix a swivel chair base?

1:354:42How to Fix a swivel chair. Repair a loose turntable and ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we're going to rip the base plate off I have the right-sized allen key and my. Drill. So we canMoreSo we're going to rip the base plate off I have the right-sized allen key and my. Drill. So we can just get to these balls here put this onto the tightening up.

How do you stabilize a swivel recliner?

0:171:56HOW TO : Lock a Swivel Glider Recliner - YouTubeYouTubeStart of suggested clipEnd of suggested clipPosition lower the lever to release the reclining lock feature. And sit straight up the back of theMorePosition lower the lever to release the reclining lock feature. And sit straight up the back of the chair will rise to a vertical position to reach under the left arm of the chair near the base.

How do you fix a rattan swivel chair?

How to Repair a Rattan ChairSand the Weave. Sand the sides of the rattan at the points where it will be reattached, using 200-grit sandpaper. ... Apply Wood Glue. ... Join the Pieces Together. ... Removed the Damaged Weave. ... Soak the New Weave in Water. ... Interlace the Weaves. ... Glue the Weaves Into Place. ... Trim Off Excess Pieces.

How do you remove a swivel base from a recliner?

1:066:23Lazboy Swivel base replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipInstead grab your drill and long extension with a t25 bit and remove the screws that attach theMoreInstead grab your drill and long extension with a t25 bit and remove the screws that attach the rocker Springs to the rocker base.

How do you fix a broken rocker recliner?

1:268:13How to Repair a La-z-boy Rocker Recliner Base - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's not broken shattered or split. It can be reglued and repaired. However if yours is broken. You'MoreIt's not broken shattered or split. It can be reglued and repaired. However if yours is broken. You'll have to order a replacement unit from lazy boy the manufacturer or one of their dealers.

Can you lock swivel chairs?

It usually looks like two plates with a swivel mechanism between them. Drill a hole through both the top and bottom plates (use a drill bit made for metal), then insert a screw. This will lock your seat so it doesn't swivel, creating a stationary stool.

How do you change the mechanism on a swivel chair?

0:422:16Replacement of Swivel Tilt and/or Plastic Inserts for Chromcraft ...YouTubeStart of suggested clipEnd of suggested clipPlace your foot on the back of the seat grab ahold of base and put it firmly towards you once it isMorePlace your foot on the back of the seat grab ahold of base and put it firmly towards you once it is removed. If the plastic insert is still attached to the mechanism. That needs to be replaced.

How do you install a swivel rocker mechanism?

1:023:08How to Install a Rocker Swivel on an upholstered chair - YouTubeYouTubeStart of suggested clipEnd of suggested clipFront. So obviously you're going to put that on the board facing the front of the chair. And in thisMoreFront. So obviously you're going to put that on the board facing the front of the chair. And in this particular chair the mechanism the rocker swivel mechanism goes in the middle.

Can rattan be repaired?

Loose strands of rattan or cane can just be glued back into place with Superglue. If there are pieces of weave missing, replace with new material, usually available from a craft outlet. Cut the old strands out back to good cane.

How do you put a swivel base on a rocker recliner?

0:008:00La-Z-Boy Swivel Base Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo when you turn it upside down you'll see that there's a two places where you've got Springs. AndMoreSo when you turn it upside down you'll see that there's a two places where you've got Springs. And three screws attaching them to the rocker. Base. You can remove these screws.

How do you put a swivel base on a chair?

1:164:52Convert upholstered chair to swivel - YouTubeYouTubeStart of suggested clipEnd of suggested clipI take one of these carriage bolts and stick it into the squared hole. The holes here are squareMoreI take one of these carriage bolts and stick it into the squared hole. The holes here are square around a swivel and so is the carriage bolt. It's got a square. You pick that on.

How do you change the legs on a swivel chair?

0:131:18Best Xpress Installing Legs on Your Swivel Chair - YouTubeYouTubeStart of suggested clipEnd of suggested clipRemove the bag from the chair. The legs should be located in the seat of the chair. Flip the chairMoreRemove the bag from the chair. The legs should be located in the seat of the chair. Flip the chair over and remove the legs and bolts from the package. Place the wooden dowel in the hole on the base.

How do you stop a swivel chair from moving?

Fit a small rubber wedge under the chair, between the base and the swiveling pole. Hammer the wedge gently into the base so it creates a seal between the chair's base and the pole it sits upon. Don't hammer too hard or you could damage the chair. The wedge will cause friction and will limit the chair's range of motion.

Can you make a swivel recliner not swivel?

Stop your recliner swivelling by adjusting screws on the base. Many recliner models feature a swivel function that lets the user rotate the chair using his feet. This feature is useful for changing the direction of the chair.

How do you lock a recliner chair?

3:207:51Closer Look: Tilt Lock For Ergonomic Office Chairs - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt slide it out. And then you can lock it in the position by sliding it back in. So very basicMoreIt slide it out. And then you can lock it in the position by sliding it back in. So very basic system but pretty common on lower end chairs.

How do you stop a glider chair from gliding?

0:347:06GLIDING TOO MUCH !! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I noticed a little rub marks right here. This bar actually hits the upright to act as a stop.MoreAnd I noticed a little rub marks right here. This bar actually hits the upright to act as a stop.

What is the easiest part of a recliner to repair?

Recliner Frame – The frame is the easiest part of any recliner to repair, simply because this usually only consists of metal, wood, and screws. Check the screws from time to time to make sure that they are not coming loose. Reclining Mechanism – The reclining mechanism is the lever that allows you to move the footrest into a reclining position.

What is a recliner chair?

A recliner is the centerpiece of most households. These chairs are a great place to kick back, relax, and recover after a hard day’s work. Unfortunately, since these chairs are so popular in a home, they get used a lot. This heavy use can make them break down over time.

What is the hook on the footrest on a chair?

There will be a small hook that is supposed to latch onto the footrest and prevent you from accidentally reclining in your chair. This latch can work itself loose, so be sure to tighten it up as much as possible so that it works correctly.

What happens if a reclining chair is loose?

If that is the case, all you have to do is tighten up the bolts that hold it in place. From there, you can usually end your repairs, as long as the cable/lever remains in the correct position.

What is the footrest on a recliner?

Footrest – The footrest is both part of the frame and the reclining mechanism. This piece of the recliner gets used all of the time, so it is a good idea to make sure it is in working order every once in a while. Padding – The padding in your recliner is what makes it such a comfortable chair.

What is a reclining mechanism?

Reclining Mechanism – The reclining mechanism is the lever that allows you to move the footrest into a reclining position. If this breaks down, you will not be able to recline your chair, which is, obviously, less than ideal. Springs – The springs in your recliner help to provide some of the cushioning that make your recliner so comfortable.

Why is my recliner footrest jammed?

If the footrest on your recliner becomes jammed, the first thing you need to do is turn the recliner over and examine it. The most likely cause for this is that something is misaligned. Look for any loose bolts on the frame of the recliner, as these can cause it to pull to one side, which, in turn, could make the footrest become jammed.

How to fix a rocker that squeaks?

Apply wood glue to any joint that's loosened and secure with an appropriate sized clamp. Allow the chair to completely dry for 24 to 48 hours before using it or testing it to make sure the rocker no longer squeaks. Replace loose or broken dowel pins with new pins and wood glue. Tighten any loose screws or replace them.

Why do swivel rockers break?

How to Repair Swivel Rocking Chairs. When swivel rocking chairs break, in most cases the cause of the problem is metal rubbing against metal. This causes a part to wear out easily either from abuse or age. If your swivel rocking chair breaks down, the only way you'll be able to permanently fix it is to replace the worn parts.

Why do rocking chairs break?

When swivel rocking chairs break, in most cases the cause of the problem is metal rubbing against metal. This causes a part to wear out easily either from abuse or age. If your swivel rocking chair breaks down, the only way you'll be able to permanently fix it is to replace the worn parts. Sometimes the worn parts aren't available ...

Why is my swivel not working?

Be sure to look at the races, springs or ball bearings that could be the reason why a swivel is no longer working. Check all wooden joints to see if there are any loose pieces of wood, missing or loose screws, or broken dowels.

How to tell if a gas chair is worn?

Examine the gas mechanisms, if applicable, to see if they look worn, if the seat lowers and rises when not in use, if leaning back causes the chair to lower, if nothing happens when the lever is pressed, and if the seat is stuck in one position. Pay special attention to the adjustable height cylinder since this is the only part that can be replaced by the do-it-yourselfer. It may be difficult to tell if the cylinder is damaged. Test the gas lever and see if there are any strange noises coming from the cylinder or if the chair no longer raises or lowers.

How Do You Fix a Stuck Recliner in an Open Position?

First, we measure the seat’s width and height. Then, we used a 1/4″ solid angle jig to adjust the seat for a proper recline angle. We also needed to adjust the lever that adjusts the seat height.

How Much Does It Cost to Repair a Recliner?

The average cost of repairing is around $175. However, that doesn’t mean that’s how much you’ll have to pay:

Why Won’t My Electric Recliner Go Down?

I am rethinking the whole electric recliner. The motor has some kind of short that makes it impossible to recline with it. I changed the position of the legs so they no longer hit the switch, but it is still impossible to recline the chair. I will give you an update. It seems to be getting worse. How often do we try to get an electric recliner down from the “up” position by trying to push the buttons in the “down” position but when we do, nothing happens?

Can a Recliner Be Repaired?

The answer is YES!! According to the enclosed instructions I’ve attached, it’s done-able. If you’ve had your chair for a while, the plastic will be soft and flexible. Depending on the age and location of the rip, and what fabric it is, the chances are pretty good that the repair is actually doable, but obviously, it’ll take some time and effort. I put it on a friend’s chair once and it didn’t take too long. Also, it depends on how much the damage is and how much it’s warped. Maybe you should have it checked out by your chair shop first. I read somewhere that the original padding that was in the base was soft fabric or padded fabric, so the recliner would still be able to use this padding even after repair.