Fortunately, you can troubleshoot and repair the Troy-Bilt Pony riding lawnmower, in many instances without replacing engine parts. Check your gas tank and fill it if the fuel is low. Add a little fresh gas to any old gas in the tank that you need to get rid of. Turn on the mower and allow it to run idle and burn away all the old fuel.
Full Answer
Is Troy Bilt now Craftsman?
The Craftsman name is now owned by Stanley, Black & Decker (SBD). SBD is having the Craftsman mowers built for them by MTD. Troy-Bilt is a brand owned by MTD. About 80% of the parts are the same for comparable mowers in the individual lines.
Is Troy Bilt an American company?
Troy Bilt is an American company known for making the first residential rototiller in 1937. In the past 84 years, it has perfected the art and science of building a wide range of rugged but effective lawn care power tools, from riding mowers to edgers. One of the company’s biggest selling points is its rigorous quality standard.
How does Troy Bilt electric start work?
- Electric start adapter eliminates pull starts
- Allows you to turn any power drill into a jumpstart engine starter
- Simply add the bit to your power drill and plug the bit into your handheld equipment
- Compatible with all Troy-Bilt jumpstart capable products including string trimmers, lawn edger's, leaf blowers and cultivators
How to install belt on Troy Bilt riding lawn mower?
Step-by-Step Guide: How to Tighten Belt on Troy Belt Riding Mower?
- Look for a Proper Area. Working with a riding mower can be difficult because of their size. ...
- Prepare the Mower. Now that you’ve found the perfect place to work with your Troy Bilt riding mower, then it’s time to prepare it.
- Remove the Deck Cover. ...
- Remove the Blade. ...
- Expose the Belt. ...
- Adjust the Belt. ...
- Reinstall Everything. ...
- Reconnect and Test. ...
How do you troubleshoot a Troy Bilt lawn mower?
0:042:20Reasons why your riding mower won't start | Get Running with Troy-BiltYouTubeStart of suggested clipEnd of suggested clipPotential reasons for your mower not starting are fuel related issues improper engine operationMorePotential reasons for your mower not starting are fuel related issues improper engine operation spark plug issues a disengaged parking brake or engaged blades.
Why does my Troy-Bilt riding lawn mower won't start?
It may sound simple, but if your mower will not start, try turning off the mower blades or PTO shaft, set the brake, and try starting it again. The parking brake must always be fully engaged when starting. Next, check the fuel level in the tank, and be sure to always use fresh fuel if the tank is low.
How do you take apart a Troy Bilt lawn mower?
0:2918:26Troy-Bilt Lawn Mower Disassembly (Model 12AVB2RQ766) - YouTubeYouTubeStart of suggested clipEnd of suggested clipDown using a 9 16 inch socket unthread the nuts securing the two front wheels remove both wheelsMoreDown using a 9 16 inch socket unthread the nuts securing the two front wheels remove both wheels slide off the two drive gears along with the wheel.
Why does my lawn mower only run for a few seconds then dies?
If your lawn mower starts, runs briefly, then dies these are the four most common reasons that's happening: Dirty carburetor / clogged carburetor bowl. Old gasoline that has gone bad. Dirty or defective spark plugs.
What should I check when my riding mower won't start?
Your Mower Won't Start:Loose, Dirty or Disconnected Spark Plug in Your Lawn Mower: Check it out, clean off debris, re-connect and tighten.Dirty Air Filter: Clean or replace.Fuel Not Reaching the Engine: Tap the side of the carburetor to help the flow of gas. If this doesn't work, you might need a new fuel filter.
Why is my mower turning over but not starting?
Dirty Air Filter An air filter that's not letting enough air into the motor can inhibit combustion. Locate the air filter on your mower and remove the plastic cover. If the filter is covered in dirt, grass, or some other contaminant, this may be the reason for your lawn mower turning over but not starting.
How do I remove the cover from my Troy Bilt lawn mower?
1:383:20Troy-Bilt Lawn Mower Front Transmission Cover Replacement ...YouTubeStart of suggested clipEnd of suggested clipPull the wheel adjustment lever outward to properly align the front of the cover. Replace the nineMorePull the wheel adjustment lever outward to properly align the front of the cover. Replace the nine screws to secure the cover starting with the lower.
How do you change the throttle cable on a Troy Bilt riding lawn mower?
0:101:50How to Replace the Control Cable on a Troy-Bilt TB280ES Lawn Mower ...YouTubeStart of suggested clipEnd of suggested clipIt's secured on this end with a couple of plastic tabs that I'll just squeeze with a pair of pliers.MoreIt's secured on this end with a couple of plastic tabs that I'll just squeeze with a pair of pliers. And then the cable housing will pull away from the engine.
How do you fix a self propel cable on a lawn mower?
0:142:43Replacing the Drive Cable on a Lawn Mower - YouTubeYouTubeStart of suggested clipEnd of suggested clipWork gloves to protect your hands. Now let's get started disconnect the spark plug wire from theMoreWork gloves to protect your hands. Now let's get started disconnect the spark plug wire from the spark plug pivot the cable clip up and release it from the mower handle release.
How do you fix a lawn mower that starts then dies?
0:364:31Lawn Mower starts and then dies, turned out to be an easy cheap fixYouTubeStart of suggested clipEnd of suggested clipLook move the carburetor around and try to figure out which bolts are loose. The bolts that hold theMoreLook move the carburetor around and try to figure out which bolts are loose. The bolts that hold the carburetor on are still tight.
How do you clean a carburetor on a lawn mower without removing it?
Use Carburetor Cleaner Fortunately, you can generally do this without even taking the carburetor out of the engine. Start by purchasing some commercial lawnmower carburetor cleaner, which comes in a simple spray can and will make it easy to clean the inside and outside of the carb.
How do you fix a lawn mower that won't stay running?
0:166:26How To Fix Lawn Mower That Wont Stay Running! - YouTubeYouTubeStart of suggested clipEnd of suggested clipMy back or look for tools or anything like that. So the kit that I use to rebuild the carburetor.MoreMy back or look for tools or anything like that. So the kit that I use to rebuild the carburetor. And air filter and all cost less than ten dollars off of Amazon.
How do you clean a carburetor on a Troy Bilt riding lawn mower?
0:178:48* 21 inch troy-bilt tb320 carburetor cleaning briggs and stratton 625 ex ...YouTubeStart of suggested clipEnd of suggested clipFirst step is take the air filter cover off and I'll take the air filter.MoreFirst step is take the air filter cover off and I'll take the air filter.
How do you clean a carburetor on a Troy Bilt?
Spray carburetor cleaner down the throat of the carburetor and around the throttle plate. Work the throttle, either manually or by lever control based on the engine model, to loosen any deposits of debris. Spray again, if necessary, with the carburetor cleaner spray.
How do you take the front wheel off a Troy Bilt riding lawn mower?
1:084:57How to Replace the Front Wheels on Your Riding Lawn Mower - YouTubeYouTubeStart of suggested clipEnd of suggested clipPin then just use a hammer and tap on the pliers. Until you get it all the way. Out. Then there is aMorePin then just use a hammer and tap on the pliers. Until you get it all the way. Out. Then there is a washer that needs to be removed. And then you can go ahead and slide off your wheel.
How do you put a mower deck back on a Troy Bilt Pony?
4:016:10Troy-Bilt Pony | How to Remove Your Deck / Put it Back On - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing you want to do is hook the spring back up to the idler arm. So you want to go below theMoreFirst thing you want to do is hook the spring back up to the idler arm. So you want to go below the belt. And hook it into this hole.
1 – Fuel and Air
Your fuel and air system can cause problems with your Troy Bilt Riding mower in several different ways. For example, old or incorrect fuel may not run the engine at all.
2 – Disengaged Parking Break
Any time you stop your Troy Bilt Riding mower, please follow the manufacturer-recommended steps. First, turn off the blades using the PTO, then put your transmission in neutral.
3 – Engaged Blades
You cannot get your Troy Bilt Riding mower to move without disengaging the blades and putting the parking brake on.
4 – Belts
The drive belt on your Troy Bilt Riding mower does what it sounds like. It drives the engine. As Sears points out, “The ground drive belt connects the engine crankshaft to the transaxle pulley to drive the rear wheels. If the belt breaks, the lawn tractor won’t move.”
5 – Spark Plug Problems
Your spark plug moves power through your Troy Bilt Riding mower. Without it, nothing moves. Happily, cracked, damaged, or rusted spark plugs are the easiest part to identify and change.
Related Posts
Lawnmower blades can spin at an astounding three-thousand rpm. The crankshaft that turns the blades moves because of the deck belt attached to it. Power from the engine turns a small wheel, and...
Question: Repairing a Troy-Bilt Riding Mower?
How do I find someone who can fix a Troy-Bilt riding lawn mower? I need new blades, belts, and a tire replaced. That's all. I need someone who is honest and that I can trust.
Question: Troy-Bilt Riding Mower Won't Start?
I have a Troy-Bilt riding mower that I can't start. I have a new battery and have checked all the safety switches, but I can't get it to crank over. My question is where do I go next?
Question: Troy Bilt TB30R Mower Won't Start?
I hit a rock that stalled the motor. It won't restart. It's totally dead. There is no electrical power to the starter.
Question: Adjusting Riding Mower for Short People?
I just bought a 06 Troy Bilt riding mower. I'm a short person, how do I fix it to where I can drive it and reach the brake pedal the same time?
Question: Troy-Bilt Riding Mower Won't Move?
My mower won't go forward or backward. The engine runs and the blade turns, but it won't go forward or back when shifting. It quit while I was cutting the grass. Could it be a belt issue?
Question: Troy-bilt Mower Speed Control Lever Not Working?
Why would a CVT Troy-bilt lawn mower with a 7 speed control lever not have any change in speed when the lever is shifted? The lawn mower is 15.5 hp motor and is only 3 years old.
Question: Replacing the Belt on a Troy-Bilt Mower?
I am trying to replace the belt on my Troy-Bilt 42" riding mower, and I don't know how to get it past bar that is apparently in place to prevent the belt from slipping off.
