how to repair dvd drive not reading

^{Fix CD or DVD Drive Not Reading Discs in Windows 10}

• Method 1: Rollback CD or DVD drive drivers
• Method 2: Uninstall CD/DVD drive
• Method 3: Run Hardware and Devices Troubleshooter
• Method 4: Disable and then enable the DVD or CD drive
• Method 5: Registry Fix
• Method 6: Create a Registry Subkey

How to fix CD not reading in Windows 10?

Fix CD or DVD Drive Not Reading Discs in Windows 10 Method 1: Rollback CD or DVD drive drivers. Method 2: Uninstall CD/DVD drive. After the computer restarts, the drivers will be automatically installed. Method 3: Run Hardware and Devices Troubleshooter. Method 4: Disable and then enable the DVD ...

How to fix DVD drive not working in Windows 10?

How to Fix a DVD or CD Drive Not Working or Missing in Windows 10 Use Windows Update to Fix Windows 10 DVD Drive Issues. It’s not unusual for your optical drive to be working just fine... Reinstall or Update Driver in Device Manager. Boot to the Windows 10 desktop, then launch Device Manager by ...

How to fix DVD/CD ROM drive won't expand?

Click on DVD/CD ROM- drives to expand, right click on the device and click on Uninstall. Once you are done uninstalling the driver, restart the computer. It will automatically install the generic driver.

How do I know if my disc drive is bad?

If, after cleaning the drive and CDs, you still get errors, it's likely the disc drive is bad. Open the Control Panel. Click or double-click the System icon. In Windows XP and earlier, click the Hardware tab and then the Device Manager button. In Windows Vista and later, click the Device Manager link on the left side of the System window.

How do you fix a DVD drive that won't read discs?

Update or reinstall the driver for the optical drive. Uninstall and reinstall the Dell provided playback software (DVD or Blu-ray movie playback issues) Perform a Windows System Restore. Restore your computer to factory defaults.

Why DVD is not detected?

Check Your BIOS/UEFI Settings and Update Chipset Firmware If your CD/DVD drive isn't detected by Windows, make sure the drive is working and recognized in your computer's firmware. Check out our article for instructions on how to load your BIOS or UEFI firmware interface.

How do I reset my DVD drive?

How to Reset a CD/DVD DriveRestart your computer. After it starts to back up, push the eject button on the DVD player if it was not working properly. ... Find a small opening below the eject button on the outside of the drive. ... Clean the laser lens on the DVD drive with the appropriate cleaner and a lint-free cloth.

How do you check if the DVD drive is working?

If not, refer to the Dell Knowledge Base article Optical Drive is not recognized in Windows.Press the Windows key + R to open the Run dialog box.In the Run dialog box, type devmgmt. msc then press the Enter key.In the Device Manager window, expand DVD/CD-ROM drives. Verify that the optical drive is listed.

What is the code for Windows not loading the device driver?

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41) This issue may have occurred after one of the following situations: You upgrade the Windows operating system.

How to delete corrupted registry entries?

To use Registry Editor to delete the corrupted Registry entries, follow these steps: Press the Windows logo key + R to open the Run dialog box. Type regedit in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or select Allow.

Why won't my DVD player read a disc?

Why Your DVD Player Doesn’t Read a Disc. The possible reasons are : The DVD doesn’t sit properly on the disc tray. The DVD is dirty or damaged (see below for a fix) The DVD disc format is not compatible with the DVD player. This happens when a burned DVD is used. Some older DVD players accept only DVD+R or DVD-R only.

What to do if you have a scratch on a DVD?

If a scratch is visible to the eye, then use a DVD cleaning kit – scratch remover – disc repair kit.

Can a DVD player read a DVD?

The DVD player doesn’t support the DVD region. For example, you can’t play a Region 2 DVD (Europe) over a Region 1 DVD Player (USA). If you want to play an out-of-region DVD, you would have to use one of the Best Region-Free DVD Players. The above are the possible reasons why a DVD player can’t read a DVD.

How to fix a CD drive that won't boot?

Right-click on your CD/DVD drive and click on Properties. Navigate to the Driver. If the option is present, click on Roll Back Driver. Wait for the driver to be rolled back and close the Device Manager once it has. Restart your computer and check to see whether or not the issue still persists once it boots up.

How to uninstall a CD drive?

Right-click on the Start Menu button to open the WinX Menu. Click on Device Manager. Right-click on your CD/DVD drive and click on Uninstall. When presented with a warning, click on OK. Wait for the device to be uninstalled and close the Device Manager once it has.

What to do if method 1 does not work?

If Method 1 does not work for you, perhaps you will be able to overcome this issue by uninstalling your computer’s CD/DVD drive. If you plan on using this method, fear not as your computer will automatically reinstall its CD/DVD drive (and its drivers) soon after you have uninstalled it.

What to do if your CD isn't detected?

If your CD/DVD drive isn’t detected by Windows, make sure the drive is working and recognized in your computer’s firmware. Check out our article for instructions on how to load your BIOS or UEFI firmware interface. If you see your optical drive listed in the BIOS, that’s a good sign.

What does it mean when you don't see your CD drive in BIOS?

If you see your optical drive listed in the BIOS, that’s a good sign. If you don’t see your CD/DVD drive in the BIOS/UEFI, then something is definitely awry. Depending on the age of your system, there is a possibility your chipset drivers for your motherboard might be out of date.

How to uninstall optical drive in Windows 10?

Boot to the Windows 10 desktop , then launch Device Manager by pressing Windows key + X and clicking Device Manager. Expand DVD/CD-ROM drives, right-click the optical drive listed, then click Uninstall. Exit Device Manager then restart your computer. Windows 10 will detect the drive then reinstall it. You can also use the option to Update Driver Software from within Device Manager.

How to stop Windows 10 from updating drivers?

Click Start > Settings > Update & security. Make sure that your system is up to date and there are no hardware driver updates to install. If you get a CD/DVD driver that works for you, you might want to consider stopping Windows 10 from automatically updating drivers in the future.

Do I need a DVD drive to install Windows 10?

This is unfortunate since many users still depend on CDs and DVDs. In fact, you might even need to use a DVD drive to install Windows 10 on your computer. One of the common complaints I have encountered among users is the loss of their DVD or CD drive after upgrading.

Is a CD drive considered legacy?

Here are some quick and easy fixes that might get you up and running again. This might make you feel old, but CD/DVD drives are now considered legacy hardware. As Windows 10 continues to modernize the operating system, support for such older hardware technology as optical drives is becoming increasingly spotty.

Does Windows 10 support Blu-ray?

Windows 10 does not include native DVD Playback, neither does it support Blu-ray media. If you want to do this inWindows 10, you need to install compatible software that supports your optical drive. Microsoft provides a universal DVD playback app for purchase from the Windows Store. If you don’t want to purchase software, you can check the manufacturer’s website to find out if they have supported software you can use to view your media. Third party software such as VLC Player might work with your media, and it’s free too.

How to check if a CD-ROM is red?

Open the Control Panel. Click or double-click the System icon. In Windows XP and earlier, click the Hardware tab and then the Device Manager button. In Windows Vista and later, click the Device Manager link on the left side of the System window. Within Device Manager, verify the CD-ROM has no exclamation marks or red X's.

What does it mean when a CD is dirty?

Bad or dirty CD. Make sure you have tested more than one CD in the disc drive, as it may be one CD that is bad or dirty. If all but one or two discs fail, the disc drive is bad or dirty. For instructions on cleaning your CDs and disc drive, see the computer cleaning page.

How to check if my computer is 32 bit?

If you are using Windows 98 or Windows 95, verify the computer is running in 32-bit mode by clicking Start, Settings, Control Panel, double-click System, and click the Performance tab. Under Performance by File System, verify it says '32-bit'.

Can you connect a CD-ROM cable improperly?

CD-ROM cables connected improperly. If you have recently installed or moved your computer, verify that the CD-ROM cables are connected correctly. If the disc drive is not opening when you press the eject button, verify the CD-ROM power cable is firmly connected. How to verify CD-ROM cables are correctly connected.