A summary of the repair process
- Fully separate the temple (arm) from the frame of your eyeglasses.
- Hook the hole of the spring hinge onto something that will give you extra grip.
- Pull on the temple to fully extend the spring hinge.
- Insert a paper clip or push pin into the gap that opened to keep the hinge in its extended position.
- Take the temple and align it with the...
Full Answer
Where can I get my eyeglass spring hinges repaired?
If you need your eyeglass spring hinges repaired, contact All American Eyeglass Repair. Get the details on how to mail them for repair at one of our repair centers or visit any one of our 17 store locations.
Do you have to extend the hinge on glasses?
On glasses with standard barrel hinges, you won’t need to extend the hinge first. You can just screw a replacement temple screw in, or tighten it, if it is loose. Provided that the hinge is fully functional and not damaged, of course. How to reattach a loose or missing screw on a spring hinge
How to fix broken eyeglasses?
With the second pushpin hanging around, line up the eyeglass frame/arm holes together. Use a pair of tweezers to insert your eyeglass screw through both holes. Finally, use a 1.2 mm flat-blade screwdriver to secure the arm to the frame. Presto-blamo! Your eyeglasses are fixed. The same procedure can be used on sunglasses without any problems.
How do I extend the spring hinge on my fixmas door?
Keep the gifts of Fixmas past, present, and future alive with new parts. Insert a pushpin through the hole and use it as leverage to extend the spring hinge outwards. Be careful not to push the pushpin into your finger, as opposed to the small notch that you've just uncovered.
Can spring hinges on glasses be repaired?
0:522:06How to Repair Broken Eyeglass Spring Hinges - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe've now removed the broken hinge. And actually welded a whole new spring casing on you got shouldMoreWe've now removed the broken hinge. And actually welded a whole new spring casing on you got should see where some of the marks are on the back end of the spring casing.
How do you reattach spring loaded glasses?
1:272:24Replace screw in spring hinge on your eyeglasses - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can get a total perfect hole. And into that hole is where you're going to drop your screw. IMoreAnd you can get a total perfect hole. And into that hole is where you're going to drop your screw. I have handy tweezers for that. But you can do with fingers because luckily that joint is pretty.
Can hinges on glasses be repaired?
The most common repairs on plastic eyeglass and sunglass frames are broken bridges and broken hinges on the front frame of the eyewear, or side arms also know as the temples. Most glasses have metal hinges that are fused in and can be extracted and replaced with a brand new one.
How do you reattach hinges on glasses?
1:064:04How to Fix a Broken Glasses Frame Hinge - YouTubeYouTubeStart of suggested clipEnd of suggested clipInside the housing here and you're able to reinsert a new screw. So the first thing that you'll needMoreInside the housing here and you're able to reinsert a new screw. So the first thing that you'll need is a pair of pliers. And I'm going to show you dressed how to tighten this part.
How do you get a glasses screw back in?
1:243:27Lost Screw - Fix Your Glasses With a Paperclip - Easy Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake your manufacturer to screw replacement. Put it in your pliers. And slide it down in there justMoreTake your manufacturer to screw replacement. Put it in your pliers. And slide it down in there just goes in easy like that and now you have an open D. So you take your pliers. And just slowly.
How do you put glasses back in frames?
0:091:10How to Re-Lens Glasses | Re-Lens Your Plastic Glasses OnlineYouTubeStart of suggested clipEnd of suggested clipYou're going to place the lens into the frame ensuring it's seated in the groove of the frame. FromMoreYou're going to place the lens into the frame ensuring it's seated in the groove of the frame. From there you can use pressure around the edges of the lens.
How can I fix my glasses arm hinges at home?
0:498:51How to Fix Broken Glasses at HOME - (and Adjust Them Too) - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlaces a cool pro tip is to use a lens cloth. And wrap it around the needle nose pliers. And thenMorePlaces a cool pro tip is to use a lens cloth. And wrap it around the needle nose pliers. And then you can use that lens cloth. And apply that to the outside.
What is a spring hinge on glasses?
Spring hinges are hinges that have a spring mechanism that allows the temples of a glasses frame attached to the hinge to extend beyond ninety degrees.
What are hinge rings for glasses?
Frame Grips / Hinge Rings (P101)Rubber hinge rings provide flexible tension for a secure and comfortable fit.To use, simply slip a frame grip over the eyeglass hinges.Pins and screws in eyeglass hinges cannot become loose or fall out.
How do you fix broken eyeglass hinges?
5:116:28Glasses Have Broken Hinge? Emergency Glasses Repair tips!YouTubeStart of suggested clipEnd of suggested clipBut that is a great way to do it you can apply that to a lot of different breaks on the metal frameMoreBut that is a great way to do it you can apply that to a lot of different breaks on the metal frame just. Because you're basically taking the two pieces. And you're putting them back together gently.
Are spring hinges better?
Spring hinges are better suited to the active wearer. Since spring hinges allow the temples to hug the head for a secure fit, these glasses will stay in place during running, jumping, or jogging. This makes them a better choice for the active adult, and for children.
How do you fix arm hinge tape on glasses?
1:242:56how to repair your glasses with tape - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen you put it up to your frame and just tape it around this tape is super sticky much moreMoreThen you put it up to your frame and just tape it around this tape is super sticky much more stickier than duct tape or anything like that so it will it will hold because it loves to stick to.
How do glasses hinges work?
Standard hinges (also known as barrel hinges) are the most common type of eyeglass hinges. The barrel hinge design features a series of metal rings (barrels) that fit into each other like a zipper, with a small screw that slides inside to keep the barrels in place.
How do you fix loose glasses?
If the glasses are loose - simply heat up the plastic temple part of the frame and bend the arms towards each other around the area of the temple tips. You can heat up the frame by using a hair dryer. Simply apply the heat for 20-30 seconds.
How do you fix eyeglass temples?
0:151:38How To Repair The Temple Tips On Your Eyeglasses - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd cut the tubing about three quarters of an inch longer than. The actual wire itself in theMoreAnd cut the tubing about three quarters of an inch longer than. The actual wire itself in the earpiece. Now heat the tubing to shrink it the tubing doesn't just shrink in diameter shrinks in length.
How do you tighten peeper glasses?
1:462:08How To Tighten Eyeglasses-Loose Or Wobbly Arm - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll that you have to do is look for a small screw that is around the area that is loose on theMoreAll that you have to do is look for a small screw that is around the area that is loose on the glasses. And just use a small screwdriver. With a small screwdriver.
How to extend a hinge on a glasses frame?
Pull on the temple to fully extend the spring hinge. Insert a paper clip or push pin into the gap that opened to keep the hinge in its extended position. Take the temple and align it with the glasses frame.
Why does my plunger retract?
Because of the mechanism described above, when the small temple screw is not or only partially inserted, the plunger retracts into the mechanism because of the spring. The barrel hole on the temple is attached to the plunger, so this causes the hole to misalign with the other hole on the glasses frame. Misaligned holes on a spring hinge.
Why do glasses have spring hinges?
Spring hinges are a great addition to any pair of eyeglasses. They let the temples (the long arms that rest on your ears) flex outwards, so that the glasses adjust to the shape of the head. This helps the glasses stay in place and makes them easier to wear for many people. It isn’t all positive, however.
What is a spring hinge?
Spring hinges, also known as flex hinges, contain a small spring that lets the arms of glasses extend further than other types of hinges do. With traditional barrel hinges, the movement is usually limited to 90°. With spring hinges, however, you can move the arms out a lot further. The benefits of spring hinges is that they provide more comfort, ...
What to do if a paper clip is too thick?
If the paper clip/push pin is too thick, you need to either sand it down a bit, or use something thinner like a needle. Make sure that you don’t use something fragile like a toothpick, because you don’t want it to break off and get stuck in the hinge mechanism.
What to do if a screw is stuck in a hinge?
So if the screw is still partially stuck in the hinge, you need to remove it first. Hook something onto the hole of the spring hinge. I used a precision screwdriver bit that was placed in a vise, but you can also use a push pin or paper clip that you hold with your other hand.
Can you fix eyeglasses with spring hinges?
Eyeglasses with spring hinges are more difficult to repair, and unless the spring hinges are of good quality, they are often the first thing to break in the glasses. Because of the way the hinges work, tightening or replacing a missing temple screw can be a tricky affair. In this article I will explain how eyeglasses spring hinges work, ...
Introduction
This repair video served as the inspiration for my guide. A big thanks to danliv99 from YouTube for helping me fix my glasses!
Step 1 Spring Hinge Screw
These are the tools I used to insert the screw through the spring hinge. In the video a paperclip was used, but the paperclip I had on-hand could not fit into the tiny recess in order to jam the spring open.
Step 2
The problem at hand: The screw will not fit through the arm because a spring is pulling on the hinge (and screw hole) in the arm.
Step 3
Insert a pushpin through the hole and use it as leverage to extend the spring hinge outwards.
Step 5
With the second pushpin hanging around, line up the eyeglass frame/arm holes together.
Step 6
To reassemble your device, follow these instructions in reverse order.
