how to repair jeans knee

^{Patching Knee of Jeans}

1. Materials. You will need a sewing machine, thread that is close in color to the denim, scrap denim*, scissors, pins, and an iron.
2. Make the Patch. Cut out your patch from the scrap denim. The patch should extend at least 1" beyond the edge of the hole or worn area.
3. Iron. Turn jeans inside out. Using your iron on a medium high setting, press the area of the hole so there are no wrinkles or puckers.
4. Overcast. Using the zig zag setting on your sewing machine, overcast stitch around the edge of the patch to hold it in place and prevent fraying.
Zig Zag. Zig zag stitch around the hole, then fill hole stitching the same direction the exposed white threads are going.
Finished. Now you're done! Did you make this project? Share it with us! We have a be nice policy. Please be positive and constructive.

Full Answer

How to mend tear in jeans by hand?

Method 1 Method 1 of 5: Mend a Small Hole or a Clean Tear by Hand

1. Cut loose threads away from the damaged area. You can fix some small holes without using a patch, simply by sewing the sides of the small hole or tear ...
2. Thread the needle and tie the knot properly. Placing a knot at the far end of the thread will anchor it in the fabric once you start sewing.
3. Sew over the edges of the hole to prevent further fraying. ...

More items...

How to repair ripped jeans without sewing?

Transform Your Jeans

• Creative Patchwork. As we went through earlier, the easiest fix for your damaged jeans is to cover the tear or hole with a fabric patch.
• Turn Your Jeans Into Shorts. A slightly more radical repair, this fix will change the way you use your jeans, so take some time to think if it’s really what ...
• Give Sewing A Go. I know, I know. ...

How to repair ripped jeans 3 ways?

Tips To Fix Your Ripped Jeans And Make It Awesome Again

• Attach Patches With Different Shapes. Ripped jeans are the best way to kindle your creativity and make your jeans attractive. ...
• Do The Embroidery Stitching. If you have several holes in your jeans, you can try embroidery stitching. ...
• Use Drawing Stitches To Cover The Ripped Area. ...
• Patch It With Lace. ...
• Cut Away The Portion And Patch It With Fabric. ...

How to prevent knee holes in jeans and pants?

Sew over the patch in horizontal lines.

• Double-check that you’re stitching over the patch pinned beneath your jeans.
• The back-stitching helps reinforce your patch around your inner thigh area.
• For a durable finish, use thick denim thread, along with a denim needle, like a 100/16 jeans needle. ...

How can I fix my jeans on the knee by hand?

13:5215:02How to: Add a Knee PATCH to Jeans | Fix a Rip or Hole in TrousersYouTubeStart of suggested clipEnd of suggested clipThis creates a diagonal stitch. And then you take the needle down through the same point again. AndMoreThis creates a diagonal stitch. And then you take the needle down through the same point again. And this time it comes up at the other edge of the patch. And this is how you Blanca stitch corners.

How do you fix a ripped jean knee without sewing?

1:295:09How to fix torn jeans (no sewing) - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst I'm to turn the jeans inside out I like to put plastic bags. Inside the legs to prevent theMoreFirst I'm to turn the jeans inside out I like to put plastic bags. Inside the legs to prevent the glue to go through and stick to the back side of the leg.

How do you fix a ripped jean knee without patch?

Hand sewing is the simplest way to mend a clean tear in which no actual fabric was lost. First, apply fabric mending tape under the damaged area using heat from an iron. Then, using thread that matches your torn jeans, sew an overcast stitch over the rip's edges.

Does fabric glue work on jeans?

3:254:33NO SEW JEAN REPAIR | Does fabric glue really work after ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust hanging out there and you don't want them you can just trim them off. So this glue so it's inMoreJust hanging out there and you don't want them you can just trim them off. So this glue so it's in two to six hours but I've literally glued a patch on and then put the jeans on and the glue is fine.

How do you do invisible mending?

2:313:27How to Use a Hand Sewn Blind Stitch to Fix a Tear - YouTubeYouTubeStart of suggested clipEnd of suggested clipAgain just um about eighth of an inch away from the edge of the rip depending as long as theMoreAgain just um about eighth of an inch away from the edge of the rip depending as long as the material isn't fraying. And you can put the needle in and it won't it won't be coming out. There.

How do you fix a hole in your pants without sewing it?

How to Fix A Hole in Pants Without Sewing: 3 Tricks to Fix Pant HolesMethod 1: Self-sticking garment tape.Method 2: Heat-activated hemming tape.Method 3: Fabric patch.

How do you fix a ripped seam without sewing?

Using hemming tape to mend a tear is another go-to method you can try. This will do the work without sewing. Hemming tape works like glue. If you heat it, the glue will melt and stick the fabrics together.

How do you use invisible mending tape?

0:003:15Iron-on Invisible Mending - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou cut a piece of the paper backed glue and cut it so that it's the size you need to cover yourMoreYou cut a piece of the paper backed glue and cut it so that it's the size you need to cover your patch leaving the paper in place I'm just going to press that err.

What stitch to use to repair thick denim?

Whip stitch is great or, as here, you can simply use a basic running stitch (or stab stitch, to make it easier to work if you are repairing thick denim) a short way from the oval edge. Whatever stitch you use, just make sure you are going through all the layers – both the garment and the patch underneath.

What to use to condition thread before sewing?

Beeswax, to condition your thread before sewing. Patch of fabric culled from an old garment of similar weight (or new fabric – but do pre-wash it so that it is pre-shrunk) Iron. Handy hint: always use a patch cut from fabric of about the same weight as the garment you’re repairing.

How to make a patch?

Tools and materials you’ll need: 1 Pins 2 Oval template: for example, the cardboard punch-out from the opening of a box of tissues, or an ‘O’ printed out in a super-enlarged font. You don’t need to work an oval; draw around a glass or a cookie cutter instead, but it’s good to keep the shape fairly simple until you’ve gained more patching experience 3 Pen/pencil for marking up 4 Fabric scissors or sharp craft scissors 5 Fabric glue or double-sided fabric tape (optional) 6 Hand-sewing needle 7 Cotton thread or other thread to match the fibre of the fabric you’re repairing 8 Beeswax, to condition your thread before sewing 9 Patch of fabric culled from an old garment of similar weight (or new fabric – but do pre-wash it so that it is pre-shrunk) 10 Iron

What happens if you leave thin material in place?

If you leave thin, weak material in place, it’s very likely to tear quite soon and wreck your hard-worked repair. So, the rule of thumb is to always make your patched area a little bigger than you think is necessary, and be sure that you’re working back into an area of sound fabric. 2 Creating an oval hole.

Can you repair elbows with a sewing machine?

This repair is all worked by hand, which might seem a bit slow. But knees and elbows tend to be hard to access by sewing machine, and a small repair project such as this will take a relatively short time to complete. Embrace it as an opportunity for relaxed, mindful hand-sewing – or ‘mendfulness’.

Can you patch with prewash?

Also, if you’re using new fabric to patch with, pre-wash (and therefore pre-shrink) it to give your repair the best chance of being effective and long-lasting. Again, if new fabric is sewn onto a previously worn and washed garment, it will very likely shrink and pull away from the garment, and the repair will fail.

Can you remove the arm from a sewing machine?

I am able to remove a portion of the sewing machine arm so that it is more narrow and I scrunch up the rest of the jeans around it if I have to. As long as everything is pinned down well you don't have to worry about too much shifting. If the jeans are super small you can open up a side seam to gain access and then re-sew it when you're done. The jeans patched in these photos are size 5T.

Can you patch jeans with colored thread?

I discovered jeans colored thread and have found that it's perfect for patching like this. I use a shorter zig zag stitch and basically make an embroidered patch directly on the garment (with a denim patch on the inside, of course--I originally learned to do this with interfacing, but after a while you get a mess). On some jeans, the patches are nearly invisible. Like you, I never cut the remaining threads, preferring to make them part of the patch for strength and color variation.

Where do jeans wear out?

The most common places for jeans to wear out is around the knee, the crotch area, and essentially anywhere the denim creases. It’s usually the warp yarn that breaks first. That’s because denim is warp-faced, meaning the warp yarn is worn the most. The wearing out is also accelerated as the warp stretches with wear.

Why do jeans last longer?

The short answer is because repairs are cool ! But repairs are obviously also a way to make your jeans last longer, which means you’ll be saving money in the long run—even when you’re paying for quality repairs. And as you’re wearing your jeans longer, you’ll be leaving a smaller footprint on the environment.

Why are raw jeans so popular?

One of the key reasons for raw denim’s revival—and the following revival of repairing jeans—is that breaking in jeans that aren’t pre-washed and -distressed creates a unique bond between garment and wearer.

What is a good hand made repair?

A good hand-made repair can transform an otherwise unattractive rip into a thing of total beauty. Machine darning is a strong counterpoint to an esoteric, yet historically based, repair technique like sashiko,” Tyler Madden says in Blue Blooded. He calls this kind of repair ’expressed,’ in other words decorative.

Why do we repair something?

“We repair the garment because it’s exactly right, because it’s ours, ” he says, “so it only makes sense to keep it going as long as possible—otherwise we would just have something else.”

When your grandfather's generation, and the generations before that, wore jeans as workwear, they needed pants that?

When your grandfather’s generation, and the generations before that, wore jeans as workwear, they needed pants that would last for a long as possible. So when the darn things ripped, your old man’s old man (and the old men before him) would get them fixed. The same goes with your raw denim jeans today.

Why do we press and iron suits?

Suits we want it to look like new. That’s why we press, iron and dry-clean them: to retain the newness of their appearance. Shabby, worn-out suits don’t communicate authority and professionalism; repairs and wear are not part of the language of suits.

What is the best way to repair a hole in jeans?

Darning is a patchless technique that repairs holes using needle and thread alone. Darning resembles weaving and is best for small holes that do not run along a seam. To repair jeans by darning, begin from the underside of the hole.

How to patch a hole in jeans?

Use a sewing machine to patch jeans from the inside. This method is particularly effective for large or small holes in the crotch of a pair of jeans. It's not a completely invisible mending technique, but the stitches are relatively undetectable. Use scissors to trim fraying threads around the edge of the hole.