- Unplug your NordicTrack treadmill from the power source.
- Unscrew the screws along both sides and the front of the motor hood with a Phillips screwdriver.
- With all of the screws removed, lift the motor hood up and out to detach it from the machine.
- Locate the reed switch on the left side of the belt pulley. It will appear like a black rectangle attached to a wire.
- Rotate the pulley until you review a small magnet next to the reed switch.
- Using your screwdriver, loosen the screw but do not remove it. You want it just loose enough so that you can manipulate it manually.
- With your hand, carefully move the switch until the gap between the magnet and the switch is only 1/8 of an inch.
- Tighten the screw to lock it in position.
- Replace the motor hood and fasten it with all of the screws that were previously removed.
Full Answer
What to do when your NordicTrack treadmill motor breaks?
How To Tackle It? The motor is an essential part of a Nordictrack treadmill. Some problems with dust, debris, or worn running belt can significantly affect the engine performance. When a motor breaks, you need to rebuild, repair, or replace it. This article will discuss the common Nordictrack treadmill motor problem.
How do I change the belt on my NordicTrack treadmill?
Unplug your NordicTrack treadmill from the power source. Unscrew the screws along both sides and the front of the motor hood with a Phillips screwdriver. With all of the screws removed, lift the motor hood up and out to detach it from the machine. Locate the reed switch on the left side of the belt pulley.
Are there any problems with Nordic track treadmills?
While Nordic Track produces some of the best-reviewed treadmills on the market, some customers have problems with their machines. The heart rate monitors that come standard with most of the treadmills may not display the right rate. You may also have problems with the walking belt, which can slow or stop if it's loose.
How do I get replacement parts for my NordicTrack device?
You can call NordicTrack’s toll-free number to inquire about purchasing replacement parts. Malfunctioning Display: If you’re experiencing issues with the functionality of your display, this can cause speed issues since the readings will not be correct. This is likely caused by the reed switch and magnet under the motor hood becoming too far apart.
See more
How do I fix my NordicTrack treadmill?
Check the Reset/Off circuit breaker if the power switches off while in use. Wait five minutes and switch the button to reset. Check that the power cord is still plugged in securely; pull the plug out and plug it back in after five minutes. Pull out the console key and reinsert to see if the machine will turn back on.
Why is my NordicTrack treadmill not working?
Check your outlet first, ensure the power cord is connected securely, that the cord and plug are free of damage. Now power cycle the machine by flipping the reset switch to off, then back to reset. Insert your key into the machine. If the power doesn't come on test the outlet by plugging in another appliance.
Why is my NordicTrack treadmill not moving?
Belt Tension If the belt is too tight, it could cause enough tension that the motor can't turn the belt. This is most likely the cause of your belt not moving if you recently adjusted the belt tension due to slippage. Lift the edge of the belt.
How long does a NordicTrack treadmill last?
According to what the manufacturers say, the average life of a treadmill is about 10 years. However, if you take care of your treadmill properly and lubricate the belt regularly, you can make it last longer.
How do you fix a treadmill that suddenly stops working?
Treadmills require lubrication to limit the amount of friction between the platform and belt. When the friction increases to a certain point, the machine is automatically set to power off. This may be the cause for the machine to stop working suddenly. Try lubricating the belt.
How do I know if my treadmill motor is bad?
3:574:59DIY - How to test your Treadmill motor. - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'm going to put one side on we'll put the other one on. And we're going to check the tension onMoreSo I'm going to put one side on we'll put the other one on. And we're going to check the tension on the belt. So we're going to see how hard it turns. Let's turn them pretty hard. If we take these off
How do you diagnose treadmill problems?
Start by checking if the power cord of the treadmill is tightly plugged into the wall socket. If the treadmill runs on batteries, check if they are healthy. Sometimes, resetting the circuit breaker does the trick. You can reset it by unplugging the treadmill for about 1 minute.
How do I reset my nordictrack treadmill to work?
As you insert the paper clip, press, and hold it down. As you hold the paper clip, have the second person flip the power switch back on. Once your machine's screen lights up, you may remove the paper clip. You will see the iFIT logo along with “system recovery: please wait…” highlighted in blue.
Is it worth fixing a treadmill?
It depends on your use for them, but yes, they are worth repairing more than replacing. Depending on the damage that has occurred, a simple belt replacement will not merit an overhaul. However, keep in mind that treadmill deck replacements cost differently. Treadmill motor repairs cost more as well.
Do treadmills need to be serviced?
Of all home fitness devices, the treadmill requires the most care and regular maintenance. This is due to its design: while you walk or run on the upper side of the treadmill's wide belt, the underside is constantly rubbing against parts such as the motor, the rollers, etc.
How do you know when you need a new treadmill?
Often, the belt on a treadmill will be an indication that your unit may need maintenance or a replacement. Look for frayed edges, a sluggish belt movement or if it feels like the belt is slipping when you are using the machine.
How do I reset my NordicTrack treadmill to work?
As you insert the paper clip, press, and hold it down. As you hold the paper clip, have the second person flip the power switch back on. Once your machine's screen lights up, you may remove the paper clip. You will see the iFIT logo along with “system recovery: please wait…” highlighted in blue.
Why does my treadmill turn on but not run?
If the motor control board activates the drive motor but the drive motor doesn't run, then you'll need to replace the drive motor. If you hear the drive motor buzz but it doesn't run, replace the drive motor.
Why will my treadmill not turn on?
Treadmill: Why won't my treadmill power up? A failed power supply, broken power cord, tripped circuit breaker switch, failed circuit breaker switch, bad power switch, wiring failure, bad motor control board or failed console display can prevent the treadmill from powering up.
Why is my NordicTrack screen blank?
With a paper clip or needle, press and hold the reset button. Plug the treadmill back in and turn it on. Continue holding the reset button until the screen turns back on, then you can release it. You should see a "Reinstalling the software" message and progress bar.